Pass4Test kann Ihnen nicht nur die ausgezeichnete Prüfungsunterlagen zur Fortinet NSEI_OTS_AR-7.6 Zertifizierung sondern auch guten Service bieten. Kaufen Sie Pass4Test Dumps, bekommen Sie einjährige kostlose Aktualisierung von Pass4Test. Damit können Sie immer die neuesten Fortinet NSEI_OTS_AR-7.6 Prüfungsfragen besitzen. Falls Sie dieFortinet NSEI_OTS_AR-7.6 Prüfung nicht ausgereicht hätten, gibt Pass4Test Ihnen voll Geld zurück. Und dann machen Sie sich keine Sorge. Wir Pass4Test sind sehr zuversichtlich für unsere Dumps. Glauben Sie bitten auch an uns. Verpassen Sie bitte nicht Pass4Test zu Ihrem Erfolg. Wenn Sie das ignorieren, verlieren die Chance für einen einmaligen Erfolg.
| Section | Objectives |
|---|---|
| Monitoring and risk assessment | - Perform risk assessment and management - Create FortiAnalyzer event handlers - Analyze security reports from FortiAnalyzer |
| Network security | - Configure security inspections for industrial protocols - Configure automation - Configure virtual patching |
| Asset management | - Implement device detection on FortiGate and FortiNAC - Explain OT standard and Fortinet compliance - Fortinet Security Fabric for an OT network |
| Network access control | - Explain OT Ethernet concepts - Configure network segmentation schemas - Configure network access authentication |
>> NSEI_OTS_AR-7.6 Prüfungsaufgaben <<
Die Feedbacks von den IT-Kandidaten, die die schulungsunterlagen zur Fortinet NSEI_OTS_AR-7.6 (Fortinet NSE I - OT Security 7.6 Architect) IT-Prüfung von Pass4Test benutzt haben, haben sich bewiesen, dass es leicht ist, die Prüfung mit Hilfe unserer Pass4Test Produkten zu bestehen. Zur Zeit hat Pass4Test die Schulungsprogramme zur beliebten Fortinet NSEI_OTS_AR-7.6 (Fortinet NSE I - OT Security 7.6 Architect) Zertifizierungsprüfung, die zielgerichteten Prüfungen beinhalten, entwickelt, um Ihr Know-How zu konsolidieren und sich gut auf die Prüfung vorzubereiten.
24. Frage
Refer to the exhibit.
A partial Application Sensor profile is shown. When you apply this profile in firewall policy, which two statements are correct? (Choose two answers)
Antwort: B,D
Begründung:
The correct answers are A and C . The study guide explains that "You can use application control signatures to detect OT protocols" and that application control provides "granular message type identification." In the exhibit, the Operational Technology application category is included in the Application Sensor profile, so OT application signatures are enabled in this profile.
Option C is also correct because the override table shows Modbus_Read.Holding.Registers = Allow and Modbus = Block . The study guide states that you can use specific granular application control signatures to allow a specific Modbus command and block all others , and it also shows that application control can identify read and write commands separately at message level. Therefore, Modbus write commands are blocked by this profile.
Option B is incorrect because the profile is not simply monitoring all OT protocols; it contains a Block action for Modbus. Option D is incorrect because the study guide links OT protocol visibility specifically to the monitor status , while in the exhibit Modbus_Read.Holding.Registers is set to Allow , not Monitor .
25. Frage
Refer to the exhibit.
A partial Incident Analysis page is shown. How was the 360-Degree Security Review OT report attached to the incident? (Choose one answer)
Antwort: C
Begründung:
The study guide says playbooks are used to automate tasks such as running reports and creating/updating incidents . It also says that after a playbook is triggered, it flows through its configured tasks.
It further shows a sample playbook sequence where an event is detected, an incident is created , a report runs , and details are attached to the incident . That is exactly the kind of workflow shown in the incident analysis view.
By contrast, the study guide says event handlers generate events when logs match configured rules. Event handlers are for detection, not for attaching reports to incidents.
26. Frage
Refer to the exhibit.
A Virtual Patching profile is shown. You have recently updated your SCADA system and would like to apply the SCADA virtual patching profile. Which two statements about this profile are correct? (Choose two answers)
Antwort: A,B
Begründung:
The correct answers are B and D .
Option B is correct because the profile has Medium , High , and Critical selected, while Low severity is not selected. That means low-severity virtual patching signatures are not enforced by this profile. So for the device with MAC address 12:12:12:12:12 , low-severity signatures are not blocked. The study guide explains virtual patching as device-specific protection where "FortiGate caches the signatures and mitigation rules that apply to each device" and applies them when the related traffic matches the firewall policy.
Option D is correct because the Virtual Patching Exemptions table shows a row with the MAC address 11:
11:11:11:11 and no specific signature listed. The study guide states that in the Virtual Patching profile you can "Exempt a specific device with the MAC address or a specific signature." A MAC-only exemption means that specific device is excluded from virtual patching enforcement, so in practical terms it is treated as having no applicable vulnerabilities in this profile.
Option C is incorrect because the profile does not block critical signatures for all devices. The exemptions list proves that at least one device can be excluded by MAC address, and a specific signature can also be exempted. Therefore, enforcement is not universal across all devices.
Option A is incorrect because the entry Schneider.Electric.ClearSCADA.HTTP.Interface.XSS appears as a specific signature exemption , not as the only remaining vulnerability. The profile display is showing exemptions, not a statement that only one vulnerability is still present.
27. Frage
Refer to the exhibit.
A partial OT network is shown.
The OT network is divided into two main networks with a FortiGate device operating in NAT mode.
How can you further segment network 1 from network 2?
Antwort: D
Begründung:
The correct answer is C . Fortinet VDOMs partition a physical FortiGate into multiple logical FortiGate devices, with each VDOM maintaining independent security policies, routing tables, and other configurations.
Traffic is confined to its VDOM unless explicit inter-VDOM connectivity is configured. Because the exhibit specifies that FortiGate operates in NAT mode , separate traffic VDOMs are the appropriate method for creating independent security domains for network 1 and network 2. Forward-domain IDs apply specifically to FortiGate operating in transparent mode , where interfaces otherwise share a broadcast domain, so option D does not fit this topology. An implicit software switch places interfaces in the same layer-2 broadcast domain rather than creating stronger separation. Universal ZTNA controls user access to applications and is not a replacement for structural network segmentation. Therefore, two traffic VDOMs provide the required separation.
28. Frage
Refer to the exhibit.
A partial OT network is shown. In this OT network, you must add additional security measures to detect OT protocols and, therefore, increase the traffic visibility. Which security sensor must you implement to detect the OT protocols in this network? (Choose one answer)
Antwort: D
Begründung:
The correct answer is C. Application sensor set to monitor on all the FortiGate devices .
The study guide clearly explains that application control is the feature used to identify OT protocols. It states that "application control detects the protocols used in applications like Modbus, IEC 104, and the contents of the telecontrol messages" and also says "You can use application control signatures to detect OT protocols." It further shows an example where a Modbus application control profile is enabled on a firewall policy "for OT protocol visibility in the monitor status." This directly matches the requirement in the question, which is to detect OT protocols and increase traffic visibility .
The other options do not fit the requirement as precisely. Device detection is for identifying devices and collecting endpoint information, not for detecting industrial protocols. Inline IDS and IPS are focused more on detecting or blocking attacks, exploits, protocol abnormalities, and known vulnerabilities. While IPS can inspect some OT traffic, the study guide distinguishes it from application control by stating that IPS signatures tend to detect exploits, whereas application control signatures tend to provide protocol detection at various levels . Therefore, the required security sensor for OT protocol detection and traffic visibility is the application sensor in monitor mode .
29. Frage
......
Schicken Sie doch die Produkte von Pass4Test in den Warenkorb. Sie werden mit 100% selbstbewusst die Fortinet NSEI_OTS_AR-7.6 Zertifizierungsprüfung nur einmalig erfolgreich ablegen. Sie würden sicher Ihre Wahl nicht bereuen.
NSEI_OTS_AR-7.6 Prüfungsübungen: https://www.pass4test.de/NSEI_OTS_AR-7.6.html