Außerdem sind jetzt einige Teile dieser ZertPruefung EDGE-Expert Prüfungsfragen kostenlos erhältlich: https://drive.google.com/open?id=18LljaDLaU-2M_iBo6Brw-NKyippm6BK1
Ob Sie glauben oder nicht, bieten wir die autoritativen und wirkungsvollen Prüfungsunterlagen der EDGE EDGE-Expert. Wir sind sehr bereit, die beste Hilfe der EDGE EDGE-Expert Prüfungsvorbereitung Ihnen anzubieten. Vielleicht brauchen Sie nur die Zertifizierung der EDGE EDGE-Expert, um Ihren Wunsch des Aufstiegs zu erfüllen. Wir wissen, dass man leicht den Impulskauf bereuen, deshalb empfehlen wir Ihnen, zuerst zu probieren und dann zu kaufen. Die Demo der Prüfungsunterlagen der EDGE EDGE-Expert können Sie auf unserer Website einfach herunterladen. Probieren Sie mal!
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Energy Efficiency | 25% | - HVAC Systems
|
| Topic 2: Financial & Results Analysis | 10% | - Results and outputs of EDGE
|
| Topic 3: EDGE System Overview | 15% | - Building Types & Applicability
|
| Topic 4: Software & Methodology | 25% | - Baseline & Proposed Building Models
|
| Topic 5: Water Efficiency & Materials | 25% | - Materials Embodied Energy (EE)
|
Die EDGE EDGE-Expert Prüfungsfragen und Antworten (EDGE-Expert) von ZertPruefung ist eine Garantie für eine erfolgreiche Prüfung! Bisher fällt noch keiner unserer Kandidaten durch! Falls jemand bei der Zertifizierungsprüfung durchfallen sollte, zahlen wir 100% Material-Gebühr zurück. Wir übernehmen die volle Geld-zurück-Garantie auf Ihre Zertifizierungsprüfungen! Unsere EDGE-Expert Fragen und Antoworten (Excellence in Design for Greater Efficiencies (EDGE Expert) Exam) sind aus dem Fragenpool, alle sind echt und original.
90. Frage
In the EDGE software, what is the unit of the embodied carbon of the material?
Antwort: C
Begründung:
Embodied carbon in EDGE refers to the carbon emissions associated with the production, transportation, and installation of building materials, a key metric for materials efficiency. The EDGE User Guide specifies how this is measured: "In the EDGE software, the embodied carbon of materials is quantified in kilograms of carbon dioxide equivalent (kgCO2), reflecting the total greenhouse gas emissions associated with the material' s lifecycle, from extraction to installation"(EDGE User Guide, Section 7.2: Materials Efficiency Measures).
Option A, kgCO2, directly matches this unit, as EDGE uses kgCO2 to standardize carbon emissions across materials, allowing for comparison and aggregation in the software's results. Option B (MJ) is incorrect, as MJ (megajoules) measures embodied energy, not carbon: "Embodied energy in EDGE is measured in MJ, representing the energy consumed in material production, while embodied carbon is separately calculated in kgCO2 to assess environmental impact" (EDGE Methodology Report Version 2.0, Section 6.1: Embodied Energy in Materials). Option C (BTU) is also incorrect, as BTU (British Thermal Units) is an energy unit not used in EDGE for carbon calculations: "EDGE uses metric units like MJ for energy and kgCO2 for carbon; BTU is not a standard unit in the software" (EDGE User Guide, Section 2.3: Using the EDGE App). Option D (kWh) is another energy unit, typically used for operational energy, not embodied carbon: "kWh is used in EDGE to measure operational energy consumption, such as electricity use, but not for embodied carbon, which is always in kgCO2" (EDGE Methodology Report Version 2.0, Section 5.2: Energy Calculation Methods). The EDGE User Guide further clarifies: "The software displays embodied carbon in kgCO2 to align with global carbon accounting standards, enabling users to understand the environmental footprint of their material choices" (EDGE User Guide, Section 7.2: Materials Efficiency Measures). The EDGE Methodology Report adds: "For example, concrete might have an embodied carbon of 0.15 kgCO2 per kg, allowing users to compare materials like fly ash concrete versus standard concrete in terms of carbon impact" (EDGE Methodology Report Version 2.0, Section 6.1: Embodied Energy in Materials). Thus, the unit of embodied carbon in EDGE is kgCO2 (Option A).
Reference:EDGE User Guide Version 2.1, Section 7.2: Materials Efficiency Measures, Section 2.3: Using the EDGE App; EDGE Methodology Report Version 2.0, Section 6.1: Embodied Energy in Materials, Section
5.2: Energy Calculation Methods.
91. Frage
What or who determines the baseline assumptions in EDGE?
Antwort: C
Begründung:
The baseline assumptions in EDGE software, known as the Base Case, are critical for calculating resource savings and are determined using standardized data. The EDGE Methodology Report explains: "Baseline assumptions in EDGE, referred to as the Base Case, are determined by market surveys of typical construction practices in the project's country, reflecting common materials, systems, and design practices for the selected typology and location" (EDGE Methodology Report Version 2.0, Section 3.1: Base Case Determination).
Option C, market survey of typical construction practices, aligns with this methodology. Option A (EDGE software users) is incorrect, as users do not set the baseline; they input project-specific data. Option B (EDGE Auditors) is also incorrect, as auditors verify compliance, not establish baselines. Option D (market survey of best construction practices) is wrong because EDGE uses typical practices, not best practices, to create a realistic benchmark, as clarified in the EDGE User Guide: "The Base Case reflects typical local practices, not best practices, to ensure a fair comparison for resource savings" (EDGE User Guide, Section 2.3: Using the EDGE App).
Reference:EDGE Methodology Report Version 2.0, Section 3.1: Base Case Determination; EDGE User Guide Version 2.1, Section 2.3: Using the EDGE App.
92. Frage
Which of the following properties of glass are used in EDGE?
Antwort: B
Begründung:
In the CBCI EDGE curriculum, glazing performance is characterized using properties that directly influence solar heat gains through windows, because this is a major driver of cooling energy demand in many climates.
The EDGE software uses Solar Heat Gain Coefficient, which represents the fraction of incident solar radiation that enters the building as heat through the glazing system. A lower SHGC reduces solar heat entering the indoor space, lowering cooling loads and improving the project's energy savings in the improved case.
Shading Coefficient is an older metric that is sometimes referenced in market literature, but EDGE standardizes the glazing solar performance input using SHGC for consistency across regions and products.
Solar Heat Loss Coefficient is not a standard glazing metric used in EDGE; heat loss through glazing is addressed using thermal transmittance measures such as U-value rather than an SHLC parameter. Solar Reflectivity may be relevant for certain roof or surface materials, but it is not the primary glazing property used in EDGE to quantify solar heat admitted indoors. Therefore, the correct glass property used in EDGE among the options provided is SHGC.
93. Frage
Which of the following describes a more efficient lamp?
Antwort: C
Begründung:
Lamp efficiency in EDGE is a key factor in reducing energy consumption for lighting, a critical green building design strategy. The EDGE User Guide defines lamp efficiency: "In EDGE, a moreefficient lamp is one that provides higher lumens per watt, meaning it produces more light output (lumens) for the same electrical input (watts). This metric, known as luminous efficacy, is used to evaluate lighting efficiency measures like EEM22 - Efficient Lighting for Internal Areas" (EDGE User Guide, Section 4.4: Lighting Efficiency Measures). Option A, more lumens/watt, directly aligns with this definition, as it indicates greater efficiency in converting electricity to light. Option B (lower watts/m²) refers to lighting power density, which is a design metric, not a lamp characteristic: "Watts/m² is a measure of lighting power density for a space, not the efficiency of an individual lamp" (EDGE Methodology Report Version 2.0, Section 5.4: Lighting Calculations). Option C (longer life) relates to durability, not efficiency: "Lamp life affects maintenance costs but is not a direct measure of energy efficiency in EDGE" (EDGE User Guide, Section 4.4: Lighting Efficiency Measures). Option D (lower wattage) alone does not indicate efficiency, as a lamp with lower wattage but poor light output would be less efficient: "Lower wattage must be paired with adequate lumens to improve efficiency" (EDGE Methodology Report Version 2.0, Section 5.4: Lighting Calculations). Thus, more lumens/watt (Option A) describes a more efficient lamp.
Reference:EDGE User Guide Version 2.1, Section 4.4: Lighting Efficiency Measures; EDGE Methodology Report Version 2.0, Section 5.4: Lighting Calculations.
94. Frage
Which of the following heating systems uses Coefficient of Performance (COP) as a measure of efficiency in the EDGE software?
Antwort: B
Begründung:
In EDGE, the Coefficient of Performance (COP) is used to measure the efficiency of heating systems that produce heat using a refrigeration cycle, such as heat pumps. The EDGE Methodology Report specifies: "The Coefficient of Performance (COP) is used in EDGE to evaluate the efficiency of heat pumps, including ground source heat pumps, where it is defined as the ratio of thermal output to electrical input. This metric is not applied to direct heating systems like electric heaters or boilers" (EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics). Option C, ground source heat pump, fits this description as it operates using a refrigeration cycle to transfer heat, and its efficiency is measured by COP in EDGE. Option A (electric heater) has an efficiency typically measured as 100% (or COP of 1), but EDGE does not use COP for such systems, as noted: "Electric heaters are assumed to have a fixed efficiency in EDGE, not evaluated via COP" (EDGE User Guide, Section 4.2: Energy Efficiency Measures). Option B (condensing boiler) uses thermal efficiency (%), not COP, as per: "Boilers in EDGE are assessed by their thermal efficiency, not COP" (EDGE Methodology Report Version 2.0, Section 5.2: Heating Systems). Option D (sensible heat recovery from exhaust air) is a heat recovery method, not a heating system, and does not use COP: "Heat recovery systems are evaluated by their heat recovery effectiveness, not COP" (EDGE User Guide, Section 4.3:
Ventilation Measures). Thus, ground source heat pump (Option C) is the correct choice.
Reference: EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics, Section 5.2:
Heating Systems; EDGE User Guide Version 2.1, Section 4.2: Energy Efficiency Measures, Section 4.3:
Ventilation Measures.
95. Frage
......
Wir alle wissen, dass die EDGE EDGE-Expert Zertifizierungsprüfung in der IT-Branche eine zentrale Position darstellt. Aber die Kernfrage ist, dass es schwer ist, ein EDGE EDGE-Expert Zertifikat zu erhalten. Wir wissen genau, dass im Internet relevanten Prüfungsmaterialien von guter Qualität fehlen. Die Examsfragen und Antworten von ZertPruefung können allen an den Zertifizierungsprüfungen teilnehmenden Prüflingen irgendwann die notwendigen Informationen liefern. Wir versprechen Ihnen, dass Sie Ihre EDGE EDGE-Expert Zertifizierungsprüfung einmalig bestehen können.
EDGE-Expert Vorbereitung: https://www.zertpruefung.ch/EDGE-Expert_exam.html
Übrigens, Sie können die vollständige Version der ZertPruefung EDGE-Expert Prüfungsfragen aus dem Cloud-Speicher herunterladen: https://drive.google.com/open?id=18LljaDLaU-2M_iBo6Brw-NKyippm6BK1