Exam H12-351_V1.0 Book & H12-351_V1.0 Pass4sure Dumps Pdf

BTW, DOWNLOAD part of TestkingPass H12-351_V1.0 dumps from Cloud Storage: https://drive.google.com/open?id=1mVqQFvqBqlGuc7B_87QDbkZj04Js_NzQ

The contents of our H12-351_V1.0 study materials are all compiled by industry experts based on the examination outlines and industry development trends over the years. H12-351_V1.0 exam guide is not simply a patchwork of test questions, but has its own system and levels of hierarchy, which can make users improve effectively. Our H12-351_V1.0 Study Materials contain test papers prepared by examination specialists according to the characteristics and scope of different subjects. And if you study with our H12-351_V1.0 exam questions, you are bound to pass the H12-351_V1.0 exam.

Huawei H12-351_V1.0 Exam Syllabus Topics:

Section	Objectives
Topic 1: WLAN Optimization and Troubleshooting	- Roaming optimization - RF optimization and interference analysis - Performance troubleshooting and monitoring
Topic 2: WLAN Fundamentals	- Wireless communication principles - 802.11 standards and evolution - RF fundamentals and propagation
Topic 3: WLAN Deployment and Configuration	- CAPWAP protocol and AP onboarding - Huawei WLAN architecture (AC, AP, Fit/Fat mode) - SSID and authentication configuration
Topic 4: WLAN Planning and Design	- Site survey and requirement analysis - Frequency planning and channel allocation - WLAN capacity and coverage design
Topic 5: WLAN Security	- 802.1X and RADIUS authentication - WPA/WPA2/WPA3 security mechanisms - Access control and encryption methods
Topic 6: Advanced WLAN Technologies	- High-density WLAN scenarios - Cloud management and intelligent O&M - Enterprise WLAN solutions

>> Exam H12-351_V1.0 Book <<

H12-351_V1.0 Pass4sure Dumps Pdf & Reliable H12-351_V1.0 Test Experience

You want to get the most practical and useful certificate which can reflect your ability in some area. If you choose to attend the test H12-351_V1.0 certification buying our H12-351_V1.0 study materials can help you pass the test and get the valuable certificate. Our company has invested a lot of personnel, technology and capitals on our products and is always committed to provide the top-ranking H12-351_V1.0 Study Materials to the clients and serve for the client wholeheartedly.

Huawei HCIE-WLAN (Written) V1.0 Sample Questions (Q132-Q137):

NEW QUESTION # 132
No data is displayed on the Telemetry management page of (Master NCE-Campuslnsight. Which of the following are possible causes?

A. Telemetry data reporting is no: configured on the device according to the guide.
B. The UTC lime on the device is inconsistent with that on iMaster NCE-Campuslnsight.
C. The device is not added to iMaster NCE-Campuslnsight.
D. No license file is imported.
E. The network between the device and iMaster NCE-Campuslnsight is disconnected.

Answer: A,B,C,D,E

NEW QUESTION # 133
An AP may preferentially use the BTM mode to steer some STAs. With which of the following protocols are such STAs compliant?

A. 802.11k
B. 802.11i
C. 802.11r
D. 802.11v

Answer: D

Explanation:
An AP may preferentially use the BTM mode to steer some STAs that are compliant with 802.11v protocol.
BTM stands for BSS Transition Management, which is a feature defined in 802.11v protocol that allows an AP to send a request to a STA to switch to another BSS.
References: https://support.huawei.com/enterprise/en/doc/EDOC1100058940/8a8f1c9b/btm

NEW QUESTION # 134
802. 11r fast roaming (over-the-air) is enabled on the WLAN shown in the figure. A STA roams from AP1 to AP2. Sort the steps in chronological order during the 802.11r fast roaming process between WACs.

Answer:

Explanation:

Explanation:
According to the Huawei documents and resources, the chronological order during the 802.11r fast roaming process between WACs is as follows:
2.The STA accesses the network through API. This is the initial association process before roaming.
1.The STA initiates an 802.11 FT authentication request to AP2. This is the first step of the roaming process when the STA moves to a new AP.
3.AP2 starts the reassociation timer, and sends an 802.11 FT authentication response to the STA. This is the second step of the roaming process when AP2 responds to the STA's request and sets a timer for reassociation.
4.The STA generates and installs a P TK based on the information contained in the response frame. This is the third step of the roaming process when the STA derives a new pairwise key for encryption.
5.The STA sends a reassociation request to AP2. This is the fourth step of the roaming process when the STA requests to reassociate with AP2.
6.AP2 generates and installs a PTK according to PMK-RI and information contained in the request frame.
This is the fifth step of the roaming process when AP2 derives the same pairwise key as the STA.
7.After receiving the reassociation request, AP2 disables the reassociation timer, and then sends a reassociation reg onse to the STA. This is the sixth step of the roaming process when AP2 confirms the reassociation with the STA and stops the timer.
8.The STA receives the response frame of AP2. The roaming process is complete. This is the final step of the roaming process when the STA completes the handover to AP2.
Therefore, 2, 1, 3, 4, 5, 6, 7, 8 is the correct answer. References: https://support.huawei.com/enterprise/en/doc
/EDOC1100169459/8d79210e/configuring-wireless-mesh-networking

NEW QUESTION # 135
Which of the following statements is false about WIDS/WIPS?

A. If WIDS is configured on an AP radio, the radio cannot be used to set up a WDS bridge or mesh link.
B. In HSB scenarios, WIDS entries on the active WAC can be backed up to the standby WAC
C. After air scan is enabled, you are advised to use an independent radio for air scan if latency-sensitive services, such as video conferencing, are running on the network.
D. When an AP works in normal mode, the delay may increase instantaneously during the radio scan period.

Answer: B

NEW QUESTION # 136
Which of the following statements about VXLAN is false?

A. A Layer 2 VXLAN gateway forwards traffic to a VXLAN network and can also be used for Intra-subnet communication on the same VXLAN network.
B. A VBDIF interface is a logical interface created based on a BD. It is similar to a VLANIF interface on a traditional network.
C. A Layer 3 VXLAN gateway is used for inter-subnet communication on a VXLAN network and communication with external non-VXLAN networks.
D. Layer 2 and Layer 3 VXLAN gateways must maintain VBDIF interfaces. Otherwise, users cannot communicate with each other through these interfaces.

Answer: D

Explanation:
Explanation
B is false because only Layer 3 VXLAN gateways need to maintain VBDIF interfaces for inter-subnet communication on a VXLAN network or communication with external non-VXLAN networks. Layer 2 VXLAN gateways do not need VBDIF interfaces.
References: https://support.huawei.com/enterprise/en/doc/EDOC1100058940/8a8f1c9b/vxlan-gateway

NEW QUESTION # 137
......

TestkingPass's study material is available in three different formats. The reason we have introduced three formats of the HCIE-WLAN (Written) V1.0 (H12-351_V1.0) practice material is to meet the learning needs of every student. Some candidates prefer H12-351_V1.0 practice exams and some want Real H12-351_V1.0 Questions due to a shortage of time. At TestkingPass, we meet the needs of both types of aspirants. We have Huawei H12-351_V1.0 PDF format, a web-based practice exam, and HCIE-WLAN (Written) V1.0 (H12-351_V1.0) desktop practice test software.

H12-351_V1.0 Pass4sure Dumps Pdf: https://www.testkingpass.com/H12-351_V1.0-testking-dumps.html

DOWNLOAD the newest TestkingPass H12-351_V1.0 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1mVqQFvqBqlGuc7B_87QDbkZj04Js_NzQ