2026 Latest Real4dumps VNX301 PDF Dumps and VNX301 Exam Engine Free Share: https://drive.google.com/open?id=1KEArqNdzwjTY0UHYqKd5XPfHRoVQxMp0
Versa Certified SD-WAN Specialist (VNX300) exam tests hired dedicated staffs to update the contents of the data on a daily basis. Our industry experts will always help you keep an eye on changes in the exam syllabus, and constantly supplement the contents of VNX301 test guide. Therefore, with our study materials, you no longer need to worry about whether the content of the exam has changed. You can calm down and concentrate on learning. At the same time, the researchers hired by VNX301 Test Guide is all those who passed the VNX301 exam, and they all have been engaged in teaching or research in this industry for more than a decade. They have a keen sense of smell on the trend of changes in the exam questions. Therefore, with the help of these experts, the contents of VNX301 exam questions must be the most advanced and close to the real exam.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
>> VNX301 Simulation Questions <<
The sources and content of our VNX301 practice dumps are all based on the real VNX301 exam. And they are the masterpieces of processional expertise these area with reasonable prices. Besides, they are high efficient for passing rate is between 98 to 100 percent, so they can help you save time and cut down additional time to focus on the VNX301 Actual Exam review only. We understand your drive of the certificate, so you have a focus already and that is a good start.
NEW QUESTION # 42
Which two methods would be used to upgrade deployed VOS branch devices? (Choose two.)
Answer: A,B
Explanation:
The correct answers are A and C . Versa supports upgrading deployed VOS branch devices either directly on the VOS appliance or centrally through Versa Director. The Director-based method is performed from the Administration > Appliances area: Versa documentation says to select one or more Controller nodes or VOS devices, click the Upgrade Selected Appliances icon, choose the software image package, and proceed with the appliance upgrade. The same upgrade procedure is referenced for remaining VOS branch devices, including the option to upgrade branches individually or all at once.
A CLI-based upgrade using a software .bin package is also a valid operational method when the image is copied to the device and installed locally, particularly for controlled or recovery-style maintenance.
Option B is not the best answer for already deployed branch upgrades because the Preferred Software Version field applies to zero-touch provisioning; Versa states that during ZTP, Director upgrades a branch to the preferred version if applicable. That setting influences onboarding behavior, not the normal upgrade workflow for already deployed branches. Option D is incorrect because System > Director Upgrade is used to upgrade the Versa Director node itself, not VOS branch appliances.
NEW QUESTION # 43
A CGNAT pool shows repeated alloc-failures and increasing free-failures . Which troubleshooting approach is most appropriate?
Answer: A
Explanation:
The correct answer is A . Versa CGNAT troubleshooting documentation provides a clear workflow for CGNAT issues. It first describes how to view CGNAT summary information using show orgs org-services < org > cgnat summary. It then shows how to view per-pool statistics using show orgs org-services < org > cgnat pools < pool-name > statistics. The sample output includes counters such as bindings-allocated , bindings-freed , alloc-failures , free-failures , out-of-address-errors , and out-of-ports-errors .
If these counters indicate failures, the next step is to inspect CGNAT state inside the vsmd daemon, including tenant state, ACL matching, pools, bindings, and source-port resources. This helps determine whether the issue is pool exhaustion, rule mismatch, resource allocation failure, or stale runtime state.
OSPF may affect routing but does not explain CGNAT allocation counters. Analytics may store logs but is not the dataplane authority for NAT allocation. Rebooting Analytics would not resolve CGNAT resource programming on the VOS device.
NEW QUESTION # 44
Examine the exhibit below.
An SD-WAN administrator has configured Direct Internet Access (DIA) for INET and INET-2 and wants to use SaaS Application Monitoring and SD-WAN policies to steer certain applications to the best Internet path on a certain VOS device.
Which two statements are true regarding the configuration shown in the exhibit? (Choose two.)
Answer: B,D
Explanation:
The correct answers are B and D . In the exhibit, the Next-Hop Selection Method is configured as Load Balance , and both INET and INET-2 have the same next-hop priority value of 1 . Versa SD-WAN guidance states that load balancing between WAN paths is achieved by configuring at least two circuits with equal priority. Therefore, when both INET and INET-2 satisfy the SLA requirements, sessions can be load-balanced across those two internet circuits.
Option D is also correct because the exhibit shows SLA Violation Action: Forward . This means that if no next hop is SLA-compliant, the VOS device is still allowed to forward traffic instead of dropping it. This behavior is consistent with Versa SD-WAN traffic-steering concepts, where forwarding profiles define circuit or path priorities, connection methods, load-balancing behavior, and SLA handling for traffic that matches an SD-WAN policy.
Option A is incorrect because the exhibit does not use the Automatic next-hop selection method. Versa' s performance-based SaaS optimization uses monitoring metrics to select the best path when configured for automatic/performance-based selection, but this exhibit shows Load Balance instead. Option C is not the best answer because LTE has lower priority 2 and would be considered only after the higher- priority INET and INET-2 paths are unavailable or unusable, not merely when one INET circuit fails.
NEW QUESTION # 45
A customer reports inconsistent application performance between two branches. You find that traffic is transmitted over the Internet circuit but returns over the MPLS circuit. Which CLI output field pair is most useful to confirm this asymmetry?
Answer: A
Explanation:
The correct answer is B . Versa documentation describes checking for asymmetrical SD-WAN paths when troubleshooting bandwidth and throughput issues. It gives the example of traffic being transmitted on one transport network and returning on another transport network that has different bandwidth. To check whether traffic is traversing an asymmetrical SD-WAN path, Versa recommends using show orgs org organization- name sessions sdwan brief.
In that output, the key fields are RX WAN CKT and TX WAN CKT . If the SD-WAN paths are symmetrical, the circuits shown in the RX and TX WAN circuit fields must be the same on the local and remote sites. If traffic goes out over Internet and returns over MPLS, throughput may differ depending on the bandwidth and quality of each circuit.
Source and destination zones are security-policy concepts, while BGP local preference and MED are routing attributes. Tenant ID and VSN ID identify context, but they do not directly prove directional WAN-circuit asymmetry.
NEW QUESTION # 46
You configured a Versa speed-test server on a VOS device, but the client cannot start the bandwidth test. A firewall exists between the client and server. Which port must be allowed through the firewall?
Answer: B
Explanation:
The correct answer is A . Versa link-bandwidth troubleshooting documentation explains that a VOS device can be configured as a Versa speed-test client, a Versa speed-test server, or both simultaneously. After the server is configured, the client starts the test by initiating a TCP-based connection toward the speed-test server. The server listens on port 5201 . The documentation includes an explicit note that if the VOS device is behind a firewall, port 5201 must be open .
This is different from the SD-WAN overlay data path, which commonly uses UDP-based transport encapsulation, and different from internet speed-test traffic, which uses other ports depending on the specific test type. In this scenario, the question states that a Versa speed-test server was configured, so the relevant requirement is TCP 5201 reachability from the client to the server.
TCP 443 may be used for management or web access, UDP 4790 is associated with SD-WAN transport encapsulation, and UDP 53 is DNS. None of those replace TCP 5201 for Versa speed-test server operation.
NEW QUESTION # 47
......
The Versa Certified SD-WAN Specialist (VNX300) (VNX301) is one of the popular exams of Versa Networks VNX301. It is designed for Versa Networks aspirants who want to earn the Versa Certified SD-WAN Specialist (VNX300) (VNX301) certification and validate their skills. The VNX301 test is not an easy exam to crack. It requires dedication and a lot of hard work. You need to prepare well to clear the Versa Certified SD-WAN Specialist (VNX300) (VNX301) test on the first attempt. One of the best ways to prepare successfully for the VNX301 examination in a short time is using real VNX301 Exam Dumps.
VNX301 Exam Labs: https://www.real4dumps.com/VNX301_examcollection.html
BONUS!!! Download part of Real4dumps VNX301 dumps for free: https://drive.google.com/open?id=1KEArqNdzwjTY0UHYqKd5XPfHRoVQxMp0