BTW, DOWNLOAD part of SurePassExams 300-110 dumps from Cloud Storage: https://drive.google.com/open?id=1bOb1apa8zTjgyfsCkKbRJTSXGMMCf_bF
To keep with the fast-pace social life, we make commitment to all of our customers that we provide the fastest delivery services on our 300-110 study guide for your time consideration. As most of the people tend to use express delivery to save time, our 300-110 Preparation exam will be sent out within 5-10 minutes after purchasing. As long as you pay at our platform, we will deliver the relevant 300-110 exam materials to your mailbox within the given time.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Mobility | 25% | - Site Tags - Optimize client roaming - Design mobility groups - Validate mobility tunneling |
| Topic 2: Wired and Wireless Infrastructure | 30% | - Design high-density wireless networks - Design wireless bridging (mesh) - Physical infrastructure requirements - Design for data, voice, video, location - Logical infrastructure requirements - Design radio management |
| Topic 3: WLAN High Availability | 20% | - Design AP high availability - Design controller high availability |
| Topic 4: Wireless Site Survey | 25% | - Predictive site survey - Layer 1 site survey analysis - Collect design requirements and evaluate constraints - Pre-deployment site survey - Post-deployment site survey - Material attenuation and its design effects - Planning tools and network metrics evaluation |
>> Cisco 300-110 Reliable Exam Pass4sure <<
As a market leader, our company is able to attract quality staffs on our 300-110 exam materials , it actively seeks out those who are energetic, persistent, and professional to various 300-110 certificate and good communicator. And we believe that the key of our company's success is its people, skills, and experience on 300-110 Study Guide. Over 50% of the account executives and directors have been with the Group for more than ten years. We have strong strenght to lead you to success!
NEW QUESTION # 42
A customer has two Cisco 5520 WLCs that manage all APs throughout the network. The WLCs are in different locations to provide geographical redundancy. A mobility group has been configured on both WLCs and has an UP status on both controllers. The APs in location A are statically configured to use controller A as the primary and controller B as the secondary. If the WLC in location A goes offline, the APs successfully join the WLC in location B, but they do not fail over to their primary configured controller when it recovers.
Which configuration task fixes the issue?
Answer: C
Explanation:
Enabling AP fallback globally on the WLC allows access points to reconnect to their primary controller after they have connected to a secondary controller due to the primary being offline. This is the exact behavior described in the scenario - APs successfully fail over to the secondary WLC but do not return to the primary WLC when it recovers. AP Fallback is a WLC-level setting that monitors the availability of each AP ' s configured primary controller and initiates a reconnection when the primary becomes reachable again.
Without AP Fallback enabled, APs remain on whatever controller they most recently joined - in this case, the secondary - even after the primary recovers. The CAPWAP AP Controller IP Address command (Option A) permanently changes the primary controller configuration on the AP, which is not the intended solution - the AP already has the correct primary configured. DHCP Option 43 (Option B) is used for initial AP discovery, not fallback. AP Failover Priority (Option D) controls which APs are processed first during a failover event, not whether APs return to their primary controller. Reference: WLSD Study Guide - AP Fallback Configuration, N+1 Redundancy Recovery, Controller Primary/Secondary Hierarchy.
NEW QUESTION # 43
A customer has 10 access point licenses available on their backup Cisco WLC and their primary Cisco WLC is at full capacity. 5 access points are set to high failover priority and 7 access points are set to critical failover priority. During a failure, not all critical access points failed over to the backup Cisco WLC. Which configuration is the cause of this issue?
Answer: D
Explanation:
The issue described indicates that there are more critical priority access points than the backup Cisco WLC can accommodate with its available AP licenses. The backup WLC has only 10 licenses available, but 7 APs are set to critical failover priority and 5 to high failover priority -- a total of 12 APs attempting to join. Even though critical priority APs are processed before high priority APs, the backup WLC can only accept 10 APs total (its license limit). Since there are 7 critical priority APs and only 10 total licenses, all 7 critical APs will fail over successfully -- but if the scenario involves additional critical APs beyond the license limit, the excess will not be able to join. The oversubscription of the critical priority AP count relative to available backup WLC capacity is the root cause.
NEW QUESTION # 44
A school deploys a Cisco wireless infrastructure in its classrooms to support a high density of mobile devices.
The network administrator wants to bond channels in groups of two and only allow APs to send 802.11 management frames at 24 Mbps. What should be included in the design to accomplish this objective?
Answer: A
Explanation:
For a high-density classroom deployment using 5 GHz with channel bonding in groups of two (40 MHz channels), the correct configuration is to set the channel width for 802.11a (5 GHz) to 40 MHz and set the 24 Mbps data rate to Mandatory. Channel bonding refers to combining two adjacent 20 MHz channels into a single 40 MHz channel, doubling the channel width. Since the requirement specifies 5 GHz operation (where high-density design is appropriate), this must be applied to the 802.11a radio profile, not 802.11b (which operates only on 2.4 GHz). Setting 24 Mbps as Mandatory ensures that APs transmit management frames (beacons, probe responses, and other control frames) only at 24 Mbps - this is how the ' only allow APs to send 802.11 management frames at 24 Mbps ' requirement is implemented. Setting it as Supported (Options B and D) would allow the AP to use lower rates for management frames. Options A and D incorrectly target
802.11b, which does not support 40 MHz channels. Reference: WLSD Study Guide - High-Density WLAN Design, 802.11a Channel Configuration, Data Rate and Channel Width Settings.
NEW QUESTION # 45
A customer is planning to replace older access points with Cisco 4800 Series Access Points. Unaware of the infrastructure requirements, the client has an engineer investigate the inline power requirement. Which IEEE
802.3 standard complies with the Cisco 4800 Series Access Points?
Answer: B
Explanation:
The Cisco Aironet 4800 Series Access Point is a tri-radio, high-performance access point designed for high- density environments. It draws significantly more power than older dual-radio APs and requires IEEE 802.3bt (also known as PoE++), which provides up to 90W per port at the Power Sourcing Equipment. IEEE 802.3af (Type 1 PoE) delivers only 15.4W and 802.3at (Type 2 PoE+) provides up to 30W - both are insufficient for full functionality of the 4800 series, which has a dedicated third scanning radio that requires the additional power budget provided by 802.3bt. IEEE 802.3ac is a standard related to VLAN tagging and is entirely unrelated to Power over Ethernet. Engineers designing wired infrastructure for Cisco 4800 deployments must ensure switches support 802.3bt Type 3 or Type 4 to guarantee full AP functionality across all three radios simultaneously. Reference: WLSD Study Guide - Wired Infrastructure Design, PoE Standards and Power Budget Planning, Cisco 4800 Series AP Specifications.
NEW QUESTION # 46
A wireless network consists of two IOS XE controllers installed in a data center, 9100 series APs, and a corporate and a guest WLAN. The customer must have a high availability pair of two Cisco WLCs for the client SSO. Which two design approaches must the engineer take to meet the requirement? (Choose two.)
Answer: A,C
Explanation:
Configuring a high availability SSO pair on Cisco Catalyst 9800 IOS XE WLCs has specific technical prerequisites that must be satisfied for the SSO relationship to form and function correctly. The two critical requirements are: each WLC must have a unique Redundancy Management Interface (RMI) IP address (Option B), and both WLCs must run identical IOS XE software versions (Option D). The Redundancy Management Interface is the dedicated in-band control channel over which the active and standby WLCs exchange state synchronization information, keepalive messages, and configuration updates. Each controller requires its own unique RMI IP address within the same subnet - the active uses one address and the standby uses another. If they shared the same RMI IP (Option C), there would be an IP address conflict preventing the interface from functioning. Identical software versions (Option D) are mandatory because the SSO state synchronization protocol and data structures must be version-compatible between the active and standby controllers. Any mismatch in IOS XE version will prevent SSO formation. License count (Option A) does not need to be identical for SSO. Service port IP addresses (Option E) must be unique per controller, not identical.
Reference: WLSD Study Guide - Catalyst 9800 SSO Prerequisites, Redundancy Management Interface Configuration, High Availability Pair Formation Requirements.
NEW QUESTION # 47
......
A certificate may be a threshold for many corporations, it can decide that if you can enter a good company. There are 300-110 test dumps in our company with high quality, if you choose us pass guarantee and money back guarantee, if you indeed fail the exam, your money will be returned to your account. You can take easy to use the 300-110 Test Dumps, since we have the first-hand information, we will ensure that you will get the latestet information.
Latest 300-110 Study Materials: https://www.surepassexams.com/300-110-exam-bootcamp.html
BONUS!!! Download part of SurePassExams 300-110 dumps for free: https://drive.google.com/open?id=1bOb1apa8zTjgyfsCkKbRJTSXGMMCf_bF