JN0-364 Deutsch Prüfungsfragen, JN0-364 PDF Demo

Außerdem sind jetzt einige Teile dieser DeutschPrüfung JN0-364 Prüfungsfragen kostenlos erhältlich: https://drive.google.com/open?id=18P4KEv491L2Fzr3ZW9ZWhOpM2Fspq3zk

Einige Websites bieten auch die neuesten Lernmaterialien zur Juniper JN0-364 Prüfung im Internet. Aber sie haben keine zuverlässigen Garatie. Ich würde hier sagen, dass DeutschPrüfung einen Grundwert hat. Alle Juniper-Prüfungen sind sehr wichtig. Im Zeitalter der rasanten entwickelten Informationstechnologie ist DeutschPrüfung nur eine von den vielen. Warum wählen die meisten Menschen DeutschPrüfung? Dies liegt darin, die von DeutschPrüfung gebotenen Prüfungsfragen und Antworten wird Sie sicherlich in die Lage bringen, das Exam zu bestehen. wieso? Weil es die neuerlich aktualisierten Materialien bietet. Diese haben die Mehrheit der Kandidaten schon bewiesen.

Juniper JN0-364 Exam Syllabus Topics:

Section	Objectives
Topic 1: Troubleshooting and Operations	- Network troubleshooting methodology 1. Protocol verification tools 2. Junos operational commands - Performance and monitoring 1. System logging and alarms 2. Traffic analysis basics
Topic 2: OSPF and IS-IS Routing Protocols	- OSPF configuration and troubleshooting 1. Adjacency and neighbor states 2. Areas and LSAs - IS-IS operation in service provider networks 1. Levels and routing hierarchy 2. LSP and SPF calculation
Topic 3: MPLS and Service Provider Technologies	- VPN services 1. Layer 2 VPN overview 2. Layer 3 VPN concepts - MPLS fundamentals 1. Label switching and forwarding 2. LDP operations
Topic 4: Service Provider Architecture & Junos Fundamentals	- Junos OS routing fundamentals 1. Junos CLI and configuration hierarchy 2. Routing table and forwarding concepts - Service provider network design basics 1. Scalability considerations 2. Core, edge, and access architecture
Topic 5: BGP and Routing Policy	- Routing policy control 1. Route filtering and manipulation 2. Import/export policies - BGP fundamentals 1. Attributes and path selection 2. eBGP and iBGP operations

>> JN0-364 Deutsch Prüfungsfragen <<

JN0-364 PDF Demo, JN0-364 Prüfungsvorbereitung

Die Schwierigkeiten können den Charakter eines Menschen testen. Eine schlechte Situation kann die Aufrichtigkeit eines Menschen zeigen. Wenn man einer schlechten Situation gegenüberstehen, können nur die mutigen es gant leichtnehmen. Sind Sie ein mutiger Mensch? Wenn Sie sich nicht so gut auf Ihre Prüfung vorbereiten, können Sie es noch leichtnehmen. Weil Sie die Fragenkataloge zur Juniper JN0-364 Prüfung von DeutschPrüfung haben. Und eine Juniper JN0-364 Prüfung wird Sie nicht niederschlagen.

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) JN0-364 Prüfungsfragen mit Lösungen (Q84-Q89):

84. Frage
Click the Exhibit button.

Which destination IP address will be matched by the aggregate route shown in the exhibit?

A. packets destined to 10.16.1.214
B. packets destined to 10.16.4.183
C. packets destined to 10.16.0.4
D. packets destined to 10.16.3.79

Antwort: D

Begründung:
The aggregate route is 10.16.2.0/23. A /23 prefix covers the address range from 10.16.2.0 through 10.16.3.255. Therefore, any destination within that range will match the aggregate route.
The address 10.16.3.79 falls within this range, so packets destined for that address match the aggregate route.

85. Frage
Click the Exhibit button. You have a network often routers that have all been configured with an identical SRGB. The exhibit shows the IS-IS configuration from a router called R10. The other nine routers do not yet have an IPv4 shortest-path SR-MPLS LSP to this router.
Which missing part of the configuration must you add on R10 to solve this problem?

A. R10 must be configured with an explicit IPv4 node SID.
B. R10 must tag its internal IPv4 BGP prefixes with a BGP prefix SID
C. R10 must be configured with an explicit binding SID.
D. R10 must be configured with explicit IPv4 adjacency SID.

Antwort: A

Begründung:
For other routers to build an IPv4 shortest-path SR-MPLS LSP to R10, R10 must advertise a reachable SR node segment for its IPv4 loopback/prefix. Configuring an explicit IPv4 node SID ensures R10's loopback prefix is associated with a SID in the SRGB and is advertised in IS-IS, allowing the rest of the network to compute and label-switch traffic to R10 using SR.

86. Frage
Referring to the exhibit. Which two statements are correct about the information shown in the exhibit? (Choose two.)

A. The root bridge is reachable using the ge-0/0/14 interface.
B. This switch is the root bridge for this spanning tree topology.
C. The root bridge's priority Is 4k.
D. This switch has a bridge priority of 8k.

Antwort: A,D

Begründung:
The exhibit shows the output of the command show spanning-tree bridge, which provides information about the spanning tree status of the switch. From the output, we can see that the switch has a bridge ID different from the root ID, which implies that this switch is not the root bridge. The "Topology change initiator" field shows ge-0/0/14, which indicates that the last topology change occurred on this interface, and this is also the interface used to reach the root bridge.

87. Frage
Which two statements ate correct about the BGP next-hop attribute value? (Choose two.)

A. By default, the next-hop value is changed across EBGP links.
B. By default, the next-hop value is not changed across EBGP links.
C. By default, the next-hop value is not changed across IBGP links.
D. By default, the next-hop value is changed across IBGP links.

Antwort: A,C

Begründung:
By default, the router that originally sourced the route into BGP places its peer address into the attribute field. The next-hop value is then typically changed when the route is transmitted across external gGP (EBGP) links. Internal BGP (IBGP) peers do not alter the next-hop value between themselves.

88. Frage
What is the default export behavior of IS-IS in the Junos OS?

A. to export only IPv6 routes
B. to export only external routes
C. to export all learned prefixes
D. to export nothing

Antwort: D

Begründung:
In the Junos OS, routing policy behavior is governed bydefault import and export rulesthat vary significantly between different protocols. ForIS-IS (Intermediate System to Intermediate System), the default export policy is "reject all." This means that, by default, an IS-IS process willexport nothingfrom the routing table into the IS-IS database.
According to Juniper Networks technical documentation, IS-IS automatically advertises its own direct interfaces that are configured under the [edit protocols isis] hierarchy. However, it does not automatically redistribute routes learned from other sources-such asStatic routes,OSPF, orBGP-into the IS-IS domain.
This is a safety mechanism designed to prevent accidental routing loops or the flooding of unnecessary prefixes into the link-state database (LSDB), which could impact the stability of the SPF (Shortest Path First) algorithm.
To move routes from the routing table (inet.0) into IS-IS, an administrator must explicitly create arouting policyand apply it as anexport policywithin the IS-IS configuration. For example:
Code snippet
set policy-options policy-statement REDIST-STATIC term 1 from protocol static set policy-options policy-statement REDIST-STATIC term 1 then accept set protocols isis export REDIST-STATIC Without such a policy, the IS-IS LSPs (Link-State PDUs) will only contain information about the IS-IS enabled interfaces and the reachability of other IS-IS neighbors. This behavior contrasts with protocols like BGP, which has different default rules for exporting active BGP routes to EBGP peers. In the context of IS-IS in a Juniper environment, "export nothing" is the standard operational baseline.

89. Frage
......

JN0-364 PDF Demo: https://www.deutschpruefung.com/JN0-364-deutsch-pruefungsfragen.html

Übrigens, Sie können die vollständige Version der DeutschPrüfung JN0-364 Prüfungsfragen aus dem Cloud-Speicher herunterladen: https://drive.google.com/open?id=18P4KEv491L2Fzr3ZW9ZWhOpM2Fspq3zk