PassTIP H12-893_V1.0 최신 PDF 버전 시험 문제집을 무료로 Google Drive에서 다운로드하세요: https://drive.google.com/open?id=196VEmfrgFrpU4MY-nWd6dYYWhnljqxRS
Huawei H12-893_V1.0 시험을 어떻게 통과할수 있을가 고민중이신 분들은PassTIP를 선택해 주세요. PassTIP는 많은 분들이 IT인증시험을 응시하여 성공하도록 도와주는 사이트입니다. 최고급 품질의Huawei H12-893_V1.0시험대비 덤프는Huawei H12-893_V1.0시험을 간단하게 패스하도록 힘이 되어드립니다. PassTIP 의 덤프는 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다.
| 주제 | 소개 |
|---|---|
| 주제 1 |
|
| 주제 2 |
|
| 주제 3 |
|
| 주제 4 |
|
| 주제 5 |
|
| 주제 6 |
|
>> Huawei H12-893_V1.0완벽한 덤프문제 <<
IT전문가들이 자신만의 경험과 끊임없는 노력으로 만든 최고의Huawei H12-893_V1.0학습자료---- PassTIP의 Huawei H12-893_V1.0덤프! Huawei H12-893_V1.0덤프로 시험보시면 시험패스는 더는 어려운 일이 아닙니다. 사이트에서 데모를 다운받아 보시면 덤프의 일부분 문제를 먼저 풀어보실수 있습니다.구매후 덤프가 업데이트되면 업데이트버전을 무료로 드립니다.
질문 # 58
An enterprise builds a DC and deploys iMaster NCE-Fabric to automatically deliver network configurations. After the engineer manually deploys the underlay network and delivers overlay network configurations through iMaster NCE-Fabric, it is found that tenant hosts cannot access external networks. Which of the following is not a possible cause of this fault?
정답：B
설명：
In Huawei's CloudFabric Solution, iMaster NCE-Fabric automates overlay network (e.g., VXLAN) configuration, while the underlay network is manually deployed. Tenant hosts failing to access external networks indicate a connectivity issue, likely at the overlay-underlay boundary or security layer. Let's evaluate each option as a possible cause:
A . No return route is configured on the PE: This is a possible cause. The Provider Edge (PE) device (e.g., border leaf or router) must have a return route to the tenant's VXLAN network for external access. Without it, traffic from external networks cannot reach the DC. POSSIBLE CAUSE.
B . The engineer did not check whether the service loopback interface needs to be configured on the VXLAN network based on the switch model: This is a possible cause. Some Huawei switch models (e.g., CE series) require a service loopback interface as the VTEP source IP. If omitted or misconfigured based on the model, external connectivity fails. POSSIBLE CAUSE.
C . No firewall security policy is configured when host traffic passes through the firewall: This is a possible cause. If a firewall is in the path (e.g., between tenant VPC and external network), a missing security policy (e.g., allowing outbound traffic) blocks access. POSSIBLE CAUSE.
D . The MAC address of the NVE interface on the VXLAN network is not manually specified: This is not a possible cause. The Network Virtualization Edge (NVE) interface in VXLAN does not require a manually specified MAC address; it uses the switch's system MAC or auto-generates one. iMaster NCE-Fabric typically handles this automatically, and manual specification is neither required nor a common fault point for external access issues. NOT A POSSIBLE CAUSE.
Thus, D is not a possible cause of the fault.
질문 # 59
In Huawei CloudFabric Solution, OSPF or BGP can be used on the underlay network of a DC.
정답：B
설명：
In Huawei's CloudFabric Solution, the underlay network provides the physical infrastructure for VXLAN overlays. Both OSPF (Open Shortest Path First) and BGP (Border Gateway Protocol) are supported routing protocols:
OSPF: Suitable for smaller to medium-sized DCNs, offering fast convergence and simplicity.
BGP: Preferred for large-scale DCNs, providing scalability and multi-tenancy support (e.g., EBGP for inter-AS or iBGP for intra-DC).
Huawei documentation confirms flexibility in choosing OSPF or BGP based on network size and requirements. The statement is TRUE (A).
질문 # 60
Which of the following statements is false about VXLAN tunnel establishment?
정답：D
설명：
VXLAN (Virtual Extensible LAN) tunnels are used to encapsulate Layer 2 traffic over a Layer 3 network, a key component in Huawei's CloudFabric data center solutions. Let's evaluate each statement:
A). A VXLAN tunnel is identified by a pair of VTEPs: This is true. A VXLAN tunnel is identified by the pair of VXLAN Tunnel Endpoint (VTEP) IP addresses (local and remote), along with the VNI (VXLAN Network Identifier). This ensures unique tunnel identification. TRUE.
B). After a tunnel is established, if one end of the tunnel goes Down, the other end may not go Down:
This is true. VXLAN tunnels are unidirectional, and the status of one end does not automatically affect the other unless the underlay network connectivity (e.g., Layer 3 reachability) is lost. The remote VTEP may remain operational if it can still encapsulate/decapsulate traffic. TRUE.
C). For a static tunnel, you need to manually configure the local and remote VNIs: This is true. In a static VXLAN tunnel, administrators must manually configure the VNI and VTEP IP addresses on both ends, as there is no dynamic control plane (e.g., BGP EVPN) to automate the process.
TRUE.
D). Dynamic tunnels depend on EVPN Type 5 routes to transmit information: This is false.
Dynamic VXLAN tunnels rely on BGP EVPN as the control plane, but Type 5 routes (IP Prefix routes) are specifically used for advertising host IP routes and external network routes, not for general tunnel establishment. Dynamic tunnel setup primarily uses Type 2 (MAC/IP Advertisement) and Type 3 (Multicast) routes to exchange VNI and VTEP information. Type 5 routes are relevant for Layer 3 routing, not the initial tunnel setup. FALSE.
Thus, D is the false statement because dynamic tunnels depend on EVPN Type 2 and Type 3 routes, not Type 5, for initial establishment.
질문 # 61
Which feature enables multiple physical interfaces between switches to operate as a single logical connection while providing redundancy and higher bandwidth?
정답：A
설명：
LACP aggregates several physical links into one logical interface, increasing bandwidth while providing redundancy. Traffic can continue across remaining links if one member fails, improving both availability and resource utilization.
질문 # 62
In the DCN architecture, spine nodes connect various network devices to the VXLAN network.
정답：B
설명：
In Huawei's Data Center Network (DCN) architecture, particularly with the CloudFabric solution, the spine-leaf topology is a common design for scalable and efficient data centers. VXLAN (Virtual Extensible LAN) is used to create overlay networks, enabling large-scale multi-tenancy and flexible workload placement.
Spine Nodes' Role: In this architecture, spine nodes act as the backbone, interconnecting leaf nodes (which connect to servers, storage, or other endpoints) and facilitating high-speed, non-blocking communication. Spine nodes typically handle Layer 3 routing and serve as VXLAN tunnel endpoints (VTEPs) or connect to devices that do, integrating the physical underlay with the VXLAN overlay network.
Connection to VXLAN: Spine nodes ensure that traffic from various network devices (via leaf nodes) is routed efficiently across the VXLAN fabric. They provide the high-bandwidth, low-latency backbone required for east-west traffic in modern data centers, supporting VXLAN encapsulation and decapsulation indirectly or directly depending on the deployment.
Thus, the statement is TRUE (A) because spine nodes play a critical role in connecting the underlay network (various devices via leaf nodes) to the VXLAN overlay, as per Huawei's DCN design principles.
질문 # 63
......
경쟁율이 치열한 IT업계에서 아무런 목표없이 아무런 희망없이 무미건조한 생활을 하고 계시나요? 다른 사람들이 모두 취득하고 있는 자격증에 관심도 없는 분은 치열한 경쟁속에서 살아남기 어렵습니다. Huawei인증 H12-893_V1.0시험패스가 힘들다한들PassTIP덤프만 있으면 어려운 시험도 쉬워질수 밖에 없습니다. Huawei인증 H12-893_V1.0덤프에 있는 문제만 잘 이해하고 습득하신다면Huawei인증 H12-893_V1.0시험을 패스하여 자격증을 취득해 자신의 경쟁율을 업그레이드하여 경쟁시대에서 안전감을 보유할수 있습니다.
H12-893_V1.0인기자격증 덤프공부자료: https://www.passtip.net/H12-893_V1.0-pass-exam.html
PassTIP H12-893_V1.0 최신 PDF 버전 시험 문제집을 무료로 Google Drive에서 다운로드하세요: https://drive.google.com/open?id=196VEmfrgFrpU4MY-nWd6dYYWhnljqxRS