As a market leader, our company is able to attract quality staffs, it actively seeks out those who are energetic, persistent, and professional to various 4A0-D03 certificate and good communicator. And we strongly believe that the key of our company's success is its people, skills, knowledge and experience. Over 50% of the account executives and directors have been with the Group for more than ten years. The successful selection, development and 4A0-D03 training of personnel are critical to our company's ability to provide a high pass rate of 4A0-D03 exam questions for you to pass the 4A0-D03 exam.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Layer 3 EVPN Services | 25% | - EVPN Route Type 5 - Symmetric and asymmetric routing - VRF integration and route targets |
| Topic 2: Layer 2 EVPN Services | 25% | - EVPN Route Types 1–4 - Anycast Gateway and IRB - Multi-homing and Ethernet Segments |
| Topic 3: Data Center Interconnect (DCI) Solutions | 25% | - Gateway-less EVPN DCI - BGP route policies and route reflectors - Interoperability with Nokia 7750 SR |
| Topic 4: SR Linux and EVPN Fundamentals | 25% | - SR Linux architecture and CLI - EVPN control plane and MP-BGP - VXLAN encapsulation and underlay |
Now passing Nokia certification 4A0-D03 exam is not easy, so choosing a good training tool is a guarantee of success. GuideTorrent will be the first time to provide you with exam information and exam practice questions and answers to let you be fully prepared to ensure 100% to pass Nokia Certification 4A0-D03 Exam. GuideTorrent can not only allow you for the first time to participate in the Nokia certification 4A0-D03 exam to pass it successfully, but also help you save a lot of valuable time.
NEW QUESTION # 36
Consider the exhibit.
All IP-VRFs are configured properly and are operational.
Which of the following statements is FALSE?
Answer: B
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From [SR Linux EVPN and Data Center Interconnect/Course Guide/topics]:
The scenario describes Layer 3 EVPN multi-homing with an IP-VRF service and an external CE VNF advertising the 40.40.40.0/24 prefix through BGP. A DF election can occur among the leaf routers participating in the Ethernet Segment, and the active/primary forwarding node is used for the relevant service behavior. The AD per EVI route can participate in identifying service-level reachability for the Ethernet Segment, and the prefix traffic follows the valid advertised path toward the CE VNF. Because Leaf3 has the BGP connection to the CE VNF, traffic for 40.40.40.0/24 is forwarded through Leaf3. Option B is false because it incorrectly states that all connected leaf routers will use single-active redundancy. The exhibit and answer context indicate a more specific forwarding/primary selection for the service, not a blanket statement that every connected leaf operates using single-active redundancy. In L3 multi-homing, redundancy behavior depends on the ES mode, prefix advertisement, next-hop association, and CE connectivity. The forwarding decision for the customer prefix is tied to the active/valid route advertisement, not to every leaf uniformly acting as single-active. Reference: L3 EVPN multi-homing, DF election, AD per EVI role, PE-CE BGP prefix forwarding.
NEW QUESTION # 37
Consider the exhibit.
Which of the following statements about the configuration and operation of this setup is FALSE?
Answer: C
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From [SR Linux EVPN and Data Center Interconnect/Course Guide/topics]:
This setup represents single-active Layer 2 EVPN multi-homing. In single-active mode, the Ethernet Segment is configured so that only one PE acts as the active forwarding node for a given service, while the other remains standby. The ports connecting to the host are associated with ES-1 so the EVPN control plane can perform Ethernet Segment discovery, DF election, and standby behavior. If Leaf1 is the active/DF node for the service, all traffic to and from the host flows through Leaf1 until a failure or DF transition occurs. Option D is false because a host LAG is not required for this single-active topology. A LAG is typically required for all-active L2 multi-homing, where the host must treat multiple physical links toward different leaf routers as one logical bundle. In single-active operation, the host can be connected through separate physical links or active/standby access behavior without requiring LACP bundling. The EVPN PEs enforce the active path selection through DF and ES state rather than relying on host-side LAG hashing. Reference: single-active EVPN multi-homing, Ethernet Segment port association, DF-controlled active forwarding.
NEW QUESTION # 38
Consider the exhibit.
All three of the leafs have a MP-BGP EVPN session to the route-reflector Spine-1. Leaf-1, Leaf-2 and Leaf-3 have existing instances of an L2 EVPN named MAC VRF-1. Host-1 has just sent its first Ethernet frame into MAC VRF-1 on Leaf-1.
Which of the following steps is FALSE?
Answer: D
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From [SR Linux EVPN and Data Center Interconnect/Course Guide/topics]:
When Host-1 sends its first Ethernet frame into MAC VRF-1, Leaf-1 performs normal local data-plane MAC learning on the access interface and installs Host-1's MAC address into the MAC forwarding table. In an L2 EVPN MAC-VRF, host MAC reachability is then advertised into the EVPN control plane using EVPN route type 2, the MAC/IP Advertisement route. Route type 5 is not used for host MAC advertisement; RT-5 is used for IP prefix advertisement in Layer 3 EVPN services. Therefore, option B is false because it incorrectly states that Leaf-1 generates an EVPN RT-5 update with the host MAC address. In this topology, Leaf-1 sends the correct EVPN update to the route reflector, Spine-1. The route reflector then reflects the update to Leaf-2 and Leaf-3, and those remote leaves import the route if the route target matches their MAC VRF-1 import policy. The route target controls service membership, ensuring that only PEs participating in the same EVPN instance import the MAC route. Reference: L2 EVPN MAC learning, RT-2 MAC/IP advertisement, route-reflector distribution, route-target import.
NEW QUESTION # 39
Which of the following EVPN route-types is used to implement aliasing?
Answer: C
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From [SR Linux EVPN and Data Center Interconnect/Course Guide/topics]:
Aliasing is an EVPN multi-homing mechanism that allows remote PEs to send traffic to any eligible PE attached to the same Ethernet Segment, even if a specific MAC address was learned and advertised by only one of those PEs. This avoids a traffic bottleneck and enables load-sharing in all-active multi-homing designs. The route type used to implement this behavior is the Ethernet Auto-Discovery per EVI route, commonly referred to as AD per EVI. This route tells remote PEs that a given PE has reachability to a specific Ethernet Segment for a specific EVPN instance. When remote PEs receive these advertisements from multiple PEs for the same ESI and EVI, they can treat those PEs as valid next-hops for traffic toward that Ethernet Segment. Ethernet Segment routes support ES discovery and DF election, while IP/MAC routes advertise host MAC and optionally IP binding information. AD per ES routes are used for broader Ethernet Segment-level procedures, but aliasing at the service level relies on AD per EVI reachability. Reference: EVPN route type 1, AD per EVI, aliasing in all-active multi-homing.
NEW QUESTION # 40
Which of the following statements about the configuration of a Layer 3 multi-homing with a centralized router is FALSE?
Answer: C
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From [SR Linux EVPN and Data Center Interconnect/Course Guide/topics]:
Layer 3 EVPN multi-homing with a centralized router uses an Ethernet Segment to associate multiple leaf routers with a common external L3 attachment. The centralized router is part of that attached segment from the forwarding perspective, and the connected leaf routers advertise third-party or customer prefixes into EVPN so that remote leaves can reach those prefixes through the multi-homed attachment. For L3 EVPN, learned customer prefixes are normally advertised using EVPN route type 5, which carries IP prefix reachability. In an all-active design, remote leaf routers may load balance traffic to the customer prefix through multiple attached leaf routers because the ES next-hop allows the remote PE to understand that the prefix is reachable through a multi-homed Ethernet Segment. The false statement is that every router participating in the Ethernet Segment must be configured with all-active mode. Multi-homing mode is a design and configuration property of the EVPN PEs participating in the ES, and designs may use single-active or all-active behavior depending on redundancy and forwarding requirements. Reference: L3 EVPN multi-homing, centralized router attachment, EVPN RT-5 prefix advertisement.
NEW QUESTION # 41
......
GuideTorrent 4A0-D03 valid test will assist you to pass your 4A0-D03 actual test with ease. You will never regret to choose our 4A0-D03 exam engine test. Here are some outstanding properties which can benefit all of you. The detailed explanations are offered where available to ensure you fully understand why to choose the correct answers. All the questions cover the main points which the 4A0-D03 Actual Exam required. The answers of each question are correct and verified by our IT experts which can ensure you 100% pass.
Valid 4A0-D03 Dumps Demo: https://www.guidetorrent.com/4A0-D03-pdf-free-download.html