NSEI_OTS_AR-7.6証明書は、クライアントの知識と実用能力を向上させる実用性と役割のため、多数の証明書の中でも際立っています。テストNSEI_OTS_AR-7.6証明書を所有することは、クライアントが仕事を見つけ、クライアントが有能な人々であることの証拠を見つけるときに重いコーリングカードを所有することと同じです。 NSEI_OTS_AR-7.6クイズ準備は、クライアントがテストの準備をするのに最適なオプションです。 NSEI_OTS_AR-7.6学習資料は、高い合格率とヒット率を高めます。クライアントは、それらを使用した後に高く評価し、NSEI_OTS_AR-7.6認定に合格するための重要なツールとして認識します。
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Asset Management | 25% | - Device detection and inventory using FortiGate & FortiNAC - OT security standards and compliance (IEC 62443, NIST) - Fortinet Security Fabric for OT environments |
| Topic 2: Network Access Control | 25% | - Purdue Model and secure network segmentation - Authentication and access policies for OT devices - OT Ethernet and industrial communication models |
| Topic 3: Network Security | 25% | - Virtual patching for legacy OT systems - Deep inspection for industrial protocols (Modbus, DNP3, OPC) - Security automation and threat response |
| Topic 4: Monitoring and Risk Assessment | 25% | - Threat detection using FortiSIEM 7.4 - OT-focused risk assessment and management - Event handling and logging with FortiAnalyzer 7.6 |
CertShiken当社の専門家は、Fortinet NSEI_OTS_AR-7.6の試験概要に従って教科書を書き直し、すべての重要な問題を収集し、重要なメモを作成して、集中的にレビューできるようにしました。 専門家は、例、図、その他の方法を通じて、すべての不可解な知識ポイントの信頼できる解釈も実施しました。 NSEI_OTS_AR-7.6学習教材で使用される表現は非常に理解しやすいです。 業界の新人であっても、専門知識を非常に簡単に理解できます。 NSEI_OTS_AR-7.6トレーニングトレント：Fortinet NSE I - OT Security 7.6 Architectは、準備に最適な学習ガイドです。
質問 # 44
Refer to the exhibit.
An industrial Ethernet protocol skipping layers 3 to 6 is shown. Which industrial Ethernet protocol is it?
(Choose one answer)
正解：C
解説：
The correct answer is D. EtherCAT . The study guide explicitly states under the Ethernet/IP and EtherCAT section that "EtherCAT is a protocol that offers real-time communication in a primary-secondary configuration" and "EtherCAT skips layers 3 to 6 to deliver real-time communication." It also adds that
"the most important feature of this protocol is that secondary devices collect only the information they need from the data packets." This matches the exhibit exactly, where the diagram shows Real-Time Data above a Proprietary MAC and Proprietary physical layer , reflecting the protocol structure that bypasses the intermediate OSI layers.
The other options do not match this behavior. The guide says POWERLINK uses layer 2 and layer 7 of the OSI model, not that it skips layers 3 to 6. It also explains that Ethernet/IP is the industrial protocol based entirely on Ethernet standards and adapts to the OSI model. Modbus is described as an open client/server protocol and is not suitable for transmitting data in real time . Therefore, the protocol in the exhibit is clearly EtherCAT .
質問 # 45
You want to protect OT devices that are not updated against known vulnerabilities so you apply virtual patching to the firewall policies. What must you check to confirm that the OT devices are virtually patched?
(Choose one answer)
正解：A
解説：
The correct answer is C. The output of the CLI command get rule otvp status . In the Virtual Patching section, the study guide shows the workflow where FortiGate queries FortiGuard for device-specific vulnerabilities, receives OT virtual patching signatures, maps them to the device MAC address, and then explicitly displays the CLI verification command get rule otvp status together with fields such as Rule-name
, Vuln_type , and Cve . This is the direct confirmation mechanism shown in the guide for checking whether OT devices have virtual patching rules associated with them.
The other options are less accurate for confirmation. The OT View page is for Purdue-level visualization, and the Asset Identity List page shows device and asset information, but neither is presented in the guide as the command or control used to verify virtual patching status. The study guide specifically uses get rule otvp status as the status check tied to virtual patching behavior.
質問 # 46
Refer to the exhibit.
A partial Application Sensor profile is shown. When you apply this profile in firewall policy, which two statements are correct? (Choose two answers)
正解：C、D
解説：
The correct answers are A and C . The study guide explains that "You can use application control signatures to detect OT protocols" and that application control provides "granular message type identification." In the exhibit, the Operational Technology application category is included in the Application Sensor profile, so OT application signatures are enabled in this profile.
Option C is also correct because the override table shows Modbus_Read.Holding.Registers = Allow and Modbus = Block . The study guide states that you can use specific granular application control signatures to allow a specific Modbus command and block all others , and it also shows that application control can identify read and write commands separately at message level. Therefore, Modbus write commands are blocked by this profile.
Option B is incorrect because the profile is not simply monitoring all OT protocols; it contains a Block action for Modbus. Option D is incorrect because the study guide links OT protocol visibility specifically to the monitor status , while in the exhibit Modbus_Read.Holding.Registers is set to Allow , not Monitor .
質問 # 47
Refer to the exhibit.
A Virtual Patching profile is shown. You have recently updated your SCADA system and would like to apply the SCADA virtual patching profile. Which two statements about this profile are correct? (Choose two answers)
正解：A、D
解説：
The correct answers are B and D .
Option B is correct because the profile has Medium , High , and Critical selected, while Low severity is not selected. That means low-severity virtual patching signatures are not enforced by this profile. So for the device with MAC address 12:12:12:12:12 , low-severity signatures are not blocked. The study guide explains virtual patching as device-specific protection where "FortiGate caches the signatures and mitigation rules that apply to each device" and applies them when the related traffic matches the firewall policy.
Option D is correct because the Virtual Patching Exemptions table shows a row with the MAC address 11:
11:11:11:11 and no specific signature listed. The study guide states that in the Virtual Patching profile you can "Exempt a specific device with the MAC address or a specific signature." A MAC-only exemption means that specific device is excluded from virtual patching enforcement, so in practical terms it is treated as having no applicable vulnerabilities in this profile.
Option C is incorrect because the profile does not block critical signatures for all devices. The exemptions list proves that at least one device can be excluded by MAC address, and a specific signature can also be exempted. Therefore, enforcement is not universal across all devices.
Option A is incorrect because the entry Schneider.Electric.ClearSCADA.HTTP.Interface.XSS appears as a specific signature exemption , not as the only remaining vulnerability. The profile display is showing exemptions, not a statement that only one vulnerability is still present.
質問 # 48
Refer to the exhibit.
A Logical Topology page of a FortiGate device is shown. Your OT company wants to gain visibility into the network. You decide to implement device detection with the Security Fabric. Based on the exhibit, which statement is correct? (Choose one answer)
正解：B
解説：
The correct answer is A. Device Detection is enabled on the other identified device .
The study guide explains that device identification is a "useful feature for the Security Fabric topology view" and that "FortiGate detects most third-party devices in your network and adds them to the topology view of the Security Fabric." It also states that in the interfaces section, you can enable device detection , and this detection is what allows FortiGate to identify devices based on observed traffic.
In the exhibit, the tooltip distinguishes between "1 device requires authorization" and "1 other identified device." That means the unauthorized device is a separate FortiGate/Fabric member issue, while the other identified device is simply a detected third-party device shown in the topology because device detection is working. Therefore, the correct interpretation is that device detection is enabled for that identified device.
Option B is incorrect because the exhibit does not say the other identified device requires authorization.
Option C is not supported by the study guide, and option D is too specific because no evidence in the exhibit confirms that the detection was enabled specifically on port3 .
質問 # 49
......
近年、IT領域で競争がますます激しくなります。IT認証は同業種の欠くことができないものになりました。あなたはキャリアで良い昇進のチャンスを持ちたいのなら、CertShikenのFortinetのNSEI_OTS_AR-7.6「Fortinet NSE I - OT Security 7.6 Architect」試験トレーニング資料を利用してFortinetの認証の証明書を取ることは良い方法です。現在、FortinetのNSEI_OTS_AR-7.6認定試験に受かりたいIT専門人員がたくさんいます。CertShikenの試験トレーニング資料はFortinetのNSEI_OTS_AR-7.6認定試験の１００パーセントの合格率を保証します。
NSEI_OTS_AR-7.6受験資料更新版: https://www.certshiken.com/NSEI_OTS_AR-7.6-shiken.html