PDFExamDumps 的 350-101 考古題包括了PDF電子檔和軟體考題形式，全新的收錄了Cisco 認證考試的所有試題，並根據真實的考題變化而不斷變化，參考考試指南編訂，而且適合全球考生適用。該 350-101 考古題是考試原題的完美組合，覆蓋率95%以上，答案由多位專業資深講師原版破解得出，正確率100%。你還可以點擊我們網站下載 350-101 考古題的demo，你會明白這才是你想要的。
| 主題 | 簡介 |
|---|---|
| 主題 1 |
|
| 主題 2 |
|
| 主題 3 |
|
| 主題 4 |
|
你是其中之一嗎，你是否還在擔心和困惑的各種材料和花哨的培訓課程考試嗎？PDFExamDumps是你正確的選擇，因為我們可以為你提供全面的考試資料，包括問題及答案，也是最精確的解釋，所有這些將幫助你掌握更好的知識，我們有信心你將通過PDFExamDumps的Cisco的350-101考試認證，這也是我們對所有客戶提供的保障。
問題 #119
A network engineer is deploying a new wireless monitoring solution in a large campus. The engineer must connect Cisco Spaces Connector, Cisco ISE, and a Catalyst Center appliance to the switch infrastructure. All three services require management and telemetry connectivity, and the security policy mandates segregation of management and user traffic. The engineer also must ensure that any network changes do not disrupt ongoing wireless services for users and staff. Which implementation must the engineer use on the switch interfaces?
答案：C
解題說明：
For campus wireless monitoring deployments involving Cisco Spaces, ISE, and Catalyst Center appliances, strict separation of management traffic from user data is required to maintain security and service continuity.
The correct approach is to configure the switch interfaces connecting these appliances as access ports assigned to the dedicated management VLAN. This ensures that management and telemetry traffic is isolated from production WLAN traffic, preventing any disruption to end users if configuration changes are made.
Assigning the management VLAN as the native VLAN on trunk ports (Option B) is inappropriate because the native VLAN still transmits untagged traffic and could allow accidental bridging with user traffic, violating security policies. PortFast (Option A) is used for rapid STP convergence on end-user ports but does not enforce VLAN separation or management isolation. Port Aggregation Protocol (Option C) is intended for link bundling and redundancy, not VLAN segmentation. Cisco Wireless best practices emphasize access port configuration for management appliances in a dedicated VLAN to guarantee security, telemetry reliability, and non-disruptive network operations. Proper implementation involves assigning a unique VLAN ID for all monitoring and management devices and configuring the switch port as an access port, ensuring consistent isolation and predictable behavior in a high-density campus environment. Reference topics:Wireless Monitoring and Management - Cisco Spaces deployment, ISE integration, management VLAN isolation, switch access port configuration.
問題 #120 
Refer to the exhibit. An engineer configured a static IP address on a LWAPP, but it is not reachable for management. The engineer configured the wrong gateway and must now change the default gateway to
172.16.100.1. Which CLI command must the engineer use?
答案：D
解題說明：
When deploying a Lightweight Access Point (LWAPP) in a Cisco wireless network, proper Layer 3 configuration is essential for management and connectivity to the Wireless LAN Controller (WLC). Each LWAPP requires a valid IP address, subnet mask, and default gateway to communicate beyond its local subnet. In the exhibit, the AP is assigned 172.16.100.104/24, but the previously configured gateway was incorrect, preventing communication with the WLC. Cisco IOS XE requires that the AP's IP interface be configured with the correct default gateway to route traffic properly. The correct syntax iscapwap ap ip < AP- IP > < Subnet-Mask > < Default-Gateway > . Option D matches the IP, subnet mask, and gateway for the given network, ensuring the AP can reach the WLC for LWAPP registration. Option A only changes the gateway without setting the IP explicitly, which is insufficient if the IP needs adjustment. Option B incorrectly configures the controller's IP, which does not affect the AP's default gateway. Option C uses an incorrect subnet mask (255.255.255.192), which would place the AP in a different subnet, breaking connectivity. Proper default gateway configuration is critical to avoid registration failures and management issues. Reference topics:Client Connectivity Configuration - LWAPP AP IP configuration, default gateway, WLC communication, Layer 3 reachability.
問題 #121
An enterprise requires certificate-based wireless authentication for employees. Which EAP method provides mutual authentication using client and server certificates?
答案：D
解題說明：
EAP-TLS uses certificates on both the client and authentication server, providing strong mutual authentication and eliminating password-based vulnerabilities. PEAP relies on passwords within a protected tunnel, while LEAP is deprecated due to known security weaknesses.
問題 #122
What does an elevated noise floor indicate in an RF environment?
答案：C
解題說明：
An elevated noise floor indicates degraded RF conditions and directly reduces wireless link reliability. Cisco defines the noise floor as the ambient RF noise level, expressed in dBm, below which received signals are unintelligible. Cisco also defines SNR as the ratio of signal strength to the noise floor, meaning that when the noise floor rises, the usable separation between the desired signal and background RF energy decreases.
For a receiver to decode frames reliably, the received signal must remain sufficiently above the noise floor.
Cisco site-survey guidance states that RF signals must be higher than the noise floor to be detectable as valid useful signals, and gives the common design example of -67 dBm signal with a -92 dBm noise floor to maintain 25 dB SNR. When the noise floor is elevated, SNR drops, clients experience more retries, lower modulation rates, reduced throughput, and possible disconnects. Cisco's high-density wireless guidance states that raised noise floor lowers SNR, translating to lower speeds and higher airtime utilization. Options B, C, and D describe unrelated timing, spectrum-planning, or bandwidth-demand concepts. Reference topics:RF Fundamentals - noise floor, SNR, RSSI, RF interference, retries, and wireless link quality.
問題 #123
An engineer configures a guest WLAN with web authentication. Users can reach the login portal but fail to access internet resources after authentication succeeds. Which configuration should be verified first?
答案：B
解題說明：
If authentication succeeds but internet access fails, incorrect ACLs or user role assignments are common causes. The guest policy may unintentionally block external traffic after login. DHCP or RF issues typically prevent connectivity earlier in the process rather than after successful authentication.
問題 #124
......
作為IT認證考試相關資料的專業提供者，PDFExamDumps一直在為考生們提供優秀的參考資料，並且幫助了數不清的人通過了考試。PDFExamDumps的350-101考古題可以給你通過考試的自信，讓你輕鬆地迎接考試。利用這個考古題，只要你經過很短時間段額準備你就可以通過考試。覺得不可思議嗎？但是，這是真的。只要你用，PDFExamDumps就可以讓你看到奇跡的發生。
350-101考證: https://www.pdfexamdumps.com/350-101_valid-braindumps.html