What's more, part of that ActualPDF NSE5_FSW_AD-7.6 dumps now are free: https://drive.google.com/open?id=11R5BB6omqeykcQzPonBHDnW1qzhm4LEC
Here I would like to explain the core value of ActualPDF exam dumps. ActualPDF Practice NSE5_FSW_AD-7.6 Test dumps guarantee 100% passing rate. ActualPDF real questions and answers are compiled by lots of Fortinet experts with abundant experiences. So it has very high value. The dumps not only can be used to prepare for Fortinet certification exam, also can be used as a tool to develop your skills. In addition, if you want to know more knowledge about your exam, ActualPDF exam dumps can satisfy your demands.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
>> NSE5_FSW_AD-7.6 Exam Topics <<
Fortinet NSE 5 - FortiSwitch 7.6 Administrator NSE5_FSW_AD-7.6 exam practice material is available in desktop practice exam software, web-based practice test, and PDF format. Choose the finest format of Fortinet NSE 5 - FortiSwitch 7.6 Administrator NSE5_FSW_AD-7.6 exam questions so that you can prepare well for the Fortinet NSE 5 - FortiSwitch 7.6 Administrator exam. Our NSE5_FSW_AD-7.6 PDF exam questions are an eBook that can be read on any device, even your smartphone.
NEW QUESTION # 45
Which statement about the IGMP snooping querier when enabled on a VLAN is true?
Answer: D
Explanation:
Active multicast receiver entries are aging on each IGMP query sent on the VLAN (A): When IGMP snooping querier is enabled on a VLAN, it functions to manage multicast traffic within the VLAN by keeping track of multicast group memberships. The IGMP querier sends queries to determine which ports require the multicast traffic. The multicast receiver entries, which are entries that indicate which devices have requested the multicast data, age or time out based on these IGMP queries. Each query refreshes active connections but ages out entries that no longer respond, helping to ensure that multicast traffic is only sent to ports with active receivers.
NEW QUESTION # 46
(Full question statement start from here)
When you change FortiSwitch management mode fromstandalonetomanaged, what happens to the existing standalone configuration? (Choose one answer)
Answer: D
Explanation:
When a FortiSwitch is converted fromstandalone (local) management modetoFortiGate-managed mode using FortiLink, FortiSwitchOS follows a well-defined and protective transition process. According to the FortiSwitchOS 7.6 Administrator Guide, the switchdoes not mergeits existing standalone configuration with FortiLink-managed settings, nor does FortiGate import or preserve the active configuration for reuse.
Instead, when the management mode change occurs, the FortiSwitchsaves the current standalone configuration internallyand thenresets its operational configuration to the default FortiLink configuration. This default configuration is required so the switch can correctly establish FortiLink control- plane communication with the FortiGate, including CAPWAP-based management, VLAN 4094 usage, and dynamic policy provisioning.
Once the FortiSwitch is under FortiGate management,all configuration is controlled centrally by the FortiGate, including VLANs, port policies, security features, and firmware management. The previously saved standalone configuration is retained only as a backup reference on the switch and isnot actively used unless the switch is later reverted back to standalone mode.
This behavior ensures configuration consistency, prevents conflicts between local and centralized policies, and aligns the switch with the FortiGate-centricSecurity Fabric architecture. It also avoids unpredictable results that could occur if legacy standalone settings were merged with FortiLink-managed profiles.
The other options are incorrect because FortiSwitch does not register with FortiSwitch Cloud automatically, does not merge configurations, and FortiGate does not back up the standalone configuration during onboarding.
Therefore, the correct and fully documented answer isC. FortiSwitch saves the standalone configuration and changes to the default FortiLink configuration.
NEW QUESTION # 47
Refer to the exhibit.
You just connected three FortiSwitch devices:Core-1,Core-2, andAccess-1. Core-1 and Core-2 both connect to Access-1 for redundancy. All switches are managed by FortiGate, which uses port4 as the FortiLink interface. After you enable the uplink ports on Core-2, you notice that port3 on Access-1 enters the Discarding STP state. What is the most likely cause of this behavior? (Choose one answer)
Answer: B
Explanation:
According to theFortiSwitchOS 7.6 Administration Guideand theFortiLink 7.6 Study Guide, the Spanning Tree Protocol (STP) is automatically enabled on managed FortiSwitches to ensure a loop-free Layer
2 topology within the FortiLink fabric. When multiple physical paths exist between switches (as shown in the redundant connections between the Core and Access tiers), STP must block one of the paths to prevent a broadcast storm.
The behavior described in the exhibit-whereport3 on Access-1enters aDiscarding state-is a result of the STP election process. In a standard STP environment, switches elect aRoot Bridgebased on the lowestBridge Priority(or lowest MAC address as a tie-breaker). Once a root is established, other switches identify the
"best" path to that root (the Root Port) and block all other redundant paths.
The provided exhibit shows that Access-1 has two paths to the core: one to Core-1 and one to Core-2. The fact that the path to Core-2 is discarded suggests that the STP topology was recalculated when Core-2 was enabled. In the context of Fortinet technical exams for this specific scenario,Option C (Core-2 has the lowest bridge priority)is the standard answer identifying that Core-2's priority settings influenced the STP tree such that Access-1's link to it was determined to be the redundant (alternate) path.
If the switches were configured withMCLAG (Multi-Chassis Link Aggregation), both physical links would be treated as a single logical trunk, and neither would be in a discarding state. However, without MCLAG, the system relies on bridge priorities to prune the loop.BPDU Guard (Option A)is incorrect because it would administratively shut down the port rather than placing it in an STP "Discarding" state.Option Bis incorrect as the switch would not appear in the managed topology if unauthorized.
NEW QUESTION # 48
You are designing a multi-tenant network using FortiSwitch devices in standalone mode. Security is a priority and each tenant's servers must be completely isolated from one another, and from all other servers in the network, to prevent lateral communication. However, all servers must have access to the shared FortiGate firewall for internet access. Which type of private VLAN (PVLAN) configuration should you apply to meet these security requirements? (Choose one answer)
Answer: A
Explanation:
According to theFortiSwitchOS 7.6 Administration Guideand theFortiSwitch 7.6 Study Guide, Private VLANs (PVLANs) provide a mechanism to partition a regular VLAN (the Primary VLAN) into sub-VLANs to control Layer 2 traffic flow within the same broadcast domain.
In a multi-tenant environment requiring strict security, anIsolated VLAN (Option C)is the correct choice to prevent lateral communication between servers. The documentation specifies that ports within an Isolated VLAN are completely blocked from communicating with any other ports in the same Isolated VLAN or any Community VLANs. This effectively eliminates the risk of "east-west" traffic or lateral movement between tenant servers, even if they reside in the same physical switch and logical subnet.
However, the architecture of PVLANs ensures that these isolated ports can still communicate with Promiscuous ports. In this scenario, the shared FortiGate firewall would be connected to a Promiscuous port within thePrimary VLAN (Option D). This allows all tenant servers in the Isolated VLAN to send and receive traffic to the FortiGate for internet access and centralized security filtering, while remaining invisible to one another at the hardware layer.
Community VLANs (Option B)would be inappropriate for this specific requirement because ports within a Community VLANcancommunicate with each other, which violates the requirement for complete isolation between all servers. Therefore, the combination of an Isolated VLAN for the servers and a Promiscuous port for the firewall is the standard design for multi-tenant isolation in FortiSwitchOS 7.6.
NEW QUESTION # 49
Refer to the exhibit.
What two conclusions can be made regarding DHCP snooping configuration? (Choose two.)
Answer: A,D
Explanation:
Based on the DHCP snooping configuration details provided in the exhibit:
* B. FortiSwitch is configured to trust DHCP replies coming on FortiLink interface.The configuration segment shows "trusted ports : port2 FlInK1 MLAG0," indicating that the FortiSwitch is configured to trust DHCP replies coming from the specified ports, including the FortiLink interface labeled FlInK1.
This setup is critical in environments where the FortiLink interface connects directly to a trusted device, such as a FortiGate appliance, ensuring that DHCP traffic on these ports is considered legitimate.
* D. Global configuration for DHCP snooping is set to forward DHCP client requests on all ports in the VLAN.The "DHCP Broadcast Mode" set to 'All' under the DHCP Global Configuration indicates that DHCP client requests are allowed to broadcast across all ports within the VLAN. This setting is essential for environments needing broad DHCP client servicing across multiple access ports without restriction, facilitating network connectivity and management.
NEW QUESTION # 50
......
The modern Fortinet world is changing its dynamics at a fast pace. With the Fortinet NSE5_FSW_AD-7.6 certification, you can learn these changes and stay updated all the time. There are other countless Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) certification exam benefits that you can gain after passing the exam. The prominent Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) certification exam benefits are validation of skills, more career opportunity, salary increment, and the opportunity to become a member of the Fortinet community.
NSE5_FSW_AD-7.6 Reliable Test Simulator: https://www.actualpdf.com/NSE5_FSW_AD-7.6_exam-dumps.html
P.S. Free & New NSE5_FSW_AD-7.6 dumps are available on Google Drive shared by ActualPDF: https://drive.google.com/open?id=11R5BB6omqeykcQzPonBHDnW1qzhm4LEC