Our SRAN-Radio-Network-Performance-Optimization practice materials can be understood with precise content for your information, which will remedy your previous faults and wrong thinking of knowledge needed in this exam. As a result, many customers get manifest improvement and lighten their load by using our SRAN-Radio-Network-Performance-Optimization Actual Exam. It is well-known that our SRAN-Radio-Network-Performance-Optimization study guide can save a lot of time and effort. And with the simpilied content of our SRAN-Radio-Network-Performance-Optimization practice questions, you can have a wonderful study experience as well.
| Section | Weight | Objectives |
|---|---|---|
| Quality of Service and Resource Management | 15% | - QoS parameters, scheduling and admission control - Radio resource management and optimization |
| Coverage and Capacity Optimization | 30% | - Coverage analysis, tuning and optimization - Capacity planning, load balancing and optimization - Interference analysis and mitigation techniques |
| SRAN Performance Optimization Fundamentals | 25% | - Performance optimization principles and methodology - Network performance monitoring and analysis tools - Key performance indicators (KPIs) definition and measurement |
| Advanced Optimization and SON Features | 10% | - Self-Organizing Networks (SON) use cases and optimization - Energy saving and advanced features |
| Mobility and Handover Optimization | 20% | - Handover parameters and algorithms - Inter-RAT mobility and optimization - Mobility robustness and optimization |
>> SRAN-Radio-Network-Performance-Optimization Valid Test Topics <<
Candidates can reach out to the ExamcollectionPass support staff anytime. The ExamcollectionPass help desk is the place to go if you have any questions or problems. Time management is crucial to passing the Nokia SRAN-Radio-Network-Performance-Optimization exam. Candidates may prepare for the Nokia SRAN-Radio-Network-Performance-Optimization Exam with the help of ExamcollectionPass desktop-based SRAN-Radio-Network-Performance-Optimization practice exam software, web-based SRAN-Radio-Network-Performance-Optimization practice tests and Nokia SRAN-Radio-Network-Performance-Optimization pdf questions.
NEW QUESTION # 23
In the case of 5G SA, which of the following triggers the Radio Link Failure, or RLF, handling mechanism?
Answer: C
Explanation:
The correct answer is C.
In 5G SA, Radio Link Failure handling is mainly UE-driven. The UE monitors the radio link quality using lower-layer indications such as in-sync and out-of-sync indications. If the UE receives enough out-of-sync indications, it starts the relevant RLF timer, commonly associated with T310 behavior. If the link does not recover before the timer expires, the UE declares Radio Link Failure and starts recovery, such as RRC re- establishment.
The gNodeB can detect uplink problems and may release or reconfigure the UE, but the classical RLF handling mechanism is triggered at the UE side.
So the correct answer is:
UE indication timer only.
NEW QUESTION # 24
Which of the following best describes one of the primary purposes of the Coverage and Quality use case?
Answer: A
Explanation:
The correct answer is B .
The Coverage and Quality use case is used in network planning and optimization to identify RF problem areas. These may include:
Low RSRP or weak coverage areas
Poor SINR or low radio quality areas
High interference zones
Overshooting cells
Coverage holes
Areas where users experience poor throughput or poor accessibility
This type of use case helps NPO engineers prioritize optimization actions such as antenna tilt changes, azimuth changes, parameter tuning, neighbor optimization, power adjustment, or site expansion.
The other options are not the primary purpose:
VPN tunnel configuration is a connectivity/security task.
LCBIN-to-CSV conversion is a data processing task.
Replacing the Kronos parser is a tool-chain or troubleshooting function, not the main purpose of coverage and quality analysis.
So the best answer is:
To identify problem areas such as low coverage or high interference.
NEW QUESTION # 25
Evaluate the impact of extended FR2 cell range on power consumption.
Answer: C
Explanation:
The correct answer is C .
In FR2/mmWave , uplink coverage is often the limiting factor because UE transmit power is much lower than gNodeB transmit power, and mmWave propagation suffers from high path loss and blockage. Ericsson's mmWave coverage discussion also notes that high-band coverage is limited by uplink signal quality and high- band propagation characteristics.
When the FR2 cell range is extended, UEs farther from the serving cell must transmit uplink signals over a more difficult radio path. This usually requires higher UE transmit power, more robust MCS, more repetitions or retransmissions, and potentially longer uplink activity. As a result, UE battery consumption can increase.
Therefore, extended FR2 range generally:
Increases power consumption because UEs need more energy to transmit uplink signals.
NEW QUESTION # 26
What is the role of admission control in 5G networks ?
Answer: B
Explanation:
The correct answer is D .
Admission control is responsible for deciding whether a new UE connection, bearer, service, or session can be accepted by the cell without negatively affecting existing users and services.
In 5G RAN, admission control checks available radio resources such as:
* PRB availability
* PDCCH/PUCCH capacity
* UE context capacity
* QoS requirements
* GBR or non-GBR bearer requirements
* Cell load and congestion status
It does not directly manage modulation schemes; that is handled by link adaptation. It also does not directly increase spectral efficiency or optimize downlink throughput, although good admission control indirectly protects user experience and avoids overload.
So the main role of admission control is:
To check whether there are enough resources for new connections.
NEW QUESTION # 27
Choose the correct statement from the options below.
Answer: D
Explanation:
The correct answer is B .
Beamforming is mainly about shaping and directing radio energy toward a UE or a target area. It improves coverage, SINR, and cell-edge performance by focusing the transmitted or received signal in a specific direction.
MIMO , or Multiple Input Multiple Output , uses multiple antenna paths to improve throughput, reliability, and spectral efficiency. MIMO can be used for spatial multiplexing, diversity, or beamforming depending on the antenna system and radio configuration.
Option A is incorrect because beamforming and MIMO are related but not the same.
Option C reverses the definitions.
Option D is incorrect because beamforming and MIMO are commonly used together, especially in Massive MIMO systems.
So the correct statement is:
Beamforming focuses on directing the signal, while MIMO focuses on utilizing multiple paths for data transmission.
NEW QUESTION # 28
......
Thousands of MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 (SRAN-Radio-Network-Performance-Optimization) exam applicants are satisfied with our SRAN-Radio-Network-Performance-Optimization practice test material because it is according to the latest MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 (SRAN-Radio-Network-Performance-Optimization) exam syllabus and we also offer up to 1 year of free Nokia Dumps updates. Visitors of ExamcollectionPass can check the MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 (SRAN-Radio-Network-Performance-Optimization) product by trying a free demo. Buy the SRAN-Radio-Network-Performance-Optimization test preparation material now and start your journey towards success in the MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 (SRAN-Radio-Network-Performance-Optimization) examination.
Sample SRAN-Radio-Network-Performance-Optimization Test Online: https://www.examcollectionpass.com/Nokia/SRAN-Radio-Network-Performance-Optimization-practice-exam-dumps.html