P.S. Free 2026 Fortinet FCSS_NST_SE-7.6 dumps are available on Google Drive shared by DumpsKing: https://drive.google.com/open?id=1N7JjCsAMNvnS0sVn9D_PladPLiauHShd
Do you want to pass the FCSS_NST_SE-7.6 exam by the first attempt? Our FCSS_NST_SE-7.6 exam questons can be our best assistant on your way to success. And the pass rate of our FCSS_NST_SE-7.6 study guide is high as 98% to 100%, which also prove our excellent quality. If you study with our FCSS_NST_SE-7.6 praparation guide, they will strengthen your learning skilles, add to your knowledge and will enable you to revise the entire syllabus more than once. And you will pass for sure with our FCSS_NST_SE-7.6 learning quiz.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
>> Latest FCSS_NST_SE-7.6 Study Plan <<
If you are busing with your work or study, and have little time for preparation of your exam, our FCSS_NST_SE-7.6 questions and answers will be your best choice. With experienced experts to compile and verify, FCSS_NST_SE-7.6 exam dumps contain most of the knowledge points for the exam, and you just need to spend about 48 to 72 hours on study, you can pass the exam just one time. In addition, you can try free demo before buying FCSS_NST_SE-7.6 Materials, so that you can have a better understanding of what you are going to buy. You can get downloading link and password within ten minutes after payment, so that you can start your learning right away.
NEW QUESTION # 33
Refer to the exhibit.
If the default settings are m place, what can you conclude about the conserve mode shown in the exhibit?
Answer: C
Explanation:
The exhibit shows:
memory conserve mode: on
memory used: 2706 MB 89% of total RAM
memory used threshold red: 2675 MB 88% of total RAM
memory used + freeable threshold extreme: 2887 MB 95% of total RAM
The study guide states that the default thresholds are:
Extreme = 95%
Red = 88%
Green = 82%
So this FortiGate is in conserve mode because memory usage is 89%, which is above the red threshold (88%), but it has not yet reached the extreme threshold (95%).
The study guide then explains exactly what happens during conserve mode:
"For traffic that requires proxy-based inspection (and if memory usage has not exceeded the extreme threshold):
config system global
set av-failopen [off | pass | one-shot]
...
pass (default): All new sessions pass without inspection"
It also says:
"The av-failopen setting also applies to flow-based antivirus inspection." And the same page adds:
"If memory usage exceeds the extreme threshold, all new sessions that require inspection (flow-based or proxy-based) are blocked." Therefore, with default settings and with memory usage below the extreme threshold, FortiGate is allowing new sessions that require inspection, but bypassing inspection. That matches C.
Why the other options are wrong:
A is wrong because the default behavior is not to block proxy-based inspected sessions; the default is pass, meaning they pass without inspection B is wrong because if memory rises another 6%, it reaches 95%, which is the extreme threshold. At that point, the study guide says all new sessions that require inspection are blocked D is wrong because FortiGate blocks all new inspected sessions only when memory usage exceeds the extreme threshold, and the exhibit shows it is currently at 89%, not 95%
NEW QUESTION # 34
In IKEv2, which exchange establishes the first CHILD_SA?
Answer: A
Explanation:
According to RFC 7296 (IKEv2) and Fortinet's official documentation, the IKE_SA_INIT exchange is responsible for negotiating cryptographic parameters, performing the initial Diffie-Hellman exchange, and implementing the cookie challenge mechanism for DoS protection. When the responder suspects a DoS attack (such as mass requests by the same source), it includes a cookie in the IKE_SA_INIT response. The initiator must return the cookie in its next request to prove that it truly exists at the IP address it claims, thereby mitigating resource exhaustion attacks.
This two-step exchange ensures the responder only allocates resources after successful proof of address, aligning with best security practices. Fortinet documentation confirms that this process occurs strictly in the IKE_SA_INIT phase, not in subsequent IKE_Auth or CHILD_SA exchanges.
References:
RFC 7296: IKEv2, Section 2.6, "Denial of Service Protection"
Fortinet FortiOS VPN Handbook: IKEv2 Exchange Process and DoS Protection Mechanism
NEW QUESTION # 35
Refer to the exhibit.
FortiGate is showing continuous high CPU usage During a maintenance window, the CLI command diagnose sys top displays the output shown in the exhibit. The CLI command diagnose twat application ipsmonitor 5 was run. but the CPU usage by daemon ipsengine did not drop Which immediate action can you take to reduce the CPU usage effectively?
Answer: A
Explanation:
To solve this high CPU usage scenario involving the ipsengine, we must understand the specific functions of the diagnose test application ipsmonitor commands shown in the troubleshooting steps.
Analyze the Situation:
Exhibit: The diagnose sys top output shows the ipsengine process is in a run state (R) consuming 99% CPU.
Previous Action: The administrator already ran diagnose test application ipsmonitor 5.
Result: The CPU usage did not drop.
Understand the Commands:
diagnose test application ipsmonitor 5: This command toggles IPS Bypass Mode. When enabled, the IPS engine lets traffic pass through without inspection.
Implication: If the CPU was high due to traffic volume, enabling bypass would drop the CPU load immediately.
Failure: Since the CPU remained at 99% after bypass, the ipsengine process is likely frozen, stuck, or in an internal infinite loop unrelated to the current traffic flow. The process itself is the problem, not the traffic volume.
Evaluate the Solution (Option B):
diagnose test application ipsmonitor 2: This command toggles the IPS engine's Enable/Disable status.
Because the engine is stuck (bypass failed to relieve pressure), the "Immediate action" required is to stop or restart the process entirely.
Running option 2 effectively disables/kills the stuck IPS engine instance, which will immediately drop the CPU usage to near zero. (It can then be toggled again to restart it).
Why other options are incorrect:
A (Reduce signatures): This is a tuning measure for normal operation, not an immediate fix for a stuck process at 99% CPU.
C (Disable IPS on policies): This is a configuration change that takes time and requires a commit; it is not the most immediate diagnostic tool available.
D (Bypass all IPS engines): This describes the action of command 5 (Bypass), which the prompt explicitly states was already performed and failed.
Reference:
FortiGate Security 7.6 Study Guide (IPS & Diagnostics): "Troubleshooting IPS high CPU: 1. Check top. 2.
Try bypass (ipsmonitor 5). 3. If CPU persists, restart the engine (ipsmonitor 99 or 2)."
NEW QUESTION # 36
Refer to the exhibit, which shows the output of the command get router info ospf neighbor.
To what extent does FortiGate operate when looking at its OSPF neighbors? (Choose two.)
Answer: B,C
Explanation:
The command on this slide shows a summary of the statuses of all the OSPF neighbors. For each neighbor, it displays the adjacency state and if it is a DR, a BDR, or neither (DROther) Pagina 362 Enterprise_Firewall_7.
2_Study. - Point-to-point networks contain only two peers, one at each end of a point-to-point link - Broadcast networks (multi-access) support more than two attached routers. They also support sending messages to multiple recipients (broadcasting). Pagina 365 Enterprise_Firewall_7.2_Study. In any multi-access network there is one DR and one BDR. Pagina 439 Network_Security_Support_Engineer_7.4_Study FULL/- This represents a point-to-point network
NEW QUESTION # 37
Refer to the exhibits.
An administrator is attempting to advertise the network configured on port3. However, FGT-A is not receiving the prefix.
Which two actions can the administrator take to fix this problem? (Choose two.)
Answer: A,C
NEW QUESTION # 38
......
There may be some other study materials with higher profile and lower price than our products, but we can assure you that the passing rate of our FCSS_NST_SE-7.6 learning materials is much higher than theirs. And this is the most important. According to previous data, 98 % to 99 % of the people who use our FCSS_NST_SE-7.6 Training Questions passed the exam successfully. If you are willing to give us a trust on our FCSS_NST_SE-7.6 exam questions, we will give you a success.
FCSS_NST_SE-7.6 Reliable Test Experience: https://www.dumpsking.com/FCSS_NST_SE-7.6-testking-dumps.html
DOWNLOAD the newest DumpsKing FCSS_NST_SE-7.6 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1N7JjCsAMNvnS0sVn9D_PladPLiauHShd