Lab JN0-364 Questions | JN0-364 Reliable Test Testking

P.S. Free & New JN0-364 dumps are available on Google Drive shared by ValidExam: https://drive.google.com/open?id=1HiekB85GlZxVFefTGJHwxlfegOB5wTlM

As the old saying goes people change with the times. People must constantly update their stocks of knowledge and improve their practical ability. Passing the test JN0-364 certification can help you achieve that and buying our JN0-364 study materials can help you pass the test smoothly. Our JN0-364 Study Materials are superior to other same kinds of study materials in many aspects. Our products’ test bank covers the entire syllabus of the test and all the possible questions which may appear in the test. Each question and answer has been verified by the industry experts.

Juniper JN0-364 Exam Syllabus Topics:

SectionObjectives
Multiprotocol Label Switching (MPLS)- Demonstrate knowledge of how to configure, monitor, or troubleshoot MPLS
  • 1. LDP-signaled Label-Switched Paths (LSPs)
  • 2. RSVP-signaled Label-Switched Paths (LSPs)
  • 3. MPLS forwarding
  • 4. Shortest path segment-routing LSPs
- Identify the concepts, operation, or functionality of MPLS CoS processing on Junos devices
  • 1. LDP
  • 2. RSVP
  • 3. End-to-end packet flow and forwarding
  • 4. MPLS and routing tables
  • 5. MPLS packet header
  • 6. MPLS terminology
  • 7. Segment routing with MPLS
  • 8. Labels and the label information base
Protocol-Independent Routing- Demonstrate knowledge of how to configure, monitor, or troubleshoot various protocol-independent routing components
  • 1. Load balancing
  • 2. Filter-based forwarding
  • 3. Static, aggregate, and generated routes
- Identify the concepts, operation, or functionality of various protocol-independent routing components
  • 1. Load balancing
  • 2. Routing instances, including routing information base (RIB) (also known as routing table) group
  • 3. Filter-based forwarding
  • 4. Martian addresses
  • 5. Static, aggregate, and generated routes
Spanning Tree Protocols- Identify the concepts, operation, or functionality of STP
  • 1. VSTP
  • 2. MSTP
  • 3. STP
  • 4. RSTP
- Demonstrate knowledge of how to configure, monitor, or troubleshoot Spanning Tree Protocols
  • 1. VSTP
  • 2. MSTP
  • 3. STP
  • 4. RSTP
IPv6- Identify the concepts, operation, or functionality of IPv6
  • 1. IPv6 over IPv4 tunneling
  • 2. Static routes
  • 3. Dynamic routing - OSPFv3, IS-IS, BGP
- Demonstrate knowledge of how to configure, monitor, or troubleshoot IPv6
Layer 2 Bridging or VLANs- Identify the concepts, operation, or functionality of Layer 2 bridging for the Junos OS
  • 1. Frame processing
  • 2. Virtual Switches
  • 3. Bridging elements and terminology
  • 4. Provider bridging (Q-in-Q tunneling)
  • 5. Service provider switching platforms
- Demonstrate knowledge of how to configure, monitor, or troubleshoot Layer 2 bridging or VLANs
  • 1. Interfaces and ports
  • 2. VLANs
  • 3. IRB
  • 4. Provider bridging
- Identify the concepts, benefits, or functionality of VLANs
  • 1. Integrated Routing and Bridging (IRB)
  • 2. Tagging
  • 3. Port modes
Open Shortest Path First (OSPF)- Demonstrate knowledge of how to configure, monitor, or troubleshoot OSPF
  • 1. Routing policy application
  • 2. Troubleshooting tools
  • 3. Interfaces and neighbor
- Identify the concepts, operation, or functionality of OSPF
  • 1. Link-state database
  • 2. Designated router and backup designated router
  • 3. Link-state advertisement (LSA) packet type
  • 4. OSPF area and router types
  • 5. Adjacencies and neighbors
  • 6. Router ID
  • 7. OSPF packet types
Border Gateway Protocol (BGP)- Demonstrate knowledge of how to configure, monitor, or troubleshoot BGP
  • 1. Routing policy application
  • 2. Troubleshooting tools
  • 3. Peers and peer groups
- Identify the concepts, operation, or functionality of BGP
  • 1. IBGP and EBGP functionality and interaction
  • 2. Route selection process
  • 3. Attributes
  • 4. BGP basic operation
  • 5. BGP message types
  • 6. BGP route reflection and confederations
Intermediate System to Intermediate System (IS-IS)- Demonstrate knowledge of how to configure, monitor, or troubleshoot IS-IS
  • 1. Routing policy application
  • 2. Interfaces and adjacencies
  • 3. Troubleshooting tools
- Identify the concepts, operation, or functionality of IS-IS
  • 1. Link-state database
  • 2. Designated intermediate system (DIS)
  • 3. Type, length, values (TLVs)
  • 4. Adjacencies and neighbors
  • 5. IS-IS protocol data units (PDUs)
  • 6. Metrics
  • 7. Levels and areas

>> Lab JN0-364 Questions <<

Pass-Sure Lab JN0-364 Questions & Perfect JN0-364 Reliable Test Testking & Updated Useful JN0-364 Dumps

Love is precious and the price of freedom is higher. Do you think that learning day and night has deprived you of your freedom? Then let Our JN0-364 Guide tests free you from the depths of pain. Our study material is a high-quality product launched by the ValidExam platform. And the purpose of our study material is to allow students to pass the professional qualification exams that they hope to see with the least amount of time and effort.

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q10-Q15):

NEW QUESTION # 10
What is a key differentiator of generate routes from aggregate routes?

Answer: D

Explanation:
Generated routes are a type of route that can be created to summarize and generate more specific routes within the routing table. Unlike aggregate routes, which summarize existing routes and inherit a next-hop, generated routes do not necessarily have to match an existing route and will have a next- hop of reject by default unless specified otherwise.


NEW QUESTION # 11
Exhibit:

Referring to the exhibit, why is the ge-0/0/0.0 interface shown as belonging to Level 3?

Answer: C

Explanation:
In theIS-IS (Intermediate System to Intermediate System)protocol as implemented in Junos OS, the output of operational commands uses specific numerical representations to denote the hierarchy levels of a neighbor adjacency. Understanding these values is crucial for troubleshooting peering relationships in a multi-level IS- IS network.
According to Juniper Networks technical documentation, the show isis adjacency command displays the status of the neighbors. The "L" column indicates the level of the adjacency:
* Level 1:Indicates the adjacency is strictly for intra-area routing.
* Level 2:Indicates the adjacency is strictly for backbone/inter-area routing.
* Level 3:This is ashorthand representationused by Junos to indicate that a single adjacency has been established forboth Level 1 and Level 2 simultaneously.
The critical distinction in this question lies in the interface type. On abroadcast interface(such as standard Ethernet), IS-IS typically establishes and maintains separate adjacencies for Level 1 and Level 2. In the CLI output for a broadcast link, you would generally see two separate lines for the same neighbor-one for Level
1 and one for Level 2.
However, on apoint-to-point (P2P)interface, IS-IS can negotiate both levels within a single adjacency. When this occurs, Junos consolidates the output into a single entry and usesLevel 3to signify that the adjacency is functional for both levels. Since the exhibit shows ge-0/0/0.0 as Level 3, it confirms that the link is configured with a point-to-point encapsulation (either natively or via the interface-type p2p command) and is acting as a Level 1/2 adjacency.
Option B is incorrect as the number "3" refers to protocol levels, not the count of neighbors. Option C is a reference to data center architectures that does not influence IS-IS level nomenclature. Option D is incorrect because, as noted, broadcast interfaces display these levels separately rather than using the Level 3 shorthand.


NEW QUESTION # 12
What are two types of BGP messages exchanged while in the Established state? (Choose two.)

Answer: A,C

Explanation:
Update messages are exchanged between BGP peers in the Established state to advertise new routes, withdraw previously advertised routes, and share path attributes for reachable prefixes.
Notification messages are used to signal errors detected in the BGP session and immediately terminate the session when a protocol error occurs.


NEW QUESTION # 13
In an OSPF network, what is a purpose of a designated router?

Answer: A

Explanation:
On multi-access network segments, such asEthernet, OSPF could potentially face a scalability issue. If every router on a segment formed a full adjacency with every other router, the number of adjacencies would follow the formula $n(n-1)/2$. In a segment with 10 routers, this would result in 45 adjacencies, each generating redundant flooding of Link-State Advertisements (LSAs) and excessive Hello traffic.
To solve this, OSPF elects aDesignated Router (DR)and aBackup Designated Router (BDR). According to Juniper Networks documentation, the primary purpose of the DR is to act as a central point of contact for the segment, therebyreducing OSPF traffic (Option C).
Instead of every router syncing with every other router, they all form aFull adjacencyonly with the DR and BDR. When a router (a DR-Other) has an update, it sends it to the multicast address224.0.0.6(All DR Routers). The DR then acknowledges the update and floods it to all other routers on the segment using the multicast address224.0.0.5(All OSPF Routers). This "hub-and-spoke" signaling model within the local segment significantly minimizes the bandwidth consumed by protocol overhead and reduces the CPU load on the participating routers.
It is important to note that the DR's scope is limited to the local segment; it does not "assign IDs" (Option A) nor does it flood routes to the "entire domain" (Option D), as that is the responsibility of individual routers within their respective areas.


NEW QUESTION # 14
Which feature allows Junos OS to perform recursive lookups for static route next hops?

Answer: A

Explanation:
The resolve option enables recursive next-hop resolution for static routes in Junos OS. When configured, the router performs a lookup in the routing table to determine how to reach the specified next-hop address, allowing the next hop to be resolved through another route instead of requiring it to be directly connected.


NEW QUESTION # 15
......

We know that you care about your JN0-364 actual test. Do you want to take a chance of passing your JN0-364 actual test? Now, take the JN0-364 practice test to assess your skills and focus on your studying. Firstly, download our JN0-364 free pdf for a try now. With the try, you can get a sneak preview of what to expect in the JN0-364 Actual Test. That JN0-364 test engine simulates a real, timed testing situation will help you prepare well for the real test.

JN0-364 Reliable Test Testking: https://www.validexam.com/JN0-364-latest-dumps.html

BONUS!!! Download part of ValidExam JN0-364 dumps for free: https://drive.google.com/open?id=1HiekB85GlZxVFefTGJHwxlfegOB5wTlM