TestSimulate's NSE6_SDW_AD-7.6 exam training materials is more accurate and easier to understand, more authoritative than other NSE6_SDW_AD-7.6 exam dumps provided by any other website. After choose TestSimulate, you won't regret. If you are still worried, you can first try NSE6_SDW_AD-7.6 Dumps Free demo and answers on probation. After you buy TestSimulate's NSE6_SDW_AD-7.6 exam training materials, we guarantee you will pass NSE6_SDW_AD-7.6 test with 100%.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: SD-WAN Rules and Traffic Steering | 20% | - Design application-based and performance-based rules - High availability and load balancing - SD-WAN routing and path selection logic - Configure traffic steering policies |
| Topic 2: SD-WAN Fundamentals and Architecture | 15% | - Application-aware networking concepts - Enterprise SD-WAN architecture and components - Deployment models and design principles - Underlay vs Overlay networks |
| Topic 3: Advanced IPsec and Topologies | 15% | - Hub-and-spoke and full-mesh IPsec architectures - Multihub, multiregion and large-scale deployments - ADVPN configuration and operation - IPsec security and encryption settings |
| Topic 4: SD-WAN Troubleshooting and Optimization | 15% | - Diagnose routing and path selection issues - Troubleshoot SD-WAN rules and session behavior - Performance optimization and error correction - Resolve ADVPN and connectivity problems |
| Topic 5: Centralized Management and Orchestration | 15% | - SD-WAN Manager and overlay orchestration - Branch configuration deployment and templates - Deploy and manage SD-WAN via FortiManager - Monitoring, logging and reporting |
| Topic 6: SD-WAN Setup and Configuration | 20% | - Quality of Service (QoS) integration - Implement Performance SLAs and link monitoring - Design SD-WAN members, zones and interfaces - Configure SD-WAN settings and profiles |
>> Real NSE6_SDW_AD-7.6 Dumps <<
I wonder if you noticed that there are three versions of our NSE6_SDW_AD-7.6 test questions—PDF, software on pc, and app online, which can bring you the greatest convenience. Imagine that if you feel tired or simply do not like to use electronic products to learn, the PDF version of NSE6_SDW_AD-7.6 Test Torrent is best for you. Just like reading, you can print it, annotate it, make your own notes, and read it at any time.
NEW QUESTION # 84
(You want FortiGate to use SD-WAN rules to steer ping local-out traffic.
Which two constraints should you consider? Choose two answers.)
Answer: A,C
Explanation:
In FortiOS 7.6, local-out traffic is traffic generated by the FortiGate itself, such as ping, traceroute, FortiGuard updates, DNS, NTP, and SNMP. Local-out traffic does not traverse the firewall policy engine and therefore behaves differently from forwarded traffic in SD-WAN.
According to the FCSS SD-WAN 7.6 curriculum and Fortinet SD-WAN architecture documentation, local- out traffic does not use SD-WAN by default. Instead, it follows the routing table (static and dynamic routes). To allow local-out traffic to be evaluated by SD-WAN rules, the administrator must explicitly enable local-out SD-WAN processing.
The curriculum also states that only SD-WAN rules using the manual strategy are supported for local-out traffic. SLA-based, application-based, and dynamic strategies are not evaluated for traffic generated by the FortiGate itself. This is a fundamental architectural limitation of SD-WAN in FortiOS 7.6.
Option B is incorrect because FortiGate does not automatically apply SD-WAN rules to ping or traceroute traffic by default. Even these tools follow the routing table unless local-out SD-WAN is enabled.
Option D is incorrect because local-out SD-WAN configuration is global. Individual local-out features do not require separate SD-WAN enablement.
NEW QUESTION # 85
Refer to the exhibit.
The administrator analyzed the traffic between a branch FortiGate and the server located in the data center, and noticed the behavior shown in the diagram.
When the LAN clients located behind FGT1 establish a session to a server behind DC-1, the administrator observes that, on DC-1, the reply traffic is routed overT2. even though T1 is the preferred member in the matching SD-WAN rule.
What can the administrator do to instruct DC-1 to route the reply traffic through the member with the best performance?
Answer: C
NEW QUESTION # 86
Refer to the exhibit. How does FortiGate handle the traffic with the source IP address 10.0.1.130 and for destination of the mail server with the IP address 128.66.0.125?
Answer: A
Explanation:
On FortiGate, a policy route (PBR) with action deny does not drop the traffic outright. Instead, it prevents the traffic from being steered by that policy route, and the packet is then handed back to the regular routing lookup (FIB):
Source 10.0.1.130 matches 10.0.1.128/25
Destination 128.66.0.125 matches 128.66.0.0/24
Router policy says action deny → do not use this policy route
Result: FortiGate falls back to the FIB (normal routing table).
NEW QUESTION # 87
(Refer to the exhibit. The administrator configured two SD-WAN rules to load balance the traffic.
Which interfaces does FortiGate use to steer the traffic from 10.0.1.124 to 10.0.0.254? Choose one answer.)
Answer: A
Explanation:
The exhibit shows the runtime details of two SD-WAN services (rules):
Service(2)
* Mode(manual hash-mode=inbandwidth)
* Members(2): port2 (WAN2), port1 (WAN1)
* Application matching: Facebook, LinkedIn, Game
* Source: 10.0.1.0-10.0.1.255This rule is clearly intended for internet/DIA application steering and does not show a corporate destination range.
Service(3)
* Mode(sla hash-mode=round-robin)
* Members(6): HUB1-VPN1/2/3 and HUB2-VPN1/2/3
* Source: 10.0.1.0-10.0.1.255
* Destination: 10.0.0.0-10.255.255.255
Traffic from 10.0.1.124 to 10.0.0.254 matches Service(3) because the destination IP 10.0.0.254 falls within the destination range 10.0.0.0-10.255.255.255.
Within Service(3), the member list shows SLA results per interface:
* HUB1-VPN2 has sla(0x1) and num of pass(1)
* HUB2-VPN2 has sla(0x2) and num of pass(1)
* The remaining members (HUB1-VPN1, HUB2-VPN1, HUB1-VPN3, HUB2-VPN3) show sla(0x0) and num of pass(0) This indicates that, for Service(3), only HUB1-VPN2 and HUB2-VPN2 are currently meeting the SLA requirements (passing), and because the rule uses hash-mode=round-robin, FortiGate load-balances sessions across the passing members.
Therefore, FortiGate will steer the traffic using HUB1-VPN2 or HUB2-VPN2, which corresponds to Option B.
NEW QUESTION # 88
Which two statements correctly describe what happens when traffic matches the implicit SD-WAN rule? (Choose two.)
Answer: A,E
Explanation:
When traffic matches the implicit SD-WAN rule, no specific SD-WAN service is applied, so the session information output does not show an SD-WAN service ID.
The implicit SD-WAN rule is considered only when no matching entry is found in the policy route table.
NEW QUESTION # 89
......
Passing the NSE6_SDW_AD-7.6 certification can prove that you are very competent and excellent and you can also master useful knowledge and skill through passing the test. Purchasing our NSE6_SDW_AD-7.6 guide torrent can help you pass the exam and it costs little time and energy. The NSE6_SDW_AD-7.6 exam questions have simplified the sophisticated notions. The software boosts varied self-learning and self-assessment functions to check the learning results. The software of our NSE6_SDW_AD-7.6 Test Torrent provides the statistics report function and help the students find the weak links and deal with them.
NSE6_SDW_AD-7.6 Sure Pass: https://www.testsimulate.com/NSE6_SDW_AD-7.6-study-materials.html