JN0-364 Valid Study Questions, New JN0-364 Cram Materials

BTW, DOWNLOAD part of ITExamDownload JN0-364 dumps from Cloud Storage: https://drive.google.com/open?id=1Wb6SnKc5ZwbQdDdnauWh-iEPuh3Ci8UP

High quality practice materials like our Juniper JN0-364 learning dumps exert influential effects which are obvious and everlasting during your preparation. The high quality product like our Service Provider Routing and Switching, Specialist (JNCIS-SP) JN0-364 Real Exam has no need to advertise everywhere, the exam candidates are the best living and breathing ads.

Juniper JN0-364 Exam Syllabus Topics:

SectionObjectives
Topic 1: Open Shortest Path First (OSPF)- Identify the concepts, operation, or functionality of OSPF
  • 1. Adjacencies and neighbors
  • 2. Router ID
  • 3. OSPF area and router types
  • 4. Link-state database
  • 5. OSPF packet types
  • 6. Designated router and backup designated router
  • 7. Link-state advertisement (LSA) packet type
- Demonstrate knowledge of how to configure, monitor, or troubleshoot OSPF
  • 1. Routing policy application
  • 2. Troubleshooting tools
  • 3. Interfaces and neighbor
Topic 2: Border Gateway Protocol (BGP)- Demonstrate knowledge of how to configure, monitor, or troubleshoot BGP
  • 1. Routing policy application
  • 2. Troubleshooting tools
  • 3. Peers and peer groups
- Identify the concepts, operation, or functionality of BGP
  • 1. IBGP and EBGP functionality and interaction
  • 2. BGP route reflection and confederations
  • 3. Attributes
  • 4. Route selection process
  • 5. BGP message types
  • 6. BGP basic operation
Topic 3: Protocol-Independent Routing- Demonstrate knowledge of how to configure, monitor, or troubleshoot various protocol-independent routing components
  • 1. Filter-based forwarding
  • 2. Static, aggregate, and generated routes
  • 3. Load balancing
- Identify the concepts, operation, or functionality of various protocol-independent routing components
  • 1. Filter-based forwarding
  • 2. Static, aggregate, and generated routes
  • 3. Routing instances, including routing information base (RIB) (also known as routing table) group
  • 4. Martian addresses
  • 5. Load balancing
Topic 4: Multiprotocol Label Switching (MPLS)- Demonstrate knowledge of how to configure, monitor, or troubleshoot MPLS
  • 1. LDP-signaled Label-Switched Paths (LSPs)
  • 2. Shortest path segment-routing LSPs
  • 3. MPLS forwarding
  • 4. RSVP-signaled Label-Switched Paths (LSPs)
- Identify the concepts, operation, or functionality of MPLS CoS processing on Junos devices
  • 1. Segment routing with MPLS
  • 2. End-to-end packet flow and forwarding
  • 3. RSVP
  • 4. MPLS terminology
  • 5. MPLS and routing tables
  • 6. LDP
  • 7. MPLS packet header
  • 8. Labels and the label information base
Topic 5: IPv6- Demonstrate knowledge of how to configure, monitor, or troubleshoot IPv6
- Identify the concepts, operation, or functionality of IPv6
  • 1. IPv6 over IPv4 tunneling
  • 2. Dynamic routing - OSPFv3, IS-IS, BGP
  • 3. Static routes
Topic 6: Layer 2 Bridging or VLANs- Identify the concepts, operation, or functionality of Layer 2 bridging for the Junos OS
  • 1. Virtual Switches
  • 2. Bridging elements and terminology
  • 3. Provider bridging (Q-in-Q tunneling)
  • 4. Service provider switching platforms
  • 5. Frame processing
- Demonstrate knowledge of how to configure, monitor, or troubleshoot Layer 2 bridging or VLANs
  • 1. VLANs
  • 2. IRB
  • 3. Interfaces and ports
  • 4. Provider bridging
- Identify the concepts, benefits, or functionality of VLANs
  • 1. Integrated Routing and Bridging (IRB)
  • 2. Port modes
  • 3. Tagging
Topic 7: Intermediate System to Intermediate System (IS-IS)- Demonstrate knowledge of how to configure, monitor, or troubleshoot IS-IS
  • 1. Routing policy application
  • 2. Troubleshooting tools
  • 3. Interfaces and adjacencies
- Identify the concepts, operation, or functionality of IS-IS
  • 1. Adjacencies and neighbors
  • 2. Levels and areas
  • 3. Link-state database
  • 4. Type, length, values (TLVs)
  • 5. Metrics
  • 6. Designated intermediate system (DIS)
  • 7. IS-IS protocol data units (PDUs)
Topic 8: Spanning Tree Protocols- Identify the concepts, operation, or functionality of STP
  • 1. VSTP
  • 2. MSTP
  • 3. STP
  • 4. RSTP
- Demonstrate knowledge of how to configure, monitor, or troubleshoot Spanning Tree Protocols
  • 1. VSTP
  • 2. MSTP
  • 3. STP
  • 4. RSTP

>> JN0-364 Valid Study Questions <<

New Juniper JN0-364 Cram Materials - JN0-364 Test Discount

The passing rate of our JN0-364 exam torrent is up to 98 to 100 percent, and this is a striking outcome staged anywhere in the world. They are appreciated with passing rate up to 98 percent among the former customers. So they are in ascendant position in the market. If you choose our JN0-364 question materials, you can get success smoothly. Besides, they are effective JN0-364 guide tests to fight against difficulties emerged on your way to success.

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q69-Q74):

NEW QUESTION # 69
You are troubleshooting a Level 1 IS-IS router that has an adjacency with a Level 1/2 router.
Which two statements are correct in this scenario? (Choose two.)

Answer: A,B

Explanation:
A Level 1/2 router maintains separate link-state databases for Level 1 and Level 2, treating them as two distinct topologies rather than merging them into a single topology.
A Level 1 router only participates in the Level 1 area and therefore only learns the topology information contained within the Level 1 link-state database.


NEW QUESTION # 70
Which BGP attribute is used to detect routing loops?

Answer: C


NEW QUESTION # 71
Which two statements are correct when using LDP? (Choose two.)

Answer: C,D

Explanation:
With Label Distribution Protocol (LDP), a full mesh of label-switched paths (LSPs) is automatically created between all LDP-enabled routers, and these paths are reflected in the inet.3 table. LDP LSPs are set up when LDP is enabled on interfaces connecting routers in an MPLS network.


NEW QUESTION # 72
Referring to the exhibit, what is the minimum number of LSPs required to support all four networks?

Answer: A

Explanation:
Given the RSVP Signaled Service Provider MPLS Core network shown in the exhibit, only a single Label Switched Path (LSP) is required to support all four networks because MPLS can use label stacking to multiplex multiple LSPs over a single physical path. Therefore, one LSP can be established through the MPLS core, and all networks can use this LSP with different label stacks.


NEW QUESTION # 73
Referring to the exhibit, how do you verify the status of the tunnel from R1?

Answer: C

Explanation:
To verify the status of the tunnel from R1, you would issue a ping from the source address that is assigned to R1's end of the tunnel. In the exhibit, we can see that the tunnel interface (gre-
0/0/0.0) has the IP address 198.51.100.1 on R1. Therefore, to test the tunnel's status, you should ping the IP address at the other end of the tunnel (which is likely the address on User B's interface or another interface on R2) from R1's tunnel source address.


NEW QUESTION # 74
......

If you intend to take the Juniper JN0-364 exam to open doors to high-paying jobs, you need an authentic Juniper JN0-364 practice exam material to get a passing score on the first attempt. Many people do not find a platform that is credible to purchase updated Juniper JN0-364 prep material. This leads to a waste of time and money, and ultimately failure in the JN0-364 exam.

New JN0-364 Cram Materials: https://www.itexamdownload.com/JN0-364-valid-questions.html

BONUS!!! Download part of ITExamDownload JN0-364 dumps for free: https://drive.google.com/open?id=1Wb6SnKc5ZwbQdDdnauWh-iEPuh3Ci8UP