P.S. Free & New MB-240 dumps are available on Google Drive shared by CramPDF: https://drive.google.com/open?id=1FAmmH474zVR01-vpZDCy8SjFkBfWdGvx
In order to serve you better, we have offline and online chat service stuff, and any questions about MB-240 training materials, you can consult us directly or you can send your questions to us by email. In addition, MB-240 exam dumps of us will offer you free domo, and you can have a try before purchasing. Free demo will help you to have a deeper understanding of what you are going to buy. If you have any question about the MB-240 Training Materials of us, you can just contact us.
| Section | Weight | Objectives |
|---|---|---|
| Schedule and Dispatch Work | 20% | - Resource scheduling
|
| Field Service Mobile and Customer Experience | 20% | - Mobile app configuration
|
| Manage Inventory and Assets | 15% | - Inventory management
|
| Configure Dynamics 365 Field Service | 20% | - Configure Field Service settings
|
| Work Order Management | 25% | - Manage work orders lifecycle
|
As is known to us, if there are many people who are plugged into the internet, it will lead to unstable state of the whole network, and you will not use your study materials in your lunch time. If you choice our MB-240 exam question as your study tool, you will not meet the problem. Because the app of our MB-240 Exam Prep supports practice offline in anytime. If you buy our products, you can also continue your study when you are in an offline state. You will not be affected by the unable state of the whole network. You can choose to use our MB-240 exam prep in anytime and anywhere.
NEW QUESTION # 63
You are implementing Connected Field Service.
You need to provide a list of loT components that can be used within Connected Field Service. Which three loT components are applicable? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.
Answer: C,D,E
NEW QUESTION # 64
You are a Microsoft Dynamics 365 Field Service dispatcher.
You need to implement a capability within the schedule board to allow you to find resources for a work order.
The work order can be done by any resource with the right piece of equipment, who is available at 9:00 A.M.
during a selected week.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
NEW QUESTION # 65
Case Study 3 - Contoso Compressor Ltd
Company Overview. Company Structure
Contoso Compressor Ltd. is a large global manufacturer with 12,000 employees. Contoso Compressor produces, installs, and services large B2B and small B2C gas and air compressors.
They have manufacturing plants and service centers in:
North America (Canada, US, Mexico) Territories
- US - 600 Service Technicians, 60 Call Center Agents, 30 Dispatchers
- Canada - 300 Service Technicians, 30 Call Center Agents, 15 Dispatchers
- Mexico - 200 Service Technicians, 20 Call Center Agents, 10 Dispatchers Europe Territories
- Germany - 200 Service Technicians, 20 Call Center Agents, 10 Dispatchers
- France - 150 Service Technicians, 15 Call Center Agents, 7 Dispatchers
- Italy - 100 Service Technicians, 10 Call Center Agents, 5 Dispatchers South America Territories
- Brazil - 200 Service Technicians, 20 Call Center Agents, 10 Dispatchers
- Argentina - 100 Service Technicians, 10 Call Center Agents, 5 Dispatchers India Territories
- Mumbai - 100 Service Technicians, 10 Call Center Agents, 5 Dispatchers
- Chennai - 150 Service Technicians, 15 Call Center Agents, 7 Dispatchers Contoso Contoso Compressor sales channels include direct and via distributors.
Contoso Compressor service and installation channels include direct and via service partners.
Company Overview. Existing Systems
Existing systems:
- SAP for ERP
- Siebel for Sales and Customer Service
- Home grown for Field Service and Installations
Dynamics 365 has been selected for Sales, Customer Service, and Field Service.
Azure IoT and Azure Machine Learning have been selected for Connected Field Service.
Sales and Service Overview. B2B Sales and Service Overview
Sales
- 70% of total Sales & Service Revenue
- 20% new sales revenue is through distributors
Installations
- Variety of large compressors
- Scheduled with Dispatch when equipment has been shipped
- Take a crew of 2-3 technicians
Service
- 95% of service calls handled by Contoso Call Center
- All calls come to a regional service center
- Break Fix
- Planned/Preventive Maintenance
- Both Break Fix and Planned/Preventive Maintenance Work Orders require 1 technician
- Planned/Preventive Maintenance
- Requires a detailed Inspection prior to restart of equipment
Sales and Service Overview. B2C Sales and Service Overview
Sales
- 30% of total Sales & Service Revenue
- 100% of new Sales revenue from distributors
No Installation
Service
- 95% of all service issues handled by partners/distributors
- Service calls to Contoso Call Center are routed to a partner/distributor for service
- Only 1% of all Service Revenue
Sales and Service Overview. Business Goals
Contoso Compressor desires to double both their Sales and Service Revenue over the next 5 years.
To achieve this, they have developed the following goals as part of implementing a new CRM Sales, Service, and Field Service application:
1. New Acquisitions
2. Partner/Distribution network expansion for B2B and B2C
3. New B2B Service Offerings
4. Increase Customer Satisfaction/NPS
Current Challenges. Call Center
- Siloed systems
- Disconnected from other regions
- Poor Return tracking
- Poor partner visibility
Current Challenges. Work Order Management
- No visibility to truck stock
- No task breakdown on Work Orders
- Poor reconciliation to partners/distributors
Current Challenges. Resource Management
- No crew capability for installs
- No visibility across regions
Current Challenges. Contract/Agreement Management
- Service is often given away due to poor entitlement tracking
- No tickler system for renewals
Current Challenges. Asset Management
- No sub-asset tracking
- No work Order history
- No visibility to detailed location tracking
- No ability to connect to IoT
Current Challenges. Mobile Technician Capability
- No offline mode
- Inspections are done manually
- No quoting, signature, or job summary/print capability
Current Challenges. Scheduling
- Lack of status updates from technicians
- Manual crew scheduling for installs
- No ability to estimate travel time
- No filter capability to search for the best technician
Desired Functionality. Call Center
- Customer 360 capability with Knowledge Base
- Visibility to Partner/Distributor information
- Portal capability for customer visibility to Knowledge, equipment owned, open work orders and cases Desired Functionality. Work Order management
- Defined Work Order Tasks
- Inventory tracking
- Digital Inspections with Branch Logic and Reporting
- Integration to ERP for proper pricing and invoicing
Desired Functionality. Inspections
- Conditional logic for Gas Compressor pressure reading failure
- By looking at the reading, a technician can see if it's in the red, indicating failure. If fail, must shut down, clean or replace pressure valve
- Impromptu Inspections - the ability to create inspections at a customer site on assets without a work order while working on another work order at the customer site.
- Inspection results are critical to review with the customer after the inspection is performed Desired Functionality. Resource Management
- Flexible Work Hours
- Crews, equipment tracking as resources for scheduling
- Skills with proficiency levels
- Drip Scheduling for planned maintenance jobs
Desired Functionality. Asset Management
- Track Asset sub-components
- Connected Service for new equipment
- Azure Machine Learning to offer a new chargeable service for machine uptime
- Capture defined asset readings to feed the Azure Machine Learning model
- Many internal assets are used on jobs. We need to be able to schedule those assets with a technician on a job.
- We also perform our own maintenance on internal assets
- These would not be needed for RS
Desired Functionality. Contract/Agreement Management
- Generate Planned Maintenance jobs 3 months in advance for capacity planning
- Tickler system to notify customers of expirations
- Track covered equipment and related entitlements
Desired Functionality. Mobile Technician Capability
- Offline
- Digitized Inspections
- Geo-fencing for no-touch arrival and departure
- "Uber-like" functionality, notifying customers when a technician will be arriving
- Remote Assist functionality to quickly get junior technicians in the field and increasing first time fix rate Desired Functionality. Scheduling
- Schedule Boards visible to each region
- Assign resources based on skills and proficiency
- Visibility to access resources from other regions
- Drip Scheduling for inspection jobs
- Scheduling optimization for small jobs
- Automated crew assignment for installation jobs
Desired Functionality. Returns Management
- RMA's
- Tied to Customer Service
- Track open Returns to reduce part/asset leakage & charge for not returned items
- The biggest issue we face today is that we can't track an item that a customer has returned
- RTV
- Ability to send in-warranty parts back to vendor for credit or exchange Desired Functionality. IoT
- IoT devices will be place on all new and existing equipment.
- Devices will measure compressor temperature and motor pressure of the equipment.
- Azure Machine Learning is desired to predict failure based on trends of compressor temperature and pressure readings.
- Currently, there is no way to capture backflow pressure because it can only be measured during the onsite inspection by a technician.
- Contoso Compressor would like to capture that value and feed it back to the machine-learning algorithm to better measure performance and predict failure.
You are the lead consultant on a Dynamics 365 Field Service implementation for Contoso Compressor.
Which two things must the technician do to set up the system frequency results and meet Contoso's requirements from the Case Study? Each correct answer presents part of the solution.
Answer: A,E
NEW QUESTION # 66
Drag and Drop Question
You are a new Dynamics 365 for Field Service Administrator for a manufacturing firm.
Your manager has asked you to configure the system to enable scheduling for maintenance of equipment at customer sites. It is against company policy to dispatch resources to sites with known issues such as credit or safety holds. Many site visits may require more than one technician to be sent for the repair.
Which resource scheduling component should be used for each task? To answer, drag the appropriate resource scheduling component to the appropriate task. Each resource scheduling component may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view the content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 67
You are entering products and services into Dynamics 365 CE Field Services.
You need to ensure that your field technicians can use the products when completing work orders.
Which two field service product types should you configure to allow your technicians to add work order products? Each correct answer presents a complete solution.
Answer: A,B
Explanation:
https://docs.microsoft.com/en-us/dynamics365/customer-engagement/field-service/create- product-or-service
NEW QUESTION # 68
......
Did you often feel helpless and confused during the preparation of the MB-240 exam? Do you want to find an expert to help but feel bad about the expensive tutoring costs? Don't worry. Our MB-240 exam questions can help you to solve all the problems. Our MB-240 Study Material always regards helping students to pass the exam as it is own mission. And we have successfully helped numerous of the candidates pass their exams.
MB-240 Test Braindumps: https://www.crampdf.com/MB-240-exam-prep-dumps.html
DOWNLOAD the newest CramPDF MB-240 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1FAmmH474zVR01-vpZDCy8SjFkBfWdGvx