P.S. Free & New 350-101 dumps are available on Google Drive shared by Prep4sureGuide: https://drive.google.com/open?id=1JLEgsGUkKMbCpl_f6Bp7prIsA6juD7bO
Even in a globalized market, the learning material of similar 350-101 doesn't have much of a share, nor does it have a high reputation or popularity. In this dynamic and competitive market, the 350-101 study materials can be said to be leading and have absolute advantages. In order to facilitate the user real-time detection of the learning process, we 350-101 practice materials provided by the questions and answers are all in the past.it is closely associated, as our experts in constantly update products every day to ensure the accuracy of the problem, so all 350-101 practice materials are high accuracy.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
>> 350-101 Best Study Material <<
Cisco 350-101 practice test software contains many Cisco 350-101 practice exam designs just like the real Implementing and Operating Cisco Wireless Core Technologies (350-101) exam. These 350-101 practice exams contain all the 350-101 questions that clearly and completely elaborate on the difficulties and hurdles you will face in the final 350-101 Exam. We update our Cisco 350-101 exam questions bank regularly to match the changes and improve the quality of 350-101 questions so you can get a better experience.
NEW QUESTION # 106
To double the range of a transmitter, which value must the transmitter be changed to if it is currently at 17 dBm?
Answer: C
Explanation:
Doubling the range of a wireless transmitter does not require a linear increase in power due to theinverse- square law of RF propagation. Free-space path loss (FSPL) increases with the square of the distance, meaning to double the distance, the required power must increase by a factor of four in linear terms. In decibel units, power increases are logarithmic:10log10(4)#610 \log_{10}(4) \approx 610log10(4)#6dB.
Given a transmitter at 17 dBm, increasing its output by 6 dB to23 dBmwould theoretically double the coverage in free-space conditions. However, due to environmental factors like multipath, absorption, and antenna efficiency, Cisco RF design guides often round to practical increments, suggesting an increase from
17 dBm to27 dBmto achieve a robust doubling of coverage under real-world conditions.
Options A (20 dBm) and D (17 dBm) are insufficient because they do not provide the necessary power increase to overcome the logarithmic path loss for doubling range. Option C (100 dBm) is unrealistic and exceeds regulatory limits for enterprise wireless deployments. Proper power planning must balance coverage, interference, and regulatory compliance. Reference topic:RF Fundamentals - Free-space path loss, power control, and transmitter range planning in enterprise WLAN design.
NEW QUESTION # 107
A managed service is rolling out advanced wireless infrastructure to support an expanding organization with diverse device types. The implementation requires integration of dynamic endpoint profiling for secure access and device classification. According to the baseline deployment with ISE policy sets, the engineering group must enforce access parameters based on device category rules. Which configuration action must be taken to fulfill the initiative?
Answer: B
Explanation:
Dynamic endpoint profiling in Cisco wireless networks is used to classify devices based on type, behavior, and attributes, enabling policy enforcement that adapts to device posture. In a deployment integrated with Cisco ISE, profiling groups are created to define rules and categories for device types such as smartphones, laptops, printers, and IoT devices. These profiling groups allow the wireless controller to map devices to the correct ISE policy sets dynamically, ensuring that security policies, VLAN assignments, and access controls are applied according to the device profile. Option A (device-type groups) is a generic categorization that does not fully leverage ISE dynamic profiling capabilities. Option C (user ID groups) focuses on user identity rather than device characteristics. Option D (endpoint group mapping) is typically applied after device profiling and classification, but initial enforcement requires creating profiling groups. By configuring profiling groups, the IT team ensures that the network can classify endpoints automatically, enforce access policies consistently, and integrate with ISE for context-aware security and compliance monitoring. Reference topics:Wireless Monitoring and Management - Dynamic endpoint profiling, Cisco ISE policy integration, profiling groups, device classification for secure access.
NEW QUESTION # 108
Refer to the exhibit. A network engineer must create a PSK WLAN that will be anchored to the DMZ. After this WLAN is created, users cannot connect to it. Based on the output from the RA trace, which action must the engineer take to resolve the issue?
Answer: C
Explanation:
The failure is occurring during WPA/WPA2 key management, not during mobility anchoring. The radioactive trace shows Failed to validate eapol mic. MIC mismatch followed by Failed to validate eapol key m2, which means the authenticator and supplicant derived different key material during the PSK handshake. Cisco's Catalyst 9800 client-connectivity troubleshooting maps this log pattern directly to a wrong password condition and lists the corrective actions as fixing the password on the endpoint or on the SSID/WLAN. The 11r MIC validation failed phrase does not automatically make 802.11r the root cause; it only shows that the failed MIC validation occurred while Fast Transition key logic was in use. Disabling 802.11r would be a workaround only for client capability or FT interoperability issues, but the trace points to PSK mismatch. Removing the anchor WLC would break the intended DMZ anchoring design, and matching WLANs on foreign and anchor is required for anchor deployments, but it would not produce this EAPOL M2 MIC failure. The correct remediation is to ensure the client-entered PSK matches the WLAN PSK.
NEW QUESTION # 109
A network administrator at a marketing company manages a Cisco Catalyst 9800 Series Wireless Controller running Cisco IOS XE 17.x. The WLAN named XYZ-Guest is set up for visitors, and the administrator wants to implement a web authentication (WebAuth) portal using an external server to manage guest access. To ensure seamless and secure guest authentication, the controller must be configured to use an external WebAuth server for the WLAN. The administrator must configure the XYZ-Guest WLAN to use an external WebAuth server with a parameter map named webauth-ext. Which set of Cisco IOS XE commands must be used?
Answer: A
Explanation:
For configuring guest access on a Cisco Catalyst 9800 WLC using an external WebAuth server, the WLAN must be explicitly associated with the external server through a parameter map. The correct command syntax in Cisco IOS XE iswireless wlan < wlan-name > followed bysecurity web-auth external < parameter-map > .
This configuration links the WLAN to the external WebAuth server defined in the parameter map, allowing guests to be redirected to the portal for authentication. The parameter map (webauth-ext) contains details such as server IP, port, and other authentication parameters required for the external WebAuth interaction. Option B is incorrect because it improperly uses multiple WLAN names in one command, which is not valid syntax.
Option C usesparameter external security-map, which is invalid and does not associate the WLAN correctly with the WebAuth server. Option D incorrectly combines the security and parameter-map syntax and is not supported in IOS XE for external WebAuth. Cisco Wireless Core Technologies recommends this approach for centralized guest management, allowing consistent enforcement of guest policies, seamless authentication, and integration with external WebAuth servers across multiple WLANs and APs. Reference topics:Client Connectivity Configuration - WebAuth, external guest portal, WLAN parameter map configuration, Cisco IOS XE 17.x.
NEW QUESTION # 110
A network administrator at a marketing company is deploying a Cisco Catalyst 9800 Series Wireless Controller running Cisco IOS XE 17.x. The corporate WLAN named XYZ-Guest supports visitor devices. To address intermittent connectivity issues due to client association limits and short session timeouts, the network administrator must optimize the WLAN to allow more client connections and extend session timeouts for the devices. The administrator must set the maximum number of clients for the XYZ-Guest WLAN to 50 and must set a session timeout to prevent frequent device disconnections. Which two commands must be configured on the controller? (Choose two.)
Answer: A,C
Explanation:
The maximum client association limit is configured under the WLAN to control how many clients can connect to that WLAN. The session timeout is configured under the wireless policy profile to extend the allowed client session duration and reduce frequent disconnections.
NEW QUESTION # 111
......
Perhaps you have had such an unpleasant experience about 350-101 exam questions you brought in the internet was not suitable for you in actual use, to avoid this, our company has prepared 350-101 free demo in this website for our customers, with which you can have your first-hand experience before making your final decision. The content of the free demo is part of the content in our real 350-101 Study Guide. And you can see how excellent our 350-101 training dumps are!
Reliable 350-101 Source: https://www.prep4sureguide.com/350-101-prep4sure-exam-guide.html
DOWNLOAD the newest Prep4sureGuide 350-101 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1JLEgsGUkKMbCpl_f6Bp7prIsA6juD7bO