P.S. Kostenlose 2026 CBIC CIC Prüfungsfragen sind auf Google Drive freigegeben von ExamFragen verfügbar: https://drive.google.com/open?id=1JtDSL4Ykv6pLVcN6b4wwwkjACZtP8ViB
Es ist ganz einfach, die CBIC CIC Zertifizierungsprüfung zu bestehen, wenn Sie die Schulungsunterlagen zur CBIC CIC Prüfung von ExamFragen benutzen. Die Schulungsunterlagen zur CBIC CIC Zertifizierungsprüfung aus ExamFragen werden von den erfahrenen Experten durch ständige Praxis und Forschung bearbeitet. Die Trainingsmaterialien zur CBIC CIC Zertifizierungsprüfung aus unserer Webseite können Ihnen helfen, dass Sie die CIC Prüfung bei Ihrem ersten Versuch mühlos zu bestehen.
| Section | Weight | Objectives |
|---|---|---|
| Education and Research | 6-9% | |
| Preventing/Controlling the Transmission of Infectious Agents | 17-19% | |
| Cleaning, Sterilization, Disinfection, Asepsis | 10-13% | |
| Employee/Occupational Health | 10-13% | |
| Surveillance and Epidemiologic Investigation | 22-26% | |
| Identification of Infectious Disease Processes | 17-19% | |
| Environment of Care | 10-13% | |
| Management and Communication | 10-13% |
Die CBIC CIC Dumps von ExamFragen haben die sagenhafte Hit-Rate. Diese Dumps beinhalten alle mögliche Fragen in den aktuellen Prüfungen. Deshalb können Sie CBIC CIC Prüfungen sehr leicht bestehen, wenn Sie diese Dumps ernst lernen. Als eine sehr wichtige CBIC CIC Prüfung Zertifizierung spielt heute eine übergreifende Rolle. Deswegen können Sie die Chance nicht verlieren, die Prüfung zu bestehen. ExamFragen verspricht Ihnen volle Rückerstattung wenn durchgefallen. Informieren Sie bitte mehr an ExamFragen, wenn Sie die CIC Zertifizierungsprüfung bestehen wollen.
171. Frage
After reviewing quarterly surveillance data, the infection preventionist (IP) identifies an upward trend in needlestick injuries occurring during bedside blood draws. What is the MOST appropriate collaborative action for the IP to take with the Occupational Health Department?
Antwort: B
Begründung:
The CBIC Certified Infection Control Exam Study Guide (6th edition) emphasizes that when surveillance identifies an increasing trend in occupational exposures, such as needlestick injuries, the infection preventionist must take prompt, proactive, and collaborative action. The most appropriate response is to convene a multidisciplinary safety team in partnership with Occupational Health to perform a focused evaluation of the problem.
A multidisciplinary approach allows for comprehensive assessment of workflows, staffing practices, device selection, training, and compliance with standard precautions. Team members may include nursing leadership, frontline staff, occupational health, infection prevention, materials management, and safety officers. This collaboration supports root cause analysis to identify contributing factors-such as improper technique, workflow inefficiencies, inadequate training, or suboptimal safety-engineered devices-and to implement targeted interventions.
Option A is inappropriate because delaying action increases risk to healthcare personnel. Option B may be part of the evaluation but is too narrow and should not occur in isolation. Option D is insufficient because discussing trends alone does not result in immediate corrective action.
The Study Guide highlights that timely, interdisciplinary performance improvement efforts are essential to reduce occupational exposures and comply with regulatory and safety standards. Convening a multidisciplinary safety team enables rapid intervention, staff engagement, and sustainable injury reduction- making option C the best answer and a high-yield CIC exam concept.
172. Frage
Which of the following operating suite design features is LEAST important for the prevention of infection?
Antwort: C
Begründung:
The correct answer is A, "Type of floor material," as it is the least important operating suite design feature for the prevention of infection compared to the other options. According to the Certification Board of Infection Control and Epidemiology (CBIC) guidelines, the design of operating suites plays a critical role in infection prevention, particularly for surgical site infections (SSIs). While the type of floor material (e.g., vinyl, tile, or epoxy) can affect ease of cleaning and durability, its impact on infection prevention is secondary to other design elements that directly influence air quality, hygiene practices, and personnel movement (CBIC Practice Analysis, 2022, Domain III: Infection Prevention and Control, Competency 3.5 - Evaluate the environment for infection risks). Modern flooring materials are generally designed to be non-porous and easily disinfected, mitigating their role as a primary infection risk factor when proper cleaning protocols are followed.
Option B (positive pressure air handling) is highly important because it prevents the influx of contaminated air into the operating suite, reducing the risk of airborne pathogens, including those causing SSIs. This is a standard feature in operating rooms to maintain a sterile environment (AORN Guidelines for Perioperative Practice, 2023). Option C (placement of sinks for surgical scrubs) is critical for ensuring that surgical staff can perform effective hand and forearm antisepsis, a key step in preventing SSIs by reducing microbial load before surgery. Option D (control of traffic and traffic flow patterns) is essential to minimize the introduction of contaminants from outside the operating suite, as excessive or uncontrolled movement can increase the risk of airborne and contact transmission (CDC Guidelines for Environmental Infection Control in Healthcare Facilities, 2019).
The relative unimportance of floor material type stems from the fact that infection prevention relies more on consistent cleaning practices and the aforementioned design features, which directly address pathogen transmission routes. This aligns with CBIC's focus on evaluating environmental risks based on their direct impact on infection control (CBIC Practice Analysis, 2022, Domain III: Infection Prevention and Control, Competency 3.4 - Implement environmental cleaning and disinfection protocols).
References: CBIC Practice Analysis, 2022, Domain III: Infection Prevention and Control, Competencies 3.4 - Implement environmental cleaning and disinfection protocols, 3.5 - Evaluate the environment for infection risks. AORN Guidelines for Perioperative Practice, 2023. CDC Guidelines for Environmental Infection Control in Healthcare Facilities, 2019.
173. Frage
Surgical site infection (SSI) data for the previous quarter reveal the following numbers. The surgeon with the highest infection rate is Doctor
Antwort: C
Begründung:
To determine which surgeon has the highest surgical site infection (SSI) rate, use the following formula:
A screenshot of a report AI-generated content may be incorrect.
Since Dr. White has the highest SSI rate at 9.1%, the correct answer is D. White.
CBIC Infection Control Reference
SSI rates are calculated using infection count per total procedures and reported as percentage values.
174. Frage
When developing an exposure control plan, the MOST important aspect in the prevention of exposure to tuberculosis is:
Antwort: B
Begründung:
Tuberculosis (TB), caused by Mycobacterium tuberculosis, is an airborne disease that poses a significant risk in healthcare settings, particularly through exposure to infectious droplets. The Certification Board of Infection Control and Epidemiology (CBIC) emphasizes the "Prevention and Control of Infectious Diseases" domain, which includes developing exposure control plans, aligning with the Centers for Disease Control and Prevention (CDC) "Guidelines for Preventing the Transmission of Mycobacterium tuberculosis in Healthcare Settings" (2005). The question seeks the most important aspect of an exposure control plan to prevent TB exposure, requiring a prioritization of preventive strategies.
Option B, "Identification of a potentially infectious patient," is the most important aspect. Early identification of individuals with suspected or confirmed TB (e.g., through symptom screening like persistent cough, fever, or weight loss, or diagnostic tests like chest X-rays and sputum smears) allows for timely isolation and treatment, preventing further transmission. The CDC guidelines stress that the first step in an exposure control plan is to recognize patients with signs or risk factors for infectious TB, as unrecognized cases are the primary source of healthcare worker and patient exposures. The Occupational Safety and Health Administration (OSHA) also mandates risk assessment and early detection as foundational to TB control plans.
Option A, "Placement of the patient in an airborne infection isolation room," is a critical control measure once a potentially infectious patient is identified. Airborne infection isolation rooms (AIIRs) with negative pressure ventilation reduce the spread of infectious droplets, as recommended by the CDC. However, this step depends on prior identification; placing a patient in an AIIR without knowing their infectious status is inefficient and not the initial priority. Option C, "Prompt initiation of chemotherapeutic agents," is essential for treating active TB and reducing infectiousness, typically within days of effective therapy, per CDC guidelines.
However, this follows identification and diagnosis (e.g., via acid-fast bacilli smear or culture), making it a secondary action rather than the most important preventive aspect. Option D, "Use of personal protective equipment," such as N95 respirators, is a key protective measure for healthcare workers once an infectious patient is identified, as outlined by the CDC and OSHA. However, PPE is a reactive measure that mitigates exposure after identification and isolation, not the foundational step to prevent it.
The CBIC Practice Analysis (2022) and CDC guidelines prioritize early identification as the cornerstone of TB exposure prevention, enabling all subsequent interventions. Option B ensures that the exposure control plan addresses the source of transmission at its outset, making it the most important aspect.
References:
* CBIC Practice Analysis, 2022.
* CDC Guidelines for Preventing the Transmission of Mycobacterium tuberculosis in Healthcare Settings, 2005.
* OSHA Respiratory Protection Standard, 29 CFR 1910.134.
175. Frage
A city has a population of 150.000. Thirty new cases of tuberculosis (TB) were diagnosed in the city last year.
These now cases brought the total number of active TB cases in the city last year to 115. Which of the following equations represents the incidence rate tor TB per 100.000 in that year?
Antwort: A
Begründung:
The incidence rate is calculated using the formula:
Why the Other Options Are Incorrect?
* B. (30 ÷ 150,000) × 100 = X - Incorrect multiplier (should be 100,000 for standard incidence rate).
* C. (115 ÷ 150,000) × 100,000 = X - 115 represents total cases (prevalence), not incidence.
* D. (115 ÷ 100,000) × 100 = X - Uses the wrong denominator and multiplier.
CBIC Infection Control Reference
APIC defines the incidence rate as the number of new cases per population unit, typically per 100,000 people.
176. Frage
......
Wenn Sie die CBIC CIC (CBIC Certified Infection Control Exam) Zertifizierungsprüfung bestehen wollen, hier kann ExamFragen Ihr Ziel erreichen. Wir sind uns im Klar, dass Sie die die CIC Zertifizierungsprüfung wollen. Unser Versprechen sind die wissenschaftliche und qualitativ hochwertige Prüfungsfragen und Antworten zur CIC Zertifizierungsprüfung.
CIC Online Prüfung: https://www.examfragen.de/CIC-pruefung-fragen.html
P.S. Kostenlose und neue CIC Prüfungsfragen sind auf Google Drive freigegeben von ExamFragen verfügbar: https://drive.google.com/open?id=1JtDSL4Ykv6pLVcN6b4wwwkjACZtP8ViB