2026 Latest GuideTorrent 350-101 PDF Dumps and 350-101 Exam Engine Free Share: https://drive.google.com/open?id=1EaDvTcKOGHEwztqSZPk3CEFd01-7fNYS
You can finish practicing all the contents in our Cisco 350-101 practice materials within 20 to 30 hours, and you will be confident enough to attend the exam for our Implementing and Operating Cisco Wireless Core Technologies 350-101 exam dumps are exact compiled with the questions and answers of the real exam. During the whole year after purchasing, you will get the latest version of our 350-101 Study Materials for free.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
>> 350-101 Best Study Material <<
You will feel comfortable and pleasant to shop on such a good website. All the contents of our 350-101 training dumps are organized logically. Each small part contains a specific module. You can clearly get all the information about our 350-101 study guide. If you cannot find what you want to know, you can have a conversation with our online workers. Your questions on 350-101 Exam Dumps will be answered accurately and quickly. We are still working hard to satisfy your demands.
NEW QUESTION # 53
Which process is managed by Ministry of Internal Affairs and Communications in Japan?
Answer: B
Explanation:
The correct answer isRF technical standards. In Japan, wireless LAN and other radio equipment must operate under national RF regulatory requirements controlled by the Ministry of Internal Affairs and Communications, commonly referenced as MIC. TELEC, a registered certification body in Japan, states that specified radio equipment such as wireless LAN equipment used in Japan must conform to technical regulations regulated by MIC, and that radio equipment conformity certification validates conformance to the technical standards under Japan's Radio Act.
This aligns directly with Cisco wireless regulatory-domain behavior. Cisco's Catalyst 9800 country-code documentation explains that APs use legal frequencies approved for their regulatory domain, and for Japan regulatory-domain devices, Japan country codes must be configured so the controller and APs operate within permitted channel and power constraints. Cisco also states that country codes are assigned and verified on APs or wireless controllers to ensure regulatory compliance for wireless operation. Manufacturing batch inspection, customer onboarding, and supplier-chain evaluation are not RF spectrum regulatory functions.
Reference topics:RF Fundamentals - regulatory domains, country codes, channel legality, transmit-power limits, and wireless compliance.
NEW QUESTION # 54
Which CleanAir feature is used to avoid channels with interference from devices such as outdoor bridges and microwave ovens?
Answer: C
Explanation:
Cisco CleanAir technology is designed to detect, classify, and mitigate RF interference in enterprise wireless networks. Persistent Device Avoidance is a CleanAir feature that identifies non-Wi-Fi sources of interference, such as microwave ovens, outdoor bridges, or other RF devices, and then instructs the wireless LAN controller (WLC) to avoid channels affected by these interferers. By doing so, APs can select cleaner channels, reducing packet loss, improving throughput, and maintaining optimal coverage.
NEW QUESTION # 55
An IT team is deploying Meraki APs at a remote branch and must ensure that they are automatically assigned to the correct network in the Meraki dashboard. The branch is scheduled to receive 20 new APs, and site connectivity to headquarters was set up. Before shipping the APs, the team must make sure that each one is claimed by the intended network for management and monitoring. Which deployment action must they take before physically connecting the APs?
Answer: A
Explanation:
When deploying Meraki APs, it is essential to claim each AP in the Meraki dashboard to ensure that they are automatically assigned to the correct network and can be managed remotely. This process involves registering the APs with the Meraki cloud, which is done by adding the AP serial numbers to the network within the Meraki dashboard before physically installing them at the branch.
Option B: "Add the AP serial numbers to the required network within the Meraki dashboard."This is the correct answer. Before the APs are physically connected, the administrator needs to log into the Meraki dashboard and add the serial numbers of the new APs to the intended network. This ensures that once the APs are powered on and connected, they automatically join the correct network and are ready for monitoring and management without requiring further configuration.
Option A: "Activate mesh networking mode for all the new APs before installation."Mesh networking mode is used when APs need to communicate wirelessly to extend coverage, but it is not a requirement for the deployment and registration process. The APs should be connected normally for initial setup, and mesh mode can be enabled later if needed.
Option C: "Preconfigure SSID names and VLAN tags on the local page of each AP in the Meraki dashboard." While configuring SSID and VLAN settings is essential, this is not the first action required for ensuring the APs are claimed by the correct network. The priority is to add the AP serial numbers to the Meraki dashboard for proper network assignment.
Option D: "Create a separate DHCP scope for all the new APs on the local server."DHCP scope configuration is important for assigning IP addresses, but this is not the primary step for ensuring the APs are correctly registered in the Meraki dashboard. The APs can obtain IP addresses from an existing DHCP scope once they are connected and claimed in the dashboard.
Therefore, the best approach isOption B, as it ensures that the APs are correctly assigned to the intended network in the Meraki cloud, ready for management and monitoring once connected.
NEW QUESTION # 56
A customer requires wireless clients to maintain uninterrupted voice calls while roaming between access points. Which Cisco wireless feature minimizes roaming delay?
Answer: C
Explanation:
802.11r Fast Transition accelerates roaming by reducing the authentication exchange required when clients move between APs. This minimizes handoff delay and supports latency-sensitive applications such as VoIP. WPA3 improves security, while AVC and accounting services do not directly optimize roaming performance.
NEW QUESTION # 57 
Refer to the exhibit. An engineer must configure a wireless guest WLAN, which requires clients to use VLAN
10 for a deployment at site A. Based on the configuration commands shown, which additional configuration meets the requirements?
Answer: D
Explanation:
In Cisco Catalyst 9800 WLAN configurations, assigning a VLAN to a WLAN is done using theaccess vlan < vlan-id > command under the WLAN context. This ensures that clients associating with the guest SSID are placed in the correct Layer 2 VLAN for proper segmentation and network access. The exhibit shows that security features are removed and the WLAN is operational, but no VLAN is yet assigned. Option A correctly usesaccess vlan 10under the WLAN configuration, enabling client traffic to be tagged or untagged into VLAN
10 for site A deployment. Option B is invalid syntax; simply usingvlan 10is insufficient and not recognized in IOS XE WLAN configuration. Options C and D involvepolicy profilecommands, which define WLAN policies but do not directly assign the VLAN to the guest WLAN itself. Cisco Wireless Core Technologies emphasize that proper VLAN assignment ensures guest isolation, correct DHCP assignment, and traffic segregation, which is critical for security and compliance in enterprise deployments. Assigning the VLAN in this manner also allows downstream switches to correctly forward traffic to the intended network segment.
Reference topics:Client Connectivity Configuration - WLAN VLAN assignment, guest SSID, access vlan, Cisco Catalyst 9800.
NEW QUESTION # 58
......
Looking for customizable Implementing and Operating Cisco Wireless Core Technologies (350-101) practice exams? Look no further than GuideTorrent! Our desktop and web-based practice exams allow candidates to set their own schedule and choose which Cisco 350-101 questions to include in the exam. With a real exam environment, our practice tests help test takers prepare for the test pressure they will face during the final exam. Don't leave your success to chance - choose GuideTorrent for your Implementing and Operating Cisco Wireless Core Technologies (350-101) practice exams.
350-101 Test Cram Review: https://www.guidetorrent.com/350-101-pdf-free-download.html
BTW, DOWNLOAD part of GuideTorrent 350-101 dumps from Cloud Storage: https://drive.google.com/open?id=1EaDvTcKOGHEwztqSZPk3CEFd01-7fNYS