P.S. Free & New NSE4_FGT_AD-7.6 dumps are available on Google Drive shared by It-Tests: https://drive.google.com/open?id=1vE1mG4h6-K_mXZfYmiBs0H1oc_o0HcEv
Up to now, we have more than tens of thousands of customers around the world supporting our NSE4_FGT_AD-7.6 training prep. So our NSE4_FGT_AD-7.6 study materials are elemental materials you cannot miss. In your review duration, you can contact with our after-sales section if there are any problems with our NSE4_FGT_AD-7.6 Practice Braindumps. They will help you 24/7 all the time. These services assure your avoid any loss.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
>> Fortinet NSE4_FGT_AD-7.6 Original Questions <<
The users can instantly access the product after purchasing it from It-Tests NSE4_FGT_AD-7.6, so they don't have to wait to prepare for the Fortinet NSE4_FGT_AD-7.6 Exams. The 24/7 support system is available for the customers, so they can contact the support whenever they face any issue, and it will provide them with the solution. Furthermore, It-Tests offers up to 1 year of free updates and free demos of the product.
NEW QUESTION # 11
Refer to the exhibits.
The system performance output and default configuration of high memory usage thresholds on a FortiGate device are shown.
Based on the system performance output, what are the two possible outcomes? (Choose two.)
Answer: C,D
Explanation:
From the exhibits:
System performance output
Memory used: 90%
Free memory: ~5%
Default memory thresholds (FortiOS 7.6)
memory-use-threshold-green 82%
memory-use-threshold-red 88%
memory-use-threshold-extreme 89%
Because memory usage (90%) exceeds the extreme threshold (89%), the FortiGate enters conserve mode.
Effects of conserve mode (FortiOS 7.6 - verified)
B . FortiGate has entered conserve mode.
Correct
When memory usage exceeds the red/extreme threshold, FortiGate automatically enters conserve mode.
This is exactly the condition shown in the system performance output.
D . Administrators can change the configuration.
Correct
Even in conserve mode:
Administrators can still log in (GUI, SSH, console)
Configuration changes are allowed
FortiGate does not lock configuration access during conserve mode.
This behavior is explicitly documented in the FortiOS 7.6 Conserve Mode section.
Why the other options are incorrect
A . Administrators can access FortiGate only through the console port.
Incorrect
Network access (GUI/SSH) is still available in conserve mode unless otherwise restricted.
Console-only access is not a conserve-mode requirement.
C . FortiGate drops new sessions.
Incorrect (as a general statement)
FortiGate may drop or bypass new inspection-required sessions depending on fail-open/fail-close settings.
It does not universally drop all new sessions, so this statement is not always true.
NEW QUESTION # 12
FortiGate is integrated with FortiAnalyzer and FortiManager.
When creating a firewall policy, which attribute must an administrator include to enhance functionality and enable log recording on FortiAnalyzer and FortiManager?
Answer: D
Explanation:
FortiGate uses a Universally Unique Identifier (UUID) for each firewall policy. This UUID is synchronized with FortiAnalyzer and FortiManager, allowing them to reliably identify the policy even if the policy ID or sequence changes. This ensures consistent log recording and enhanced functionality across integrated devices.
NEW QUESTION # 13
There are multiple dialup IPsec VPNs configured in aggressive mode on the HQ FortiGate. The requirement is to connect dial-up users to their respective department VPN tunnels.
Which phase 1 setting you can configure to match the user to the tunnel?
Answer: C
Explanation:
In FortiOS 7.6, when multiple dialup IPsec VPNs are configured on the same FortiGate-especially in Aggressive Mode-FortiGate must identify which Phase 1 configuration a connecting client should match.
How FortiGate selects a dialup IPsec tunnel
For dialup VPNs:
The remote peer (user or device) does not have a fixed IP address
Multiple Phase 1 interfaces may exist on the HQ FortiGate
FortiGate uses identifying information sent during IKE Phase 1 to select the correct tunnel Aggressive Mode behavior Aggressive mode sends ID information in clear text during Phase 1 This allows FortiGate to match incoming peers to the correct Phase 1 configuration Why Peer ID is the correct answer C). Peer ID Peer ID (also called IKE ID) is used to:
Identify the remote peer
Differentiate between multiple dialup tunnels
Common Peer ID formats:
FQDN
User FQDN
Key ID
FortiGate matches the received Peer ID against the Phase 1 configuration to select the correct tunnel This is the documented and recommended method for:
Mapping users to different department tunnels
Supporting multiple dialup IPsec VPNs in aggressive mode
Why the other options are incorrect
A). Local GatewayIdentifies the local FortiGate interface/IP, not the remote user.
B). Dead Peer DetectionUsed only for tunnel health monitoring, not tunnel selection.
D). IKE Mode ConfigUsed for assigning IP addresses and pushing settings, not for selecting the Phase 1 tunnel.
NEW QUESTION # 14
Refer to the exhibits.
You are asked to implement an antivirus profile for files downloaded through FTP, HTTP, and HTTPS.
While testing, you are successful with HTTP and FTP protocols, but FortiGate does not block the file download over HTTPS.
What could be the cause?
Answer: C
Explanation:
The SSL inspection mode in the firewall policy is set to certificate-inspection, which only examines SSL certificates without decrypting HTTPS traffic. Because of this, FortiGate cannot inspect or block files downloaded over HTTPS, as the content remains encrypted. To enable antivirus scanning on HTTPS traffic, the SSL inspection mode must be set to deep-inspection, allowing the FortiGate to decrypt, inspect, and re-encrypt the traffic.
NEW QUESTION # 15
Refer to the exhibit. Why is the Antivirus scan switch grayed out when you are creating a new antivirus profile for FTP?
Answer: C
Explanation:
Enable one or more protocols for inspection, then enable AntiVirus scan for the selected protocols with a specified action.
https://docs.fortinet.com/document/fortigate/7.6.4/administration-guide/922096/inspection-mode- feature-comparison
NEW QUESTION # 16
......
Among all marketers who actively compete to win customers, we sincerely offer help for exam candidates like you with our NSE4_FGT_AD-7.6 exam questions. To cater to the needs of exam candidates, our experts have been assiduously worked for their quality day and night. NSE4_FGT_AD-7.6 Training Materials can help you achieve personal goals about the NSE4_FGT_AD-7.6 exam successfully. So of course we received sincere feed-backs from exam candidates which are maximum benefits for us.
NSE4_FGT_AD-7.6 Instant Discount: https://www.it-tests.com/NSE4_FGT_AD-7.6.html
DOWNLOAD the newest It-Tests NSE4_FGT_AD-7.6 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1vE1mG4h6-K_mXZfYmiBs0H1oc_o0HcEv