참고: Itexamdump에서 Google Drive로 공유하는 무료, 최신 100-150 시험 문제집이 있습니다: https://drive.google.com/open?id=1FcFzMb-dKRGDJqhAnPOVT0DyY7F98Glw
Itexamdump는 여러분의 꿈을 이루어줄 뿐만 아니라 일년무료 업뎃서비스도 따릅니다. Itexamdump에서 제공하는 덤프로 여러분은 1000%시험을 패스하실수 있고Cisco 100-150자격증을 취득하실 수 있습니다.지금 바로 사이트에서Cisco 100-150덤프데모 즉 덤프의 일부 문제와 답을 다운 받으셔서 체험하실 수 있습니다.
| 주제 | 소개 |
|---|---|
| 주제 1 |
|
| 주제 2 |
|
| 주제 3 |
|
Itexamdump는 오래된 IT인증시험덤프를 제공해드리는 전문적인 사이트입니다. Itexamdump의 Cisco인증 100-150덤프는 업계에서 널리 알려진 최고품질의Cisco인증 100-150시험대비자료입니다. Cisco인증 100-150덤프는 최신 시험문제의 시험범위를 커버하고 최신 시험문제유형을 포함하고 있어 시험패스율이 거의 100%입니다. Itexamdump의Cisco인증 100-150덤프를 구매하시면 밝은 미래가 보입니다.
질문 # 57
Move the security options from the list on the left to its characteristic on the right. You may use each security option once, more than once, or not at all.
Note: You will receive partial credit for each correct answer.
정답：
설명：
Explanation:
The correct matching of the security options to their characteristics is as follows:
* WPA2-Enterprise: Uses a RADIUS server for authentication
* WEP: Uses a minimum of 40 bits for encryption
* WPA2-Personal: Uses AES and a pre-shared key for authentication
Here's why each security option matches the characteristic:
* WPA2-Enterprise uses a RADIUS server for authentication, which provides centralized Authentication, Authorization, and Accounting (AAA) management for users who connect and use a network service.
* WEP (Wired Equivalent Privacy) is an outdated security protocol that uses a minimum of 40 bits for encryption (and up to 104 bits), which is relatively weak by today's standards.
* WPA2-Personal (Wi-Fi Protected Access 2 - Personal) uses the Advanced Encryption Standard (AES) for encryption and a pre-shared key (PSK) for authentication, which is shared among users to access the network.
These security options are essential for protecting wireless networks from unauthorized access and ensuring data privacy.
질문 # 58
A help desk technician receives the four trouble tickets listed below. Which ticket should receive the highest priority and be addressed first?
정답：A
설명：
An ongoing webinar is a time-sensitive business event; restoring its connectivity immediately minimizes organizational impact.
질문 # 59
HOTSPOT
You want to list the IPv4 addresses associated with the host name www.companypro.net.
Complete the command by selecting the correct option from each drop-down list.
정답：
설명：
Explanation:
To list the IPv4 addresses associated with the host name www.companypro.net, you should use the following command:
nslookup www.companypro.net
This command will query the DNS servers to find the IP address associated with the hostname provided. If you want to ensure that it returns the IPv4 address, you can specify the -type=A option, which stands for Address records that hold IPv4 addresses1. However, the nslookup command by default should return the IPv4 address if available.
To list the IPv4 addresses associated with the host name www.companypro.net, you should use the nslookup command.
Command: nslookup
Target: www.companypro.net
So, the completed command is:
nslookup www.companypro.net
nslookup: This command is used to query the Domain Name System (DNS) to obtain domain name or IP address mapping or for any other specific DNS record.
www.companypro.net: This is the domain name you want to query to obtain its associated IP addresses.
Reference: Using nslookup: nslookup Command Guide
질문 # 60
In the network shown in the following graphic, Switch1 is a Layer 2 switch.
PC-A sends a frame to PC-C. Switch1 does not have a mapping entry for the MAC address of PC-C.
Which action does Switch1 take?
정답：A
설명：
In a network, when a Layer 2 switch (like Switch1) receives a frame destined for a MAC address that is not in its MAC address table, it performs a flooding operation. This means the switch will send the frame out of all ports except the port on which the frame was received. This flooding ensures that if the destination device is connected to one of the other ports, it will receive the frame and respond, allowing the switch to learn its MAC address.
A). Switch1 queries Switch2 for the MAC address of PC-C: This does not happen in Layer 2 switches; they do not query other switches for MAC addresses.
A). Switch1 drops the frame and sends an error message back to PC-A: This is not the default behavior for unknown unicast frames.
D). Switch1 sends an ARP request to obtain the MAC address of PC-C: ARP is used by devices to map IP addresses to MAC addresses, not by switches to find unknown MAC addresses.
Thus, the correct answer is
B). Switch1 floods the frame out all active ports except port G0/1.
Reference: =
Cisco Layer 2 Switching Overview
Switching Mechanisms (Cisco)
질문 # 61
A user initiates a trouble ticket stating that an external web page is not loading. You determine that other resources both internal and external are still reachable.
Which command can you use to help locate where the issue is in the network path to the external web page?
정답：B
설명：
The tracert command is used to determine the route taken by packets across an IP network. When a user reports that an external web page is not loading, while other resources are accessible, it suggests there might be an issue at a certain point in the network path to the specific web page. The tracert command helps to diagnose where the breakdown occurs by displaying a list of routers that the packets pass through on their way to the destination. It can identify the network segment where the packets stop progressing, which is valuable for pinpointing where the connectivity issue lies.
Reference: =
Cisco CCST Networking Certification FAQs - CISCONET Training Solutions, Command Prompt (CMD): 10 network-related commands you should know, Network Troubleshooting Commands Guide: Windows, Mac & Linux - Comparitech, How to Use the Traceroute and Ping Commands to Troubleshoot Network, Network Troubleshooting Techniques: Ping, Traceroute, PathPing.
* tracert Command: This command is used to determine the path packets take to reach a destination. It lists all the hops (routers) along the way and can help identify where the delay or
failure occurs.
* ping -t: This command sends continuous ping requests and is useful for determining if a host is reachable but does not provide path information.
* ipconfig /all: This command displays all current TCP/IP network configuration values and can be used to verify network settings but not to trace a network path.
* nslookup: This command queries the DNS to obtain domain name or IP address mapping, useful for DNS issues but not for tracing network paths.
Reference:
* Microsoft tracert Command: tracert Command Guide
* Troubleshooting Network Issues with tracert: Network Troubleshooting Guide
질문 # 62
......
Cisco 100-150 덤프의 높은 적중율에 놀란 회원분들이 계십니다. 고객님들의 도와 Cisco 100-150 시험을 쉽게 패스하는게 저희의 취지이자 최선을 다해 더욱 높은 적중율을 자랑할수 있다록 노력하고 있습니다. 뿐만 아니라 Itexamdump에서는한국어 온라인서비스상담, 구매후 일년무료업데이트서비스, 불합격받을수 환불혹은 덤프교환 등탄탄한 구매후 서비스를 제공해드립니다.
100-150완벽한 덤프자료: https://www.itexamdump.com/100-150.html
참고: Itexamdump에서 Google Drive로 공유하는 무료 2026 Cisco 100-150 시험 문제집이 있습니다: https://drive.google.com/open?id=1FcFzMb-dKRGDJqhAnPOVT0DyY7F98Glw