What's more, part of that PrepAwayETE JN0-481 dumps now are free: https://drive.google.com/open?id=1Agx3PIgg7qWOpQdLj5ALmVm4MAKgegVc
The contents of JN0-481 study materials are all compiled by industry experts based on the examination outlines and industry development trends over the years. And our JN0-481 exam guide has its own system and levels of hierarchy, which can make users improve effectively. Our JN0-481 learning dumps can simulate the real test environment. After the exam is over, the system also gives the total score and correct answer rate.
| Certification Vendor: | Juniper Networks |
|---|---|
| Exam Name: | Junos Data Center, Specialist (JNCIS-DC) |
| Exam Number: | JN0-481 |
| Exam Format: | Multiple-response, Scenario-based questions, Multiple-choice |
| Related Certifications: | JNCIP-DC JNCIE-DC JNCIA-DC |
| Available Languages: | English |
| Certificate Validity Period: | 3 years |
| Exam Price: | $300 USD (may vary by region) |
| Exam Duration: | 90 minutes |
| Passing Score: | Approximately 60โ70% |
| Real Exam Qty: | Approximately 65 |
| Recommended Training: | Juniper Data Center Training Courses EVPN-VXLAN Learning Resources |
| Exam Registration: | Pearson VUE Juniper Exams Juniper Certification Portal |
| Sample Questions: | Juniper JN0-481 Sample Questions |
| Exam Way: | Online proctored or Pearson VUE test center |
| Pre Condition: | JNCIA-DC is recommended but not strictly required |
| Official Syllabus URL: | https://www.juniper.net/us/en/training/certification/certification-tracks/data-center.html |
>> JN0-481 Valid Braindumps Questions <<
It is heartening to announce that all PrepAwayETE users will be allowed to capitalize on a free Juniper JN0-481 exam questions demo of all three formats of the Juniper JN0-481 practice test. It will make them scrutinize how our formats work and what we offer them, for example, the form and pattern of Juniper JN0-481 Exam Dumps, and their relevant and updated answers. It is convenient for our consumers to check PrepAwayETE Juniper JN0-481 exam questions free of charge before purchasing the Data Center, Specialist (JNCIS-DC) practice exam.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
NEW QUESTION # 83
You are creating a template using Juniper Apstra.
In this scenario, what is a rack-based design compared to a pod-based design?
Answer: C
Explanation:
In Juniper Apstra:
A rack-based design typically maps to a three-stage Clos topology, where racks are the unit of scale and directly connect to spine devices.
A pod-based design corresponds to a five-stage Clos topology, where multiple racks are grouped into pods, and the fabric scales further using additional layers (e.g., super spines).
NEW QUESTION # 84
In Juniper Apstra. which three modes are available for devices? (Choose three.)
Answer: A,C,D
Explanation:
Juniper Apstra supports three deploy modes for devices: Deploy, Drain, and Ready. These modes determine the configuration and state of the devices in the data center fabric.
Deploy: This mode applies the full Apstra-rendered configuration to the device, according to the Apstra Reference Design. The device state becomes IS-ACTIVE and the device is ready to carry traffic in the fabric.
Drain: This mode adds a "drain" configuration to the device, which prevents any new traffic from entering the device. The device state becomes IS-READY and the device is prepared for maintenance or decommissioning.
Ready: This mode removes the Apstra-rendered configuration from the device, leaving only the basic configuration such as device hostname, interface descriptions, and port speed/breakout.
The device state becomes IS-READY and the device is not part of the fabric.
NEW QUESTION # 85
Which two actions are required during Juniper Apstra's deploy phase? (Choose two.)
Answer: A,D
Explanation:
The deploy phase is the final step in the Juniper Apstra data center fabric design and deployment process. In this phase, you apply the Apstra-rendered configuration to the devices and verify the intent of the blueprint. Based on the web search results, we can infer the following actions are required during the deploy phase:
Assign device profiles to the blueprint. This action associates a specific vendor model to each logical device in the blueprint. Device profiles contain extensive hardware model details, such as form factor, ASIC, CPU, RAM, ECMP limit, and supported features. Device profiles also define how configuration is generated, how telemetry commands are rendered, and how configuration is deployed on a device. Device profiles enable the Apstra system to render and deploy the configuration according to the Apstra Reference Design. Assign resources to the blueprint. This action allocates the physical devices, IP addresses, VLANs, and ASNs to the logical devices, networks, and routing zones in the blueprint. Resources can be assigned manually or automatically by the Apstra system. Assigning resources ensures that the blueprint has all the necessary elements to generate the configuration and deploy the fabric5 . Assign user roles to the blueprint. This action is not required during the deploy phase. User roles are defined at the system level, not at the blueprint level. User roles determine the permissions and access levels of different users in the Apstra system. User roles can be system-defined or custom-defined .
Assign interface maps to the blueprint. This action is not required during the deploy phase.
Interface maps are defined at the design phase, not at the deploy phase. Interface maps are objects that map the logical interfaces of a logical device to the physical interfaces of a device profile. Interface maps enable the Apstra system to generate the correct interface configuration for each device in the fabric.
NEW QUESTION # 86
Which two statements are correct about a Juniper Apstra server? (Choose two.)
Answer: B,D
Explanation:
Juniper Apstra server processes are stateful, meaning they maintain context to support intent- based operations and ensure consistency across the system.
The Apstra server provides REST API endpoints that the UI consumes, enabling programmatic access to all functions available in the UI.
NEW QUESTION # 87
You are building a blueprint using Juniper Apstra and must change the cable map to match the physical environment.
Where in the blueprint UI is this task accomplished?
Answer: C
Explanation:
To modify the cable map in Juniper Apstra so it matches the actual physical environment, you must do it in the Staged โ Physical โ Links section of the blueprint UI. Changes made in the staged view allow adjustments before committing them to the active fabric.
NEW QUESTION # 88
......
JN0-481 Exam Study Guide: https://www.prepawayete.com/Juniper/JN0-481-practice-exam-dumps.html
BONUS!!! Download part of PrepAwayETE JN0-481 dumps for free: https://drive.google.com/open?id=1Agx3PIgg7qWOpQdLj5ALmVm4MAKgegVc