P.S. Free & New HPE7-A01 dumps are available on Google Drive shared by DumpsFree: https://drive.google.com/open?id=1HP3FMZbHre5s5wXthETRE5O-BXEtI935
The pass rate is 98% for HPE7-A01 training materials, and our exam materials have gained popularity in the international for its high pass rate. If you choose us, we can ensure that you can pass your exam just one time. In addition, HPE7-A01 exam dumps are high-quality, and you can use it with ease. You can obtain HPE7-A01 exam materials within ten minutes, and if you don’t receive, you can email to us, and we will solve this problem for you immediately. You can enjoy the free update for 365 days after purchasing, and the update version for HPE7-A01 Exam Braindumps will be sent to you automatically, you just need to exam your email and change your practicing ways according to the new changes.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: WLAN | 17% | - WLAN security and connectivity modes - WLAN architecture and AP deployment - RF fundamentals and optimization |
| Topic 2: Switching | 14% | - Layer 2 / Layer 3 switching implementation - High availability at access layer - VLAN design, trunking, spanning tree |
| Topic 3: Security | 9% | - Network security standards and policies - Secure access control and segmentation - Guest access and threat mitigation |
| Topic 4: Management and Monitoring | 6% | - Monitoring tools: SNMP, Syslog, NetFlow - Automation and API usage - Aruba Central management and monitoring |
| Topic 5: Network Stack | 4% | - 802.11, 802.1, and 802.3 technologies |
| Topic 6: Network Resiliency and Virtualization | 8% | - VSX, VSF, VRF, VxLAN technologies - Redundancy and fault tolerance mechanisms |
| Topic 7: Routing | 13% | - OSPF, policy-based routing implementation - Routing topologies and protocols |
| Topic 8: Performance Optimization | 7% | - QoS implementation and traffic management - Network performance tuning |
| Topic 9: Troubleshooting | 6% | - Performance and connectivity issue resolution - Fault isolation and troubleshooting methodologies |
| Topic 10: Connectivity | 8% | - Network device deployment - Network architectures and technologies |
| Topic 11: Authentication and Authorization | 8% | - AAA concepts and implementation - 802.1X, MAC authentication, ClearPass integration |
>> New HPE7-A01 Study Materials <<
As a powerful tool for a lot of workers to walk forward a higher self-improvement, DumpsFree continue to pursue our passion for advanced performance and human-centric technology. We aimed to help some candidates who have trouble in pass their HPE7-A01 exam and only need few hours can grasp all content of the exam. In recent years, our HPE7-A01 Test Torrent has been well received and have reached 99% pass rate with all our candidates. If you have a try on our HPE7-A01 exam questions, you will be glad about the wonderful quality.
NEW QUESTION # 20
Your Director of Security asks you to assign AOS-CX switch management roles to new employees based on their specific job requirements. After the configuration was complete, it was noted that a user assigned with the auditors role did not have the appropriate level of access on the switch.
The user was not allowed to perform firmware upgrades and a privilege level of 15 was not assigned to their role.
Which default management role should have been assigned for the user?
Answer: A
Explanation:
In AOS-CX switches, when assigning management roles to users that need to perform firmware upgrades and require a privilege level of 15, the role with the highest privileges should be chosen.
The "administrators" role typically provides full management access, including the ability to perform firmware upgrades and configure the switch. This role is suitable for users who need to perform advanced management and configuration tasks.
Other roles such as "sysadmin", "sysops", and "config" may provide certain levels of access but may not necessarily include the ability to perform firmware upgrades or have privilege level 15.
NEW QUESTION # 21
Your customer is having connectivity issues with a newly-deployed Microbranch group The access points in this group are online in Aruba Central, but no VPN tunnels are forming.
What is the most likely cause of this issue?
Answer: B
Explanation:
This is the most likely cause of the issue where the access points in a Microbranch group are online in Aruba Central, but no VPN tunnels are forming. A Microbranch group is a group that contains both APs and Gateways and allows them to form VPN tunnels for secure communication. The VPN tunnels use GRE (Generic Routing Encapsulation) as the encapsulation protocol and IPSec as the encryption protocol. If there is a firewall blocking GRE traffic between the AP and the gateway, the VPN tunnels cannot be established.
The other options are incorrect because they either do not affect the VPN tunnel formation or do not apply to a Microbranch group. References: https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/gateways/microbranch.htm https://www.arubanetworks.com/assets/tg/TB_ArubaGateway.pdf
NEW QUESTION # 22
You are troubleshooting an issue with a pair of Aruba CX 8360 switches configured with VSX Each switch has multiple VRFs. You need to find the IP address of a particular client device with a known MAC address.
You run the "show arp" command on the primary switch in the pair but do not find a matching entry for the client MAC address.
The client device is connected to an Aruba CX 6100 switch by VSX LAG. Which action can be used to find the IP address successfully?
Answer: A
Explanation:
The show arp command displays the ARP table for a specific VRF or all VRFs on the switch. The ARP table contains the IP address to MAC address mappings for hosts that are directly connected to the switch or reachable through a gateway. If the client device is connected to another switch by VSX LAG, the ARP entry for the client device will not be present on the primary switch unless it has communicated with it recently.
Therefore, to find the IP address of the client device, the administrator should run the show arp command on the secondary switch in the VSX pair, specifying the VRF name that contains the client device's subnet.
NEW QUESTION # 23
A customer just upgraded aggregation layer switches and noticed traffic dropping for 120 seconds after the aggregation layer came online again. What is the best way to avoid having this traffic dropped given the topology below?
Answer: A
Explanation:
The reason is that the linkup delay timer is a feature that delays bringing downstream VSX links up, following a VSX device reboot or an ISL flap. The linkup delay timer has two phases: initial synchronization phase and link-up delay phase.
The initial synchronization phase is the download phase where the rebooted node learns all the LACP+MAC+ARP+STP database entries from its VSX peer through ISLP. The initial synchronization timer, which is not configurable, is the required time to download the database information from the peer.
The link-up delay phase is the duration for installing the downloaded entries to the ASIC, establishing router adjacencies with core nodes and learning upstream routes. The link-up delay timer default value is 180 seconds. Depending on the network size, ARP/routing tables size, you might be required to set the timer to a higher value (maximum 600 seconds).
When both VSX devices reboot, the link-up delay timer is not used.
Therefore, by configuring the linkup delay timer to include LAGs 101 and 102, which are part of the same VSX device as LAG 201, you can ensure that both devices have enough time to synchronize their databases and form routing adjacencies before bringing down their downstream links.
NEW QUESTION # 24
A customer is looking for a wireless authentication solution for all of their loT devices that meet the following requirements:
- The wireless traffic between the IoT devices and the Access Points
must be encrypted
- Unique passphrase per device
- Use fingerprint information to perform role-based access
Which solutions will address the customer's requirements? (Select two.)
Answer: A,E
Explanation:
MPSK is a feature that allows device-specific or group-specific passphrases for WPA2 PSK- based deployments. The passphrases are generated by a RADIUS server such as ClearPass Policy Manager and sent to the APs. The wireless traffic between the IoT devices and the APs is encrypted using the passphrases. The passphrases can also be used to perform role-based access by mapping them to different VLANs and user roles. ClearPass Policy Manager is a network access control solution that can provide device fingerprinting and profiling for IoT devices based on various attributes such as MAC address, DHCP options, HTTP user agents, etc.
ClearPass Policy Manager can also integrate with other IoT platforms and services to enhance the visibility and security of IoT devices.
NEW QUESTION # 25
......
Our braindumps for HPE7-A01 real exam are written to highest standard of technical profession, tested by our senior IT experts and certified trainers. You can totally trust our HPE7-A01 exam prep materials because we guarantee the best quality of our products. With our latest HPE7-A01 Training Materials, you will pass the certification exam in your first try. We hope you clear exam successfully with our products.
Latest HPE7-A01 Braindumps Pdf: https://www.dumpsfree.com/HPE7-A01-valid-exam.html
BONUS!!! Download part of DumpsFree HPE7-A01 dumps for free: https://drive.google.com/open?id=1HP3FMZbHre5s5wXthETRE5O-BXEtI935