P.S. Free & New EDGE-Expert dumps are available on Google Drive shared by PassLeaderVCE: https://drive.google.com/open?id=1JibdUuJW2W0vizk4T_b9wx58bjrAlrnc
Do you have registered for EDGE EDGE-Expert exam? With the drawing near of the examination, I still lack of confidence to pass EDGE-Expert test. Then I have not enough time to read reference books. About the above problem, how should I do? Is there shortcut to pass the exam? Do you have such a mood like that, now? There is no need for hurry. Even if the examination time is near, you are also given the opportunity to prepare for EDGE-Expert Certification test. And what is the opportunity? It is PassLeaderVCE EDGE-Expert dumps which is the most effective materials and can help you prepare for the exam in a short period of time. What's more, PassLeaderVCE practice test materials have a high hit rate. 100% satisfaction guarantee! As well as you memorize these questions and answers in our dumps, you must pass EDGE EDGE-Expert certification.
| Section | Weight | Objectives |
|---|---|---|
| Energy Efficiency | 25% | - HVAC Systems
|
| Water Efficiency & Materials | 25% | - Materials Embodied Energy (EE)
|
| Financial & Results Analysis | 10% | - Results and outputs of EDGE
|
| Software & Methodology | 25% | - Climate Zones & Weather Data
|
| EDGE System Overview | 15% | - Understanding the EDGE Standard
|
Therefore, you have the option to use EDGE EDGE-Expert PDF questions anywhere and anytime. PassLeaderVCE Excellence in Design for Greater Efficiencies (EDGE Expert) Exam (EDGE-Expert) dumps are designed according to the EDGE EDGE-Expert certification exam standard and have hundreds of questions similar to the actual Excellence in Design for Greater Efficiencies (EDGE Expert) Exam (EDGE-Expert) exam. Excellence in Design for Greater Efficiencies (EDGE Expert) Exam (EDGE-Expert) web-based practice exam software also works without installation.
NEW QUESTION # 47
Other than embodied carbon, the selection of wall materials has an impact on
Answer: D
Explanation:
Within the CBCI EDGE curriculum, wall material selection affects not only embodied carbon under the materials category but also operational energy performance. The thermal properties of wall assemblies, including U-value, thermal mass, conductivity, and insulation levels, directly influence the building's heat transfer characteristics. These factors determine how much heat enters or escapes through the building envelope, thereby affecting cooling and heating loads.
When wall materials provide improved insulation or higher thermal mass, they reduce unwanted heat gains in hot climates and heat losses in cooler climates. This results in lower energy demand for HVAC systems. In the EDGE software, envelope performance improvements are reflected in the energy calculations under the improved case scenario, contributing to overall percentage energy savings.
Window to Wall Ratio is a geometric design parameter and is not determined by wall material choice. Internal heat gains are primarily influenced by occupants, lighting, and equipment rather than wall composition. Solar Heat Gain Coefficient refers specifically to glazing performance, not opaque wall materials. Therefore, aside from embodied carbon impacts, wall material selection most directly affects the building's energy consumption.
NEW QUESTION # 48
What will reduce the hot water demand in a hotel building?
Answer: B,C,D
Explanation:
Reducing hot water demand in hotels is a key green building strategy in EDGE, focusing on both supply-side and demand-side measures. The EDGE User Guide details measures that reduce hot water demand: "Hot water demand in hotels can be reduced through supply-side measures like solar water heating and heat pumps for hot water, which decrease the energy needed to heat water, and demand-side measures like low-flow shower heads, which reduce the volume of hot water used" (EDGE User Guide, Section 5.2: Water Efficiency Measures, Section 4.2: Energy Efficiency Measures). Option B (solar water heating) reduces hot water demand by providing a renewable heat source, thus lowering energy use for heating. Option C (low-flow shower heads) directly reduces the volume of hot water used by limiting flow rates: "Low-flow shower heads can reduce hot water consumption by up to 30% in hotels" (EDGE Methodology Report Version 2.0, Section
4.2: Water Savings Calculations). Option D (heat pumps for hot water) reduces energy demand for heating water by using a more efficient system: "Heat pumps for hot water have a high COP, reducing the energy required to meet hot water demand" (EDGE User Guide, Section 4.2: Energy Efficiency Measures). Option A (solar photovoltaics) generates electricity, not hot water, and does not directly reduce hot water demand:
"Solar PVs contribute to electricity generation, not hot water production" (EDGE Methodology Report Version 2.0, Section 5.3: Energy Measures). Thus, Options B, C, and D all reduce hot water demand in a hotel.
Reference:EDGE User Guide Version 2.1, Section 5.2: Water Efficiency Measures, Section 4.2: Energy Efficiency Measures; EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations, Section 5.3: Energy Measures.
NEW QUESTION # 49
Who is responsible for paying the EDGE certification fees?
Answer: C
Explanation:
The EDGE certification process involves various fees, including registration and certification fees, and assigns clear responsibility for their payment. The EDGE Certification Protocol explicitly states: "The EDGE Client, typically the project owner or developer, is responsible for paying the EDGE certification fees, which include the registration fee to enter the project into the system and the certification fee upon successful completion of the audit process. These fees are paid to the EDGE Certification Provider to cover the costs of certification" (EDGE Certification Protocol, Section 2.1: Registration). Option B, EDGE Client, directly aligns with this responsibility, as the Client is the party seeking certification and thus bears the financial obligation. Option A (EDGE Expert) is incorrect, as the Expert provides consultancy services and is typically paid by the Client, not responsible for certification fees: "The EDGE Expert may assist with the certification process, but the Client is responsible for all fees associated with registration and certification" (EDGE Expert and Auditor Protocols, Section 2.1: Roles of EDGE Expert). Option C (EDGE Operations and Management Team) is also incorrect, as this team oversees the EDGE program, not individual project fees: "The EDGE Operations and Management Team manages the program at a global level and does not handle or pay project- specific certification fees" (EDGE Certification Protocol, Section 1.3: Program Structure). Option D (Local Green Building Council) may act as a Certification Provider in some regions, but they receive the fees, not pay them: "Local Green Building Councils, such as those partnered with GBCI, may serve as Certification Providers, but the payment of fees is the responsibility of the Client, not the Council" (EDGE User Guide, Section 6.1: Project Preparation). The EDGE User Guide further reinforces: "The Client must budget for andpay all EDGE certification fees, ensuring timely payment to the Certification Provider to avoid delays in the certification process" (EDGE User Guide, Section 6.1: Project Preparation). The EDGE Certification Protocol adds: "Certification fees are typically invoiced by the Certification Provider, such as GBCI, and must be settled by the Client to receive the final EDGE certificate" (EDGE Certification Protocol, Section 3.3:
Certification Decision). Thus, the EDGE Client (Option B) is responsible for paying the certification fees.
Reference:EDGE Certification Protocol, Section 2.1: Registration, Section 1.3: Program Structure, Section
3.3: Certification Decision; EDGE Expert and Auditor Protocols, Section 2.1: Roles of EDGE Expert; EDGE User Guide Version 2.1, Section 6.1: Project Preparation.
NEW QUESTION # 50
Utility cost savings are calculated based on reduction in total:
Answer: C
Explanation:
Utility cost savings in EDGE are calculated based on reductions in resource consumption sourced from the supply grid, as these are the costs directly borne by the building owner. The EDGE User Guide explains:
"Utility cost savings in EDGE are calculated based on the reduction in energy and water consumption from the supply grid, using local tariffs for electricity and water to convert resource savings into financial savings" (EDGE User Guide, Section 2.4: Interpreting EDGE Results). Option D, energy and water consumption from the supply grid, aligns with this definition, focusing on grid-supplied resources. Option A (electricity and water consumption) is partially correct but lacks specificity about the source: "Electricity and water must be grid-supplied to be included in utility cost savings; onsite generation is excluded" (EDGE Methodology Report Version 2.0, Section 4.4: Cost Savings Calculations). Option B (generator fuel and water consumption) is incorrect, as generator fuel is not part of utility cost savings: "Generator fuel costs are not included in utility savings, as EDGE focuses on grid-supplied utilities" (EDGE User Guide, Section 2.4:
Interpreting EDGE Results). Option C (building energy and water consumption) is too broad, including onsite sources: "Building consumption includes all sources, but utility savings are grid-specific" (EDGE Methodology Report Version 2.0, Section 4.4: Cost Savings Calculations). Thus, energy and water from the supply grid (Option D) is the correct basis for utility cost savings.
Reference: EDGE User Guide Version 2.1, Section 2.4: Interpreting EDGE Results; EDGE Methodology Report Version 2.0, Section 4.4: Cost Savings Calculations.
NEW QUESTION # 51
What or who determines the baseline assumptions in EDGE?
Answer: D
Explanation:
The baseline assumptions in EDGE software, known as the Base Case, are critical for calculating resource savings and are determined using standardized data. The EDGE Methodology Report explains: "Baseline assumptions in EDGE, referred to as the Base Case, are determined by market surveys of typical construction practices in the project's country, reflecting common materials, systems, and design practices for the selected typology and location" (EDGE Methodology Report Version 2.0, Section 3.1: Base Case Determination).
Option C, market survey of typical construction practices, aligns with this methodology. Option A (EDGE software users) is incorrect, as users do not set the baseline; they input project-specific data. Option B (EDGE Auditors) is also incorrect, as auditors verify compliance, not establish baselines. Option D (market survey of best construction practices) is wrong because EDGE uses typical practices, not best practices, to create a realistic benchmark, as clarified in the EDGE User Guide: "The Base Case reflects typical local practices, not best practices, to ensure a fair comparison for resource savings" (EDGE User Guide, Section 2.3: Using the EDGE App).
Reference:EDGE Methodology Report Version 2.0, Section 3.1: Base Case Determination; EDGE User Guide Version 2.1, Section 2.3: Using the EDGE App.
NEW QUESTION # 52
......
Do you want to use your spare time to get EDGE-Expert exam certification? The PDF version of our EDGE-Expert exam materials provided by us can let you can read anytime and anywhere. We also provide online version and the software version. The content of different version is diverse, and every of them have their own advantages. You can download the version of the EDGE-Expert Exam Materials to try and find the version that satisfies you.
Latest EDGE-Expert Exam Dumps: https://www.passleadervce.com/GBCI-EDGE/reliable-EDGE-Expert-exam-learning-guide.html
What's more, part of that PassLeaderVCE EDGE-Expert dumps now are free: https://drive.google.com/open?id=1JibdUuJW2W0vizk4T_b9wx58bjrAlrnc