%20Newest%20Reliable%20Exam%20Answers)
DOWNLOAD the newest PDFBraindumps SAP-C02 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1wtk9-Xr4thtl2pDPOWOAAfX3KfjHsNGO
Once the user has used our SAP-C02 test prep for a mock exercise, the product's system automatically remembers and analyzes all the user's actual operations. The user must complete the test within the time specified by the simulation system, and there is a timer on the right side of the screen, as long as the user begins the practice of SAP-C02 quiz guide, the timer will run automatic and start counting. If the user does not complete the mock test question in a specified time, the practice of all SAP-C02 valid practice questions previously done by the user will automatically uploaded to our database. The system will then generate a report based on the user's completion results, and a report can clearly understand what the user is good at. Finally, the transfer can be based on the SAP-C02 Valid Practice Questions report to develop a learning plan that meets your requirements. With constant practice, users will find that feedback reports are getting better, because users spend enough time on our SAP-C02 test prep.
| Section | Weight | Objectives |
|---|---|---|
| Design Solutions for Organizational Complexity | 26% | - Design for compliance and governance requirements - Design multi-account and multi-region architectures - Design hybrid and multi-cloud networking - Design for operational excellence and automation |
| Continuous Improvement for Existing Solutions | 25% | - Optimize existing workloads for cost, performance, and security - Implement monitoring, logging, and observability - Apply security best practices and compliance updates - Refactor and modernize legacy applications |
| Design for New Solutions | 29% | - Design cost-optimized architectures - Design high-performing and scalable solutions - Design for reliability and fault tolerance - Design secure and resilient architectures |
| Accelerate Workload Migration and Modernization | 20% | - Migrate applications, data, and infrastructure - Integrate AWS services with existing systems - Modernize applications and data platforms - Develop migration strategies and plans |
>> Reliable SAP-C02 Exam Answers <<
Dear candidates, have you thought to participate in any Amazon SAP-C02 exam training courses? In fact, you can take steps to pass the certification. PDFBraindumps Amazon SAP-C02 Exam Training materials bear with a large number of the exam questions you need, which is a good choice. The training materials can help you pass the certification.
NEW QUESTION # 128
A financial services company sells its software-as-a-service (SaaS) platform for application compliance to large global banks. The SaaS platform runs on AWS and uses multiple AWS accounts that are managed in an organization in AWS Organizations. The SaaS platform uses many AWS resources globally.
For regulatory compliance, all API calls to AWS resources must be audited, tracked for changes, and stored in a durable and secure data store.
Which solution will meet these requirements with the LEAST operational overhead?
Answer: C
Explanation:
Explanation
The correct answer is C. This option uses AWS CloudTrail to create a trail in the organization's management account that applies to all accounts in the organization. This way, the company can centrally manage and audit all API calls to AWS resources across multiple accounts and regions. The company also needs to create a new Amazon S3 bucket with versioning turned on to store the logs. Versioning helps protect against accidental or malicious deletion of log files by keeping multiple versions of each object in the bucket. The company also needs to enable MFA delete and encryption on the S3 bucket to further enhance the security and durability of the data store.
Option A is incorrect because it uses an existing S3 bucket in the organization's management account to store the logs. This may not be optimal for regulatory compliance, as the existing bucket may have different permissions, encryption settings, or lifecycle policies than a dedicated bucket for CloudTrail logs.
Option B is incorrect because it requires creating a new CloudTrail trail in each member account of the organization. This adds operational overhead and complexity, as the company would need to manage multiple trails and S3 buckets across multiple accounts and regions.
Option D is incorrect because it requires configuring Amazon SNS to send log-file delivery notifications to an external management system that will track the logs. This adds unnecessary complexity and cost, as CloudTrail already provides log-file integrity validation and log-file digest delivery features that can help verify the authenticity and integrity of log files.
NEW QUESTION # 129
A medical company is running an application in the AWS Cloud. The application simulates the effect of medical drugs in development.
The application consists of two parts configuration and simulation The configuration part runs in AWS Fargate containers in an Amazon Elastic Container Service (Amazon ECS) cluster. The simulation part runs on large, compute optimized Amazon EC2 instances Simulations can restart if they are interrupted The configuration part runs 24 hours a day with a steady load. The simulation part runs only for a few hours each night with a variable load. The company stores simulation results in Amazon S3, and researchers use the results for 30 days. The company must store simulations for 10 years and must be able to retrieve the simulations within 5 hours Which solution meets these requirements MOST cost-effectively?
Answer: C
NEW QUESTION # 130
A company is subject to regulatory audits of its financial information. External auditors who use a single AWS account need access to the company's AWS account. A solutions architect must provide the auditors with secure, read-only access to the company's AWS account. The solution must comply with AWS security best practices.
Which solution will meet these requirements?
Answer: C
Explanation:
Explanation
This solution will allow the external auditors to have read-only access to the company's AWS account while being compliant with AWS security best practices. By creating an IAM role, which is a secure and flexible way of granting access to AWS resources, and trusting the auditors' AWS account, the company can ensure that the auditors only have the permissions that are required for their role and nothing more. Assigning a unique external ID to the role's trust policy, it will ensure that only the auditors' AWS account can assume the role.
Reference:
AWS IAM Roles documentation: https://aws.amazon.com/iam/features/roles/ AWS IAM Best practices: https://aws.amazon.com/iam/security-best-practices/
NEW QUESTION # 131
A company has migrated a legacy application to the AWS Cloud. The application runs on three Amazon EC2 instances that are spread across three Availability Zones. One EC2 instance is in each Availability Zone. The EC2 instances are running in three private subnets of the VPC and are set up as targets for an Application Load Balancer (ALB) that is associated with three public subnets.
The application needs to communicate with on-premises systems. Only traffic from IP addresses in the company's IP address range are allowed to access the on-premises systems. The company's security team is bringing only one IP address from its internal IP address range to the cloud. The company has added this IP address to the allow list for the company firewall. The company also has created an Elastic IP address for this IP address.
A solutions architect needs to create a solution that gives the application the ability to communicate with the on-premises systems. The solution also must be able to mitigate failures automatically.
Which solution will meet these requirements?
Answer: B
Explanation:
to connect out from the private subnet you need an NAT gateway and since only one Elastic IP whitelisted on firewall its one NATGateway at time and if AZ failure happens Lambda creates a new NATGATEWAY in a different AZ using the Same Elastic IP ,dont be tempted to select D since application that needs to connect is on a private subnet whose outbound connections use the NATGateway Elastic IP
NEW QUESTION # 132
A company wants to design a disaster recovery (DR) solution for an application that runs in the company's data center. The application writes to an SMB file share and creates a copy on a second file share. Both file shares are in the data center. The application uses two types of files: metadata files and image files.
The company wants to store the copy on AWS. The company needs the ability to use SMB to access the data from either the data center or AWS if a disaster occurs. The copy of the data is rarely accessed but must be available within 5 minutes.
Which solution will meet these requirements MOST cost-effectively?
Answer: D
Explanation:
The correct solution is to use an Amazon S3 File Gateway to store the copy of the SMB file share on AWS. An S3 File Gateway enables on-premises applications to store and access objects in Amazon S3 using the SMB protocol. The S3 File Gateway can also be accessed from AWS using the SMB protocol, which provides the ability to use the data from either the data center or AWS if a disaster occurs. The S3 File Gateway supports tiering of data to different S3 storage classes based on the file type. This allows the company to optimizethe storage costs by using S3 Standard-Infrequent Access (S3 Standard-IA) for the metadata files, which are rarely accessed but must be available within 5 minutes, and S3 Glacier Deep Archive for the image files, which are the lowest-cost storage class and suitable for long-term retention of data that is rarely accessed. This solution is the most cost-effective because it does not require any additional hardware, software, or replication services.
The other solutions are incorrect because they either use more expensive or unnecessary services or components, or they do not meet the requirements. For example:
Solution A is incorrect because it uses AWS Outposts with Amazon S3 storage, which is a very expensive and complex solution for the scenario in the question. AWS Outposts is a service that extends AWS infrastructure, services, APIs, and tools to virtually any data center, co-location space, or on-premises facility. It is designed for customers who need low latency and local data processing. Amazon S3 storage on Outposts provides a subset of S3 features and APIs to store and retrieve data on Outposts. However, this solution does not provide SMB access to the data on Outposts, which requires a Windows EC2 instance on Outposts as a file server. This adds more cost and complexity to the solution, and it does not provide the ability to access the data from AWS if a disaster occurs.
Solution B is incorrect because it uses Amazon FSx File Gateway and Amazon FSx for Windows File Server Multi-AZ file system that uses SSD storage, which are both more expensive and unnecessary services for the scenario in the question. Amazon FSx File Gateway is a service that enables on-premises applications to store and access data in Amazon FSx for Windows File Server using the SMB protocol. Amazon FSx for Windows File Server is a fully managed service that provides native Windows file shares with the compatibility, features, and performance that Windows-based applications rely on. However, this solution does not meet the requirements because it does not provide the ability to use different storage classes for the metadata files and image files, and it does not provide the ability to access the data from AWS if a disaster occurs. Moreover, using a Multi-AZ file system that uses SSD storage is overprovisioned and costly for the scenario in the question, which involves rarely accessed data that must be available within 5 minutes.
Solution D is incorrect because it uses an S3 File Gateway that uses S3 Standard-IA for both the metadata files and image files, which is not the most cost-effective solution for the scenario in the question. S3 Standard-IA is a storage class that offers high durability, availability, and performance for infrequently accessed data. However, it is more expensive than S3 Glacier Deep Archive, which is the lowest-cost storage class and suitable for long-term retention of data that is rarely accessed. Therefore, using S3 Standard-IA for the image files, which are likely to be larger and more numerous than the metadata files, is not optimal for the storage costs.
What is S3 File Gateway?
Using Amazon S3 storage classes with S3 File Gateway
Accessing your file shares from AWS
NEW QUESTION # 133
......
For candidates who are going to buy SAP-C02 Exam Materials online, they may have the concern about the website safety. If you choose us, we will offer you a clean and safe online shopping environment. In addition, SAP-C02 exam dumps are high quality and accuracy, and you can pass your exam just one time. We apply the international recognition third party for the payment, therefore your money safety can also be guaranteed. In order to let you access to the latest information, we offer you free update for 365 days after purchasing, and the update version will be sent to your email automatically.
SAP-C02 Study Guides: https://www.pdfbraindumps.com/SAP-C02_valid-braindumps.html
BONUS!!! Download part of PDFBraindumps SAP-C02 dumps for free: https://drive.google.com/open?id=1wtk9-Xr4thtl2pDPOWOAAfX3KfjHsNGO