We can say that the Microsoft AZ-802 exam practice questions are real, valid, and updated Administering Windows Server (AZ-802) exam questions that will provide you with everything that you need to learn to prepare and pass the AZ-802 exam. The Microsoft AZ-802 Exam Questions will not only assist you in Administering Windows Server (AZ-802) exam preparation but also give you sight knowledge about the Administering Windows Server (AZ-802) exam topics that will help you in your professional career.
| Section | Objectives |
|---|---|
| Topic 1: Monitoring and troubleshooting | - Diagnostics
|
| Topic 2: Secure Windows Server hybrid infrastructures | - Security configuration
|
| Topic 3: Disaster recovery and migration | - Backup and restore
|
| Topic 4: Manage hybrid compute and virtualization | - Virtual machines
|
| Topic 5: Networking and storage infrastructure | - Storage management
|
| Topic 6: Implement and manage high availability | - Load balancing and redundancy
|
>> Microsoft AZ-802 Training Pdf <<
Hence, if you want to sharpen your skills, and get the Administering Windows Server (AZ-802) certification done within the target period, it is important to get the best Administering Windows Server (AZ-802) exam questions. You must try AZ-802 practice exam that will help you get the Microsoft AZ-802 certification. Pass4SureQuiz hires the top industry experts to draft the Administering Windows Server (AZ-802) exam dumps and help the candidates to clear their Administering Windows Server (AZ-802) exam easily. Pass4SureQuiz plays a vital role in their journey to get the AZ-802 certification.
NEW QUESTION # 43
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. Your network contains an Active Directory Domain Services (AD DS) domain named contoso.com. You implement a central store. You create a new Group Policy Object (GPO) named GPO1. When you attempt to edit GPO1, you see that the " Administrative Templates: Policy definitions (ADMX files) retrieved from the central store " node shows only two settings (far fewer than the normal full set of Administrative Template settings). You need to ensure that all settings are available. Solution: You copy the contents of the C:
\Windows\PolicyDefinitions folder to the central store. Does this meet the goal?
Group Policy Management Editor showing limited Administrative Templates settings
Answer: A
Explanation:
The documented root cause of only a couple of Administrative Template settings appearing is that the Central Store ' s PolicyDefinitions folder currently holds only a small, incomplete set of custom ADMX/ADML files
-- the full default set of Windows ADMX/ADML files (covering the normal complete range of Administrative Template settings) was never copied into it. Microsoft ' s own troubleshooting guidance for the Central Store specifically documents the fix as populating the store with the complete ADMX/ADML file set (including the appropriate language subfolder, such as en-US) sourced from a client machine ' s local C:
\Windows\PolicyDefinitions folder, merging in any needed custom templates rather than leaving the store with only a partial set. Copying the contents of the local C:\Windows\PolicyDefinitions folder into the Central Store does exactly this: it adds the full default set of ADMX/ADML files that had been missing, so that when any administrator subsequently edits GPO1 (or any other GPO) from a machine pointed at the Central Store, the Group Policy Management Editor now finds and displays the complete range of Administrative Template settings, not just the couple of custom entries that existed before. Best practice is to source this copy from an up-to-date, current-OS machine to avoid missing newer template definitions, but as a general action this directly and correctly addresses the documented root cause. Therefore, this solution meets the goal.
NEW QUESTION # 44
You have a failover cluster named Cluster1 that contains three Windows Server nodes named Node 1, Node2.
and Node3.
You need to deploy a Storage Spaces Direct virtual disk to Cluster1.
You add the following disks to each node:
* Three 512-6B NVMe disks
* Three 3-TB diskS
* Three 1-TB SSD disks
On Cluster1. you enable Storage Spaces Direct and add the new disks.
What is the total amount of disk space available for the Storage Spaces Direct virtual disk, and which operations are cached for the SSD and HDD disks? To answer, select the appropriate options in the answer area.
Answer:
Explanation:
Explanation:
Disk space available for the virtual disk: 36 TB. Cache behavior of the SSD disks: Only write operations are cached. Cache behavior of the HDD disks: Read and write operations are cached.
When three different drive media types are present together in a Storage Spaces Direct pool, the single fastest tier -- the NVMe drives in this deployment -- is automatically dedicated entirely to caching duties and contributes no usable capacity of its own to the pool at all, while the two remaining, slower tiers both serve as capacity drives that make up the pool ' s actual usable storage. With three nodes each contributing three 1-TB SSDs and three 3-TB HDDs as capacity drives, the total capacity-tier contribution works out to nine 1-TB SSDs plus nine 3-TB HDDs, which is 9 TB from the SSDs plus 27 TB from the HDDs, for a combined 36 TB of raw pool capacity; the nine 512-GB NVMe drives are excluded entirely from that total since they are cache- only. For the caching behavior itself, Microsoft documents that in a three-media-type deployment like this one, the NVMe cache tier performs write-only caching for the SSD capacity drives, since SSDs are already fast enough that read caching adds little benefit, but performs both read and write caching for the HDD capacity drives, since HDDs benefit far more from having their read operations accelerated by the much faster NVMe cache tier.
NEW QUESTION # 45
Your network contains an Active Directory Domain Services (AD DS) domain. The domain contains two servers named Server1 and Server2 that run Windows Server You need to use connection security rules to control the connections between Server1 and Server2. The solution must meet the following requirements:
* IPsec protection for Server1 and Server2 must be limited.
* Traffic between Server1 and Server2 must be authenticated and encrypted.
* Server2 must accept traffic from Server1 only if Server2 is authenticated by using IPsec.
How should you configure the connection security rules? To answer, select the appropriate options in the answe1 area.
NOTE: Each correct selection is worth one point
Answer:
Explanation:
Explanation:
Type of IPsec rule: Server-to-server rule. Firewall rule on Server2: Inbound port rule: Allow the connection if it is secure.
A server-to-server connection security rule protects traffic exchanged between two specific, explicitly defined endpoints, which is exactly the ' limited ' scope required here, since it applies only between Server1 and Server2 rather than isolating an entire domain or zone of the network the way an isolation rule would (isolation rules are built for domain- or network-wide policies restricting communication to only domain- joined or otherwise trusted computers, a much broader scope than two named servers). An authentication exemption rule only carves out exceptions from IPsec requirements for specified traffic or hosts and would not itself provide the authenticated, encrypted protection the scenario requires; a tunnel rule protects traffic between two gateway computers on behalf of other hosts behind them, which does not match a direct server- to-server relationship. Once the server-to-server connection security rule is defined to require authentication and encryption for traffic between the two servers, Server2 additionally needs an inbound firewall rule of type
' Allow the connection if it is secure, ' which permits inbound traffic from Server1 only when it arrives already authenticated and protected by the negotiated IPsec security association; a plain ' Allow the connection ' rule would accept the traffic regardless of whether it was secured, and outbound or predefined rule types do not enforce the requirement that Server2 accept Server1 ' s traffic only when it is IPsec- authenticated.
NEW QUESTION # 46
You have an Azure virtual machine named VM1 that runs Windows Server. You need to configure the management of VM1 to meet the following requirements: require administrators to request access to VM1 before establishing a Remote Desktop connection; limit access to VM1 from specific source IP addresses; limit access to VM1 to a specific management port. What should you configure?
Answer: C
Explanation:
The three requirements together describe just-in-time (JIT) VM access: administrators must request approval before an RDP connection is allowed, and once granted, access is restricted to specific source IP addresses and to a specific management port. JIT VM access is a capability of Microsoft Defender for Cloud (under the Defender for Servers plan); it dynamically locks down inbound rules on the VM ' s network security group and only opens the specified port, for the specified source IP addresses, for a limited time after an access request is approved. A network security group alone can restrict traffic by port and source IP, but it has no request-and-approval workflow or automatic time-limited opening/closing behavior - it only enforces whatever rules are already statically configured; it is really the mechanism JIT manipulates, not the solution that provides the request-approval layer. Microsoft Entra Privileged Identity Management manages time- bound elevation for Entra ID and Azure RBAC roles, not network-level port access. Azure Front Door is a global HTTP/HTTPS load balancer and application delivery service, unrelated to RDP access control.
Microsoft Defender for Cloud is therefore the correct configuration target.
NEW QUESTION # 47
You have a Group Policy Object (GPO) named GPO1 that contains user settings only. You plan to apply GPO1 to a global security group named Group1. You link GPO1 to the domain, and you remove all the permissions granted to the Authenticated Users group. You need to configure permissions for GPO1 to meet the following requirements: GPO1 must apply only to the users in Group1; the solution must use the principle of least privilege. Which permissions should you grant to Group1 and the Domain Computers group? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Group1: Apply group policy and Read. Domain Computers: Read only.
By default, Authenticated Users (which includes both user and computer accounts) is granted Read and Apply Group Policy on every new GPO, which is what lets any computer download and evaluate it and lets any signed-in user actually receive its settings; removing that default grant means both permissions must be explicitly re-established for exactly the principals that need them, and no more. Group1 contains the users who must actually receive GPO1 ' s user settings, so it needs both Read (to let the GPO be retrieved and evaluated at all) and Apply Group Policy (to let its settings actually take effect for those users); granting only one would leave the GPO unreadable, or readable but inert, for Group1 ' s members. Domain Computers is different: even though GPO1 contains only User Configuration settings, Group Policy processing on a computer still needs to enumerate and download every GPO linked to its scope in order to evaluate applicability (security filtering, WMI filters) before it can tell whether a given logged-on user should receive it. If Domain Computers has no Read permission at all, computers cannot process GPO1, which breaks correct evaluation for the very users in Group1 who sign in to those computers. Granting Domain Computers only Read - not Apply Group Policy, since GPO1 has no computer settings to apply and granting Apply would exceed least privilege - lets computers process the GPO correctly while ensuring only Group1 ' s members ever receive its settings.
NEW QUESTION # 48
......
Their updated Administering Windows Server (AZ-802) practice test material includes the latest and real AZ-802 questions that are very similar to those given in the actual Administering Windows Server (AZ-802) exam. Additionally, the Administering Windows Server (AZ-802) practice test software creates a realistic AZ-802 exam environment for users, and it also helps you in your preparation for the actual Administering Windows Server (AZ-802) test. Pass4SureQuiz offers the latest AZ-802 exam questions in multiple formats for convenience. These formats include Administering Windows Server (AZ-802) PDF dumps, AZ-802 Practice Test (web-based), and AZ-802 Practice Exam Software (Desktop-Based).
Reliable AZ-802 Test Review: https://www.pass4surequiz.com/AZ-802-exam-quiz.html