In addition to our NSEI_OTS_AR-7.6 exam questions, we also offer a Fortinet Practice Test engine. This engine contains real NSEI_OTS_AR-7.6 practice questions designed to help you get familiar with the actual Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) pattern. Our Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) exam practice test engine will help you gauge your progress, identify areas of weakness, and master the material.
| Section | Objectives |
|---|---|
| Asset Management | - Use Fortinet Security Fabric for an OT network - Implement device detection on FortiGate and FortiNAC - Explain OT standards and Fortinet compliance |
| Network Access Control | - Explain OT Ethernet concepts - Configure network access authentication - Configure network segmentation schemas |
| Network Security | - Configure automation - Configure security inspections for industrial protocols - Configure virtual patching |
| Monitoring and Risk Assessment | - Analyze security reports from FortiAnalyzer - Perform risk assessment and management - Create FortiAnalyzer event handlers |
>> NSEI_OTS_AR-7.6 Reliable Exam Bootcamp <<
Individuals who work with Fortinet affiliations contribute the greater part of their energy working in their work spaces straightforwardly following accomplishing Fortinet NSE I - OT Security 7.6 Architect certification. They don't get a lot of opportunity to spend on different exercises and regarding the Fortinet NSEI_OTS_AR-7.6 Dumps, they need assistance to scrutinize accessible.
NEW QUESTION # 20
You would like to customize your current FortiAnalyzer report to provide a better risk assessment of your OT network. Which two options can you use to enhance your report? (Choose two answers)
Answer: C,E
Explanation:
The correct answers are B. The Datasets library and D. The Chart library .
The study guide explains that a FortiAnalyzer report is built from charts, and that charts consist of two elements: datasets and format . It states: "A FortiAnalyzer report is a set of data organized in charts" and "Charts consist of two elements: Datasets ... and Format." It then goes further in the Customizing Reports section and explicitly says "By default, the Chart Library contains more than 300 charts" and
"By default, the Datasets library contains almost 400 datasets." It also states that you can clone and edit both charts and datasets, and create new ones , which is exactly how you enhance and customize an existing report.
The other options are not the best answers for this question. FortiView can export a chart into a report chart, and Log View can help build a custom dataset and chart from search results, but the question asks which options you can use to enhance the report itself. The study guide identifies the actual report-customization components as the Chart Library and Datasets library . Dashboard library is not presented as a FortiAnalyzer report customization library in this section.
NEW QUESTION # 21
Refer to the exhibits.
A partial Incident Analysis page and the log details related to the event are shown. An attack is reported on your OT network. You analyze the corresponding incident. Based on the information provided on the Incident Analysis page and the log details, which two statements are correct? (Choose two answers)
Answer: D,E
Explanation:
Based on the technical data provided in the exhibits and the OT Security 7.6 Architect curriculum:
* Industrial Protocol Identification (Statement A) : The log details exhibit clearly shows that the Destination Port used in the attack is 502 . According to the study guide ' s section on Industrial Protocol Protection , the standard port used by the Modbus TCP protocol is 502 . Furthermore, the attack name identifies a " Triangle.Research.Nano-10.PLC, " which are industrial controllers commonly utilizing Modbus for communications.
* Attack Mitigation (Statement B) : The log details specify that the Action taken by the FortiGate (Edge-FortiGate) was dropped . In cybersecurity and Fortinet fabric operations, dropping a packet associated with an IPS signature means the traffic was blocked from reaching its target, thereby mitigating the attack.
* Target IP Address (Statement E) : The log detail explicitly lists the Destination IP as 192.168.2.3 .
The Incident Analysis page also titles the incident with dstip:192.168.2.3. While the " Affected Endpoint " is shown as 10.1.5.20 , in an " outgoing " attack direction (as shown in the log), this likely refers to the internal source/attacker IP, whereas the target is the destination IP (192.168.2.3). Thus, Statement E is incorrect.
* Protocol Conflict (Statement C) : The IEC 104 protocol typically utilizes port 2404 . Since the log specifies port 502, Statement C is incorrect.
* Severity Distinction (Statement D) : While the Incident severity is marked as High , the question specifically asks about event severity. The " Events " table at the bottom of the Incident Analysis page shows a " User login/logout failed " event with a medium severity. Because there is a distinction in the management console between the severity of individual events and the aggregated incident, and Statement A and B are technically definitive based on port and action, A and B are the correct architectural choices.
NEW QUESTION # 22
According to the IEC 62443 standard, your security level is 4 . What is your OT environment defending against? (Choose one answer)
Answer: C
Explanation:
According to the OT Security 7.6 Architect study guide regarding IEC 62443 Security Levels :
* Security Level 4 (SL 4) Definition : This level provides " Protection against intentional violation using sophisticated means with extended resources, specific skills, and high motivation " .
* Real-World Application : The study guide specifically notes: " If you are facing a syndicate of cyber extortionists with extensive resources and capabilities, then you should strive for security level 4 " .
* Comparison to other levels :
* SL 1 : Protection against " casual or unintentional system violation " .
* SL 2 : Protection against " intentional violation using simple means with low resources " .
* SL 3 : Protection against " intentional violation using sophisticated means with moderate resources " .
NEW QUESTION # 23
Refer to the exhibit.
A partial Incident Analysis page is shown. How was the 360-Degree Security Review OT report attached to the incident? (Choose one answer)
Answer: A
Explanation:
The study guide says playbooks are used to automate tasks such as running reports and creating/updating incidents . It also says that after a playbook is triggered, it flows through its configured tasks.
It further shows a sample playbook sequence where an event is detected, an incident is created , a report runs , and details are attached to the incident . That is exactly the kind of workflow shown in the incident analysis view.
By contrast, the study guide says event handlers generate events when logs match configured rules. Event handlers are for detection, not for attaching reports to incidents.
NEW QUESTION # 24
Refer to the exhibit.
A partial OT network is shown. In this OT network, you must add additional security measures to detect OT protocols and, therefore, increase the traffic visibility. Which security sensor must you implement to detect the OT protocols in this network? (Choose one answer)
Answer: A
Explanation:
The correct answer is C. Application sensor set to monitor on all the FortiGate devices .
The study guide clearly explains that application control is the feature used to identify OT protocols. It states that "application control detects the protocols used in applications like Modbus, IEC 104, and the contents of the telecontrol messages" and also says "You can use application control signatures to detect OT protocols." It further shows an example where a Modbus application control profile is enabled on a firewall policy "for OT protocol visibility in the monitor status." This directly matches the requirement in the question, which is to detect OT protocols and increase traffic visibility .
The other options do not fit the requirement as precisely. Device detection is for identifying devices and collecting endpoint information, not for detecting industrial protocols. Inline IDS and IPS are focused more on detecting or blocking attacks, exploits, protocol abnormalities, and known vulnerabilities. While IPS can inspect some OT traffic, the study guide distinguishes it from application control by stating that IPS signatures tend to detect exploits, whereas application control signatures tend to provide protocol detection at various levels . Therefore, the required security sensor for OT protocol detection and traffic visibility is the application sensor in monitor mode .
NEW QUESTION # 25
......
ValidBraindumps is a trusted platform that is committed to helping Fortinet NSEI_OTS_AR-7.6 exam candidates in exam preparation. The Fortinet NSEI_OTS_AR-7.6 exam questions are real and updated and will repeat in the upcoming Fortinet NSEI_OTS_AR-7.6 Exam Dumps. By practicing again and again you will become an expert to solve all the Fortinet NSEI_OTS_AR-7.6 exam questions completely and before the exam time.
Latest NSEI_OTS_AR-7.6 Exam Questions: https://www.validbraindumps.com/NSEI_OTS_AR-7.6-exam-prep.html