IT-Fachleute sind sehr beliebt. Aber die Konkurrenz ist zugleich auch sehr heftig. So beteiligen sich viele IT-Fachleute an der autoritären Fortinet NSEI_OTS_AR-7.6 IT-Zertifizierungsprüfung, um Ihre Position zu konsolidieren. Und unser It-Pruefung bietet speziell Bequemlichkeiten für den Fortinet NSEI_OTS_AR-7.6 Kandidaten.
| Section | Weight | Objectives |
|---|---|---|
| Network Security | 25% | - Virtual patching for legacy OT systems - Security automation and threat response - Deep inspection for industrial protocols (Modbus, DNP3, OPC) |
| Monitoring and Risk Assessment | 25% | - Threat detection using FortiSIEM 7.4 - OT-focused risk assessment and management - Event handling and logging with FortiAnalyzer 7.6 |
| Network Access Control | 25% | - Authentication and access policies for OT devices - OT Ethernet and industrial communication models - Purdue Model and secure network segmentation |
| Asset Management | 25% | - Device detection and inventory using FortiGate & FortiNAC - OT security standards and compliance (IEC 62443, NIST) - Fortinet Security Fabric for OT environments |
>> NSEI_OTS_AR-7.6 Zertifikatsfragen <<
Viele Menschen haben Sorgen darum, dass sie in der Prüfung durchfallen, auch wenn sie sich schon lange auf Fortinet NSEI_OTS_AR-7.6 Prüfung vorbereitet, nur weil sie nicht an der Prüfungsatmosphäre gewöhnt sind. Deshalb bieten wir Ihnen die Möglichkeit, vor der Prüfung die realistische Prüfungsatmosphäre zu erfahren. Fortinet NSEI_OTS_AR-7.6 Simulierte-Software enthält zahlreiche Prüfungsaufgaben mit ausführliche Erklärungen der Antworten von den Experten. Damit können Sie Ihre Fähigkeit verbessern und ausreichende Vorbereitung der Fortinet NSEI_OTS_AR-7.6 Prüfung haben.
15. Frage
Which characteristic do the following industrial protocols share: Ethernet/IP, EtherCAT, and POWERLINK?
Antwort: B
Begründung:
The correct answer is A . The study guide describes all three protocols as supporting deterministic or real-time industrial communication. Ethernet/IP uses standard Ethernet and TCP/IP with an application-layer mechanism that can provide real-time communication when deployed within an appropriate limited range.
EtherCAT explicitly provides real-time communication in a primary-secondary architecture and achieves its performance by skipping OSI layers 3 through 6. POWERLINK is also explicitly defined as a real-time communication protocol used mainly for transmitting process data. They do not all follow the complete OSI model because EtherCAT bypasses several layers and POWERLINK primarily uses layers 2 and 7. Client- server behavior is specifically associated with Modbus , and star/ring topology characteristics relate to redundancy mechanisms such as PRP, MRP, and HSR rather than these three industrial protocols collectively.
16. Frage
Refer to the exhibit.
A partial OT network is shown. In this OT network, you must add additional security measures to detect OT protocols and, therefore, increase the traffic visibility. Which security sensor must you implement to detect the OT protocols in this network? (Choose one answer)
Antwort: B
Begründung:
The correct answer is C. Application sensor set to monitor on all the FortiGate devices .
The study guide clearly explains that application control is the feature used to identify OT protocols. It states that "application control detects the protocols used in applications like Modbus, IEC 104, and the contents of the telecontrol messages" and also says "You can use application control signatures to detect OT protocols." It further shows an example where a Modbus application control profile is enabled on a firewall policy "for OT protocol visibility in the monitor status." This directly matches the requirement in the question, which is to detect OT protocols and increase traffic visibility .
The other options do not fit the requirement as precisely. Device detection is for identifying devices and collecting endpoint information, not for detecting industrial protocols. Inline IDS and IPS are focused more on detecting or blocking attacks, exploits, protocol abnormalities, and known vulnerabilities. While IPS can inspect some OT traffic, the study guide distinguishes it from application control by stating that IPS signatures tend to detect exploits, whereas application control signatures tend to provide protocol detection at various levels . Therefore, the required security sensor for OT protocol detection and traffic visibility is the application sensor in monitor mode .
17. Frage
Refer to the exhibit.
A basic event handler is shown. You have enabled Automation Stitch to automate the handling of an alert.
Which two steps must you take to use this automation stitch? (Choose two answers)
Antwort: A,C
Begründung:
The correct answers are C and D .
Option D is correct because the study guide states that the configuration of an event handler can include
"Rules" and explains that "Rules are granular conditions" and "Event handlers can have one or more rules." It further states that "FortiAnalyzer uses event handlers to filter all incoming logs" and "If logs match the conditions configured in an event handler, FortiAnalyzer generates an event." Therefore, to use the automation stitch, you must define the rules on FortiAnalyzer so the event handler can actually generate the event that starts the automation flow.
Option C is also correct. The study guide explains that "When a handler generates an event with the automation stitch option enabled, FortiAnalyzer sends a notification" to the FortiGate side, and in the attack-detection example it says "FortiAnalyzer parses the logs and notifies the root FortiGate" and then
"The root FortiGate triggers the action." It also explicitly shows "Stitches configured on root FortiGate." This means the FortiGate must have the corresponding automation trigger configured for the FortiAnalyzer event handler notification.
Option A is incorrect because the study guide does not describe configuring an Action on FortiAnalyzer as the required step for this FortiAnalyzer-to-FortiGate automation-stitch flow. Option B is also incorrect because playbooks are a different FortiAnalyzer automation mechanism; the question specifically refers to using the Automation Stitch option in the event handler.
18. Frage
Refer to the exhibit.
A partial OT network is shown. You have encountered many disconnections in the links and want to improve the availability of this network. Which action can you perform? (Choose one answer)
Antwort: A
Begründung:
The correct answer is C. You can implement parallel redundancy protocol . The study guide explains that media redundancy involves creating a backup path that can be used when part of the network fails and specifically states that "Parallel Redundancy Protocol (PRP) can be used for a star topology." Since the problem described is many disconnections in the links , the issue is link availability, which is a media redundancy problem rather than a firewall virtualization or policy separation problem. PRP is designed to provide a backup communication path with low recovery time when links fail.
The other options do not fit this scenario as well. HA clusters are described in the guide as a solution for network node redundancy , where a backup firewall or switch takes over when the primary device fails. SD- WAN is recommended for remote site access across multiple WAN links, not for the local floor links shown in this topology. VDOMs provide logical segmentation, not link redundancy or higher link availability.
Because the question is specifically about repeated link disconnections , the best action is to implement PRP .
19. Frage
Refer to the exhibits.
A partial Incident Analysis page and the log details related to the event are shown. An attack is reported on your OT network. You analyze the corresponding incident. Based on the information provided on the Incident Analysis page and the log details, which two statements are correct? (Choose two answers)
Antwort: D,E
Begründung:
Based on the technical data provided in the exhibits and the OT Security 7.6 Architect curriculum:
* Industrial Protocol Identification (Statement A) : The log details exhibit clearly shows that the Destination Port used in the attack is 502 . According to the study guide ' s section on Industrial Protocol Protection , the standard port used by the Modbus TCP protocol is 502 . Furthermore, the attack name identifies a " Triangle.Research.Nano-10.PLC, " which are industrial controllers commonly utilizing Modbus for communications.
* Attack Mitigation (Statement B) : The log details specify that the Action taken by the FortiGate (Edge-FortiGate) was dropped . In cybersecurity and Fortinet fabric operations, dropping a packet associated with an IPS signature means the traffic was blocked from reaching its target, thereby mitigating the attack.
* Target IP Address (Statement E) : The log detail explicitly lists the Destination IP as 192.168.2.3 .
The Incident Analysis page also titles the incident with dstip:192.168.2.3. While the " Affected Endpoint " is shown as 10.1.5.20 , in an " outgoing " attack direction (as shown in the log), this likely refers to the internal source/attacker IP, whereas the target is the destination IP (192.168.2.3). Thus, Statement E is incorrect.
* Protocol Conflict (Statement C) : The IEC 104 protocol typically utilizes port 2404 . Since the log specifies port 502, Statement C is incorrect.
* Severity Distinction (Statement D) : While the Incident severity is marked as High , the question specifically asks about event severity. The " Events " table at the bottom of the Incident Analysis page shows a " User login/logout failed " event with a medium severity. Because there is a distinction in the management console between the severity of individual events and the aggregated incident, and Statement A and B are technically definitive based on port and action, A and B are the correct architectural choices.
20. Frage
......
Während andere Leute noch überall die Prüfungsunterlagen für Fortinet NSEI_OTS_AR-7.6 suchen, üben Sie schon verschiedene Prüfungsaufgaben. Sie können im Vorbereitungsphase schon ganz vorne liegen. Wir It-Pruefung bieten Ihnen Fortinet NSEI_OTS_AR-7.6 Prüfungsunterlagen mit reichliche Ressourcen. Sie dürfen auch die ganz realistische Prüfungsumwelt der Fortinet NSEI_OTS_AR-7.6 Prüfung damit erfahren.
NSEI_OTS_AR-7.6 Testengine: https://www.it-pruefung.com/NSEI_OTS_AR-7.6.html