All three formats of Cisco 300-110 practice test are available with up to three months of free Cisco 300-110 exam questions updates, free demos, and a satisfaction guarantee. Just pay an affordable price and get Cisco 300-110 updated exam dumps today. Best of luck!
| Section | Weight | Objectives |
|---|---|---|
| Wireless Site Survey | 25% | - Layer 1 site survey execution and analysis - RF propagation and attenuation analysis - Pre-deployment survey and validation - Design requirements collection and constraint evaluation
|
| Mobility Design | 25% | - Roaming optimization
- Mobility architecture models
|
| Wireless Infrastructure Design | 30% | - Wired-wireless integration design
|
| WLAN High Availability and Security Design | 20% | - High availability design
- Security architecture design
|
In recent year, certificate for the exam has raised great popularity, since certificate may be directly related to the salary or your future development. We have 300-110 Exam Dumps to help you get a certificate you want. The quality of the 300-110 learning materials is reliable, and it has gotten popularity in our customer. Besides if you have any questions, please contact with our service stuff, we will give you reply as quickly as possible, and if you are very urgent, you can just contact our live chat service stuff.
NEW QUESTION # 43
A customer has two Cisco Catalyst 9800 Series WLCs named WLC-A and WLC-B in an N+1 configuration with the same WLANs but different Layer 3 interfaces for each WLC, and APs in local mode. WLC-A manages Building A APs and WLC-B manages Building B APs. The customer wants users to remain connected and retain their session state including the IP address when moving between buildings. How must this requirement be incorporated into the design?
Answer: B
Explanation:
The requirement for users to retain their session state and IP address when roaming between buildings managed by different WLCs is a Layer 3 roaming scenario. In Cisco ' s wireless architecture, IP address preservation across controller boundaries is achieved through inter-controller mobility - specifically the foreign-anchor mobility tunnel mechanism. When a client roams from Building A (WLC-A) to Building B (WLC-B), WLC-B becomes the foreign controller and WLC-A becomes the anchor controller. WLC-B tunnels the client ' s traffic back to WLC-A, allowing the client to retain its original IP address even while physically associated to an AP managed by WLC-B. This requires a mobility tunnel between WLC-A and WLC-B with both controllers configured in the same mobility group name - the group name is the trust identifier that permits the mobility tunnel and anchor-foreign relationship to form. Without the same group name, the controllers will not form a trusted mobility peer relationship. AP groups (Option C) control SSID and VLAN assignments per AP cluster but have no impact on inter-controller roaming. HA cluster configuration (Option B) creates SSO redundancy, not roaming capability between separate N+1 controllers.
Redundancy port connection (Option D) is used for SSO keepalive and state sync, not mobility tunneling.
Reference: WLSD Study Guide - Inter-Controller Mobility, Mobility Tunnels, Layer 3 Roaming and IP Address Preservation.
NEW QUESTION # 44
A customer has a Cisco wireless network that supports VoWLAN services. The customer wants supported voice clients to receive roaming recommendations and suggestions from APs. This functionality must not impact non-VoWLAN clients. What should be enabled on the VoWLAN SSID?
Answer: C
Explanation:
IEEE 802.11v BSS Transition Management is the standard that enables the network (via the AP) to actively provide roaming recommendations and suggestions to associated clients. When enabled on a SSID, the AP can send BSS Transition Management Request frames to clients, informing them of preferred target APs ranked by signal quality, load, and channel conditions.
Critically, BSS Transition Management is a voluntary mechanism -- clients that support 802.11v can act on the AP's recommendation, while clients that do not support 802.11v simply ignore the BSS Transition Request frames and continue operating normally. This selective applicability directly satisfies the requirement that non-VoWLAN clients must not be impacted.
NEW QUESTION # 45
A customer purchases this Cisco equipment for a new branch office: ?20 Cisco Catalyst 9120 APs ?five Catalyst 9130 APs ?a single Catalyst 9300 Series Switch The customer wants to extend its existing wired and wireless fabric-enabled network to the branch office and manage all devices via a centrally deployed Cisco Catalyst Center (formerly DNA Center). Which Cisco Catalyst Center licenses are required for the branch office equipment?
Answer: B
Explanation:
Cisco Catalyst Center uses a tiered licensing model -- Essentials and Advantage -- applied to both switching and wireless infrastructure. To enable a fully fabric-enabled (SD-Access) deployment with centralized management, the Cisco Catalyst Advantage license is required across all device types. The Advantage tier unlocks Software-Defined Access fabric capabilities including macro and micro- segmentation, integration with Cisco ISE for policy enforcement, AI/ML-driven analytics via DNA Spaces and Assurance, and automated provisioning. The Essentials license provides only basic device management, inventory, and software image management -- it does not unlock SD-Access fabric functionality. Since the branch design specifically extends an existing fabric-enabled network, the Essentials tier for either the switch or APs would create a licensing gap preventing full fabric participation.
NEW QUESTION # 46
An engineer is designing the wired infrastructure to support VoWLAN. Which QoS design should be applied to the switch ports connecting the APs?
Answer: C
Explanation:
In a centrally switched CAPWAP deployment, client traffic is encapsulated between the AP and the controller, and the AP copies the QoS marking from the inner client packet into the DSCP field of the outer CAPWAP header. If the switch port connecting the AP does not trust DSCP, the switch rewrites those markings to zero at ingress and every voice packet loses its priority treatment for the remainder of its journey across the wired network. Trusting DSCP on the AP- facing port preserves the marking end to end and allows the campus queueing policies to place voice into the priority queue. Trusting CoS is ineffective here because the AP-to-switch link is typically an access port carrying untagged frames with no 802.1p field to trust. Leaving the port untrusted or policing it aggressively strips or drops the very traffic the design is intended to protect, and omitting trust configuration on a switch that defaults to untrusted produces the same failure.
NEW QUESTION # 47
A wireless engineer must design a backhaul link. The engineer has a mesh access point that has a wired connection back to the infrastructure. What must be changed in the AP role before a change is made in the AP mode?
Answer: D
Explanation:
In Cisco mesh networking architecture, access points are classified into two primary roles: Root Access Points (RAP) and Mesh Access Points (MAP). A RAP is an access point that maintains a wired Ethernet backhaul connection back to the network infrastructure, while a MAP operates wirelessly, relying on mesh backlinks to upstream RAPs. When an engineer needs to change an AP mode -- such as switching to bridge mode to extend the mesh -- the AP role must first be defined correctly. The AP must be designated as a RAP before any mode-level configuration changes are applied. This sequencing is critical because the AP role defines the fundamental backhaul path; changing the mode without first establishing the role results in misconfiguration and potential connectivity loss. The RAP communicates directly with the wired infrastructure via its Ethernet port, making it the gateway for all downstream MAPs in the mesh topology.
NEW QUESTION # 48
......
When we update the 300-110 preparation questions, we will take into account changes in society, and we will also draw user feedback. If you have any thoughts and opinions in using our 300-110 study materials, you can tell us. We hope to grow with you and the continuous improvement of 300-110 training engine is to give you the best quality experience. And you can get the according 300-110 certification as well.
300-110 Cert: https://www.trainingquiz.com/300-110-practice-quiz.html