BONUS!!! Download part of Exams-boost F5CAB3 dumps for free: https://drive.google.com/open?id=1iLp2M5JTrBpbhuzSVYGGCmpg_wwW883O
The feedback collected was used to design our products through interviews with top BIG-IP Administration Data Plane Configuration F5CAB3 exam professionals. You are certain to see questions similar to the questions on this F5 F5CAB3 exam dumps on the main F5CAB3 Exam. All you have to do is select the right answer, which is already in the F5 F5CAB3 questions. BIG-IP Administration Data Plane Configuration F5CAB3 exam dumps have mock exams that give you real-life exam experience.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
Today is the right time to advance your career. Yes, you can do this easily. Just need to pass the F5CAB3 certification exam. Are you ready for this? If yes then get registered in F5 F5CAB3 certification exam and start preparation with top-notch F5CAB3 Exam Practice questions today. These F5CAB3 questions are available at Exams-boost with up to 1 year of free updates. Download Exams-boost F5CAB3 exam practice material demo and check out its top features.
NEW QUESTION # 44
An LTM device has a virtual server mapped to www.f5.com with a pool assigned. The objects are defined as follows: Virtual server: Destination 192.168.245.100:443 netmask 255.255.255.0. Persistence: Source address persistence netmask 255.0.0.0. SNAT: Automap. Profiles: HTTP/TCP. How should the BIG-IP Administrator modify the persistence profile so that each unique IP address creates a persistence record?
Answer: D
Explanation:
Source Address Affinity (Persistence) works by tracking the source IP address of incoming packets to ensure a client stays connected to the same backend server. The " netmask " setting within the persistence profile determines the " granularity " of this tracking. A netmask tells the BIG-IP how many bits of the source IP address to ignore when creating the persistence record. For example, the current setting of 255.0.0.0 (a /8 mask) means the BIG-IP only looks at the first octet of the IP; this results in all users from the same large Class A network (e.g., everyone from 10.0.0.0 to 10.255.255.255) being persisted to the exact same server, which can lead to severe load imbalance.
To ensure that each unique IP address creates its own individual persistence record, the administrator must set the netmask to 255.255.255.255 (for IPv4). This is a " host mask " or /32, which instructs the BIG-IP to evaluate all 32 bits of the client ' s source IP address. With this setting, 10.1.1.1 and 10.1.1.2 will be treated as distinct entities and can be load balanced to different servers, each maintaining their own " stickiness " .
While Option A (255.255.255.0) would group users by their local subnet, only the full 255.255.255.255 mask satisfies the requirement for true unique-IP persistence. This configuration is standard for internet-facing applications where users arrive from diverse locations and the administrator wants to maintain the most granular and balanced distribution of traffic possible.
NEW QUESTION # 45
A BIG-IP Administrator configures an SSH pool with five members.
Which health monitor should be applied?
Answer: B
Explanation:
SSH is a TCP-based service. A TCP monitor validates service availability without requiring application-layer inspection.
NEW QUESTION # 46
A virtual server is configured to offload SSL from a pool of backend servers. When users connect to the virtual server, they successfully establish an SSL connection but no content is displayed. A packet trace performed on the server shows that the server receives and responds to the request. What should a BIG-IP Administrator do to resolve the problem? (Choose one answer)
Answer: A
Explanation:
This scenario describes a classic case of asymmetric routing in a "one-arm" or non-gateway deployment.
When a BIG-IP system is configured for SSL offloading, the following traffic flow occurs:
* Client-Side: The client establishes a successful SSL/TLS handshake with the Virtual Server. This explains why the user can "successfully establish an SSL connection."
* Server-Side: The BIG-IP decrypts the traffic and forwards it as plain HTTP to the backend server. The packet trace confirms the server receives the HTTP GET request and responds with the content.
* The Routing Failure: By default, the BIG-IP system preserves the client's original source IP address. If the backend server's default gateway is not the BIG-IP system (or if the server is on the same subnet as the client), the server will attempt to send the response directly back to the client's IP address, bypassing the BIG-IP.
* Stateful Drop: Because the BIG-IP is a Full Proxy, it expects the response to return through its own internal state table to be encrypted and sent back to the client. Since the response bypasses the BIG-IP, the BIG-IP connection eventually times out, and the client receives no data despite the server having sent it.
Solution (SNAT): Enabling Secure Network Address Translation (SNAT), specifically SNAT Auto Map, ensures that the BIG-IP replaces the client's source IP with its own internal self-IP before sending the request to the server. This forces the server to send the response back to the BIG-IP, allowing the BIG-IP to complete the transaction and deliver the content to the user.
NEW QUESTION # 47
Refer to the exhibit.
A BIG-IP Administrator creates a new Virtual Server to load balance SSH traffic. Users are unable to log on to the servers.
What should the BIG-IP Administrator do to resolve the issue? (Choose one answer)
Answer: D
Explanation:
SSH is a Layer 4 TCP-based protocol that operates on TCP port 22 and does not use HTTP in any capacity. In the exhibit, the Virtual Server is configured with an HTTP Profile applied, which is inappropriate for SSH traffic and causes connection failures.
According to the BIG-IP Administration: Data Plane Configuration documentation:
An HTTP profile must only be applied to Virtual Servers handling HTTP or HTTPS traffic.
When an HTTP profile is attached, BIG-IP expects HTTP headers and attempts to parse application-layer data.
Non-HTTP protocols such as SSH, FTP (control), SMTP, and other raw TCP services will fail if an HTTP profile is enabled.
Why the other options are incorrect:
A). Set Protocol to UDPSSH uses TCP, not UDP. Changing the protocol would break SSH entirely.
B). Set Source Address to 10.1.1.2The source address setting controls client access restrictions and is unrelated to protocol parsing issues.
C). Set Destination Address/Mask to 0.0.0.0/0The destination address is already valid for a specific SSH service and does not impact protocol handling.
Correct Resolution:
The BIG-IP Administrator should remove the HTTP Profile (set it to None) so the Virtual Server functions as a pure Layer 4 TCP service, allowing SSH connections to pass through successfully.
NEW QUESTION # 48
Where in the configuration utility should the BIG-IP Administrator verify the pool member currently assigned to a pool is on port 80?
Answer: B
Explanation:
The BIG-IP Configuration Utility (GUI) organizes information hierarchically to allow for granular management of application objects. A Pool is a collection of backend servers (pool members) that provide the same service. To verify the specific network parameters-such as the IP address and the service port-of the servers within a pool, the administrator must navigate to the specific pool's configuration.
The standard procedural path to verify this is Local Traffic > Pools: Pool List, where the administrator selects the specific pool name. Once inside the pool's configuration, the Members tab displays a list of all IP addresses and service ports associated with that pool. Under the "Service Port" column, the administrator can confirm if the member is listening on port 80 (HTTP).
Options A and B are incorrect for this specific verification task. While Nodes (Option A) show the health of a physical server, a node represents only an IP address and does not have a "Service Port" associated with it until it is defined as a pool member. Verifying the Health Monitor (Option B) would tell the administrator how the system is checking the member's status, but it does not definitively show the port on which the member is actually receiving application traffic. In a BIG-IP environment, a pool member is uniquely identified by the combination of its Node IP and its Service Port, and the Members tab is the primary interface for managing and auditing these specific member attributes.
NEW QUESTION # 49
......
Each format of the F5 Certification Exams not only offers updated exam questions but also additional benefits. A free trial of the BIG-IP Administration Data Plane Configuration (F5CAB3) exam dumps prep material before purchasing, up to 1 year of free updates, and a money-back guarantee according to terms and conditions are benefits of buying BIG-IP Administration Data Plane Configuration (F5CAB3) real questions today. A support team is also available 24/7 to answer any queries related to the BIG-IP Administration Data Plane Configuration (F5CAB3) exam dumps.
Reliable Exam F5CAB3 Pass4sure: https://www.exams-boost.com/F5CAB3-valid-materials.html
2026 Latest Exams-boost F5CAB3 PDF Dumps and F5CAB3 Exam Engine Free Share: https://drive.google.com/open?id=1iLp2M5JTrBpbhuzSVYGGCmpg_wwW883O