What's more, part of that PrepPDF NSEI_OTS_AR-7.6 dumps now are free: https://drive.google.com/open?id=1VHGyPOwncbQbNUwqKM23ctYX-TQWG7FW
PrepPDF's Fortinet NSEI_OTS_AR-7.6 exam training materials are the best training materials of all the Internet training resources. Our visibility is very high, which are results that obtained through many candidates who have used the PrepPDF's Fortinet NSEI_OTS_AR-7.6 exam training materials. If you also use PrepPDF's Fortinet NSEI_OTS_AR-7.6 Exam Training materials, we can give you 100% guarantee of success. If you do not pass the exam, we will refund the full purchase cost to you. For the vital interests of the majority of candidates, PrepPDF is absolutely trustworthy.
| Section | Objectives |
|---|---|
| Network Access Control | - Configure network segmentation schemas - Explain OT Ethernet concepts - Configure network access authentication |
| Monitoring and Risk Assessment | - Create FortiAnalyzer event handlers - Perform risk assessment and management - Analyze security reports from FortiAnalyzer |
| Network Security | - Configure virtual patching - Configure security inspections for industrial protocols - Configure automation |
| Asset Management | - Explain OT standards and Fortinet compliance - Implement device detection on FortiGate and FortiNAC - Use Fortinet Security Fabric for an OT network |
>> NSEI_OTS_AR-7.6 Trustworthy Exam Content <<
Solutions is commented PrepPDF to ace your Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) exam preparation and enable you to pass the final Fortinet NSEI_OTS_AR-7.6 exam with flying colors. To achieve this objective Exams. Solutions is offering updated, real, and error-free NSEI_OTS_AR-7.6 Certification Exam questions in three easy-to-use and compatible formats. These Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) exam questions formats will help you in preparation.
NEW QUESTION # 16
You want to automate some tasks in your OT network. Which three configurations are directly available in a new basic event handler on FortiAnalyzer? (Choose three answers)
Answer: A,C,E
Explanation:
According to the OT Security 7.6 Architect study guide regarding FortiAnalyzer Event Management :
* Notification Options : When configuring a new event handler, FortiAnalyzer provides several built-in notification methods to alert administrators when specific log criteria are met. The most common and direct method is Send alert email (Option A).
* Incident Management : To streamline the SOC workflow, an event handler can be configured to Automatically create an incident (Option D) based on the triggered event. This moves the event into the Incident Manager for further analysis.
* Security Fabric Integration : In the 7.6 architecture, event handlers can directly trigger an Automation stitch (Option E). This allows the FortiAnalyzer to notify the root FortiGate to take action (like running a CLI script or changing a policy) across the Security Fabric.
* Exclusions : Create a report (Option B) is typically a task performed by a Playbook or a scheduled report job, not a direct setting inside the basic event handler configuration. Quarantine an attacker (Option C) is an action that results from an automation stitch or playbook, but it is not a direct configuration toggle within the event handler itself.
NEW QUESTION # 17
Refer to the exhibit.
A simplified OT network is shown. You want to optimize the protection of this OT network. Which two controls must you implement? (Choose two answers)
Answer: A,D
Explanation:
The correct answers are B. IPS on FortiGate_Level5 and C. Virtual patching on FortiGate_Level2 .
The study guide explains that "the first line of defense is securing the IT side of your network" and that FortiGate should be placed to protect ICS environments and stop threats from propagating from IT into OT. It also states that IPS improves OT security because "today's threat landscape requires IPS to block a wider range of threats and improve OT security" and that in IPS mode, vulnerable devices are protected . This makes FortiGate_Level5 , at the upper boundary near the DMZ and external connectivity, the correct place to implement IPS as a primary protection control.
The study guide also states in the Purdue model section that "Level 2 consists of the processes and programs that control the PLCs, RTUs, and IEDs found at Level 1" and that "it is necessary to segment, or even microsegment, these servers with firewall segmentation, along with policies that include application control and virtual patching." In addition, the virtual patching section says "Virtual patching protects OT devices that have not yet been updated against vulnerability exploits" and applies when traffic related to the vulnerable device reaches the firewall policy. Since FortiGate_Level2 sits between the process network and the control network, it is the right enforcement point for virtual patching to protect the PLC-side assets.
Option A is not one of the best answers because offline IDS only detects and logs attacks; the guide says "no traffic flows through FortiGate" in offline IDS mode, whereas IPS can actually block threats. Option D is also not the best answer because OT signatures are enabled within the IPS framework, but the stronger control explicitly described for this design is to deploy IPS at the upper boundary and virtual patching closer to vulnerable OT devices .
NEW QUESTION # 18
Refer to the exhibit.
An industrial Ethernet protocol skipping layers 3 to 6 is shown. Which industrial Ethernet protocol is it?
(Choose one answer)
Answer: C
Explanation:
The correct answer is D. EtherCAT . The study guide explicitly states under the Ethernet/IP and EtherCAT section that "EtherCAT is a protocol that offers real-time communication in a primary-secondary configuration" and "EtherCAT skips layers 3 to 6 to deliver real-time communication." It also adds that
"the most important feature of this protocol is that secondary devices collect only the information they need from the data packets." This matches the exhibit exactly, where the diagram shows Real-Time Data above a Proprietary MAC and Proprietary physical layer , reflecting the protocol structure that bypasses the intermediate OSI layers.
The other options do not match this behavior. The guide says POWERLINK uses layer 2 and layer 7 of the OSI model, not that it skips layers 3 to 6. It also explains that Ethernet/IP is the industrial protocol based entirely on Ethernet standards and adapts to the OSI model. Modbus is described as an open client/server protocol and is not suitable for transmitting data in real time . Therefore, the protocol in the exhibit is clearly EtherCAT .
NEW QUESTION # 19
Refer to the exhibit.
A Run_report task is shown. You want to automate the generation of a newly created report on FortiAnalyzer . When you configure the Run_report task in Playbook, why is the report not shown in the Report field? (Choose two answers)
Answer: A,E
Explanation:
Based on the architecture of FortiAnalyzer within the Security Fabric and its automation capabilities:
* Automation Stitch and Reports : Within the Security Fabric environment, FortiAnalyzer serves as a key element in creating automation stitches and playbooks. For a report to be selectable within a Playbook task (such as the Run_report task shown in the exhibit), it must meet specific technical prerequisites in the report configuration.
* Auto-cache Requirement (Answer C) : For a report to be used for automated generation, it must be " ready " to be processed by the engine without manual intervention. Auto-cache must be enabled in the report settings to ensure the report can be generated dynamically and efficiently when triggered by the playbook.
* Extended Log Filtering (Answer B) : Playbooks often pass specific variables from the trigger (such as a specific device IP or a time range) into the report. For the report to accept these dynamic parameters and be visible as an " automation-compatible " report in the Playbook interface, Extended Log Filtering must be enabled.
* Workflow Constraints : Without these two settings enabled on the report itself, the Playbook engine cannot guarantee the report ' s successful generation or parameter injection, and thus filters it out of the available selection list in the Run_report task.
NEW QUESTION # 20
Refer to the exhibit.
Which statement about this partial Asset Identity List page is correct? (Choose one answer)
Answer: B
Explanation:
The correct answer is B. A firewall policy has a Virtual Patching security profile applied to it .
The decisive clue in the exhibit is the Vulnerabilities column showing KEVs and device-specific vulnerability counts. The study guide explains the virtual patching workflow in this exact way: "FortiGate performs a lookup for device-specific vulnerabilities and mitigation rules in FortiGuard," then
"FortiGuard returns specific OT virtual patching signatures," and "FortiGate caches the signatures and mitigation rules that apply to each device." That is the same behavior reflected by the Asset Identity List showing vulnerability information per detected device.
The guide then states that "When traffic related to the vulnerable device reaches FortiGate, the firewall policy with the virtual patching profile applies." It also says "A virtual patching profile can be applied to firewall policies in any direction, protecting traffic from or to the vulnerable OT device." This directly links the per-device vulnerability visibility to a Virtual Patching profile enforced through firewall policy.
The other options do not match the exhibit. Antivirus is not described in the study guide as building a device- by-device vulnerability list, Application Control is used for OT protocol and message visibility, and IPS focuses on exploit detection and prevention. The Vulnerabilities/KEVs display is the indicator that FortiGate is using Virtual Patching logic for those OT devices.
NEW QUESTION # 21
......
It can be said that our NSEI_OTS_AR-7.6 study materials are the most powerful in the market at present, not only because our company is leader of other companies, but also because we have loyal users. NSEI_OTS_AR-7.6 study materials are not only the domestic market, but also the international high-end market. We are studying some learning models suitable for high-end users. Our research materials have many advantages. Now, I will briefly introduce some details about our NSEI_OTS_AR-7.6 Study Materials for your reference.
Reliable NSEI_OTS_AR-7.6 Test Review: https://www.preppdf.com/Fortinet/NSEI_OTS_AR-7.6-prepaway-exam-dumps.html
DOWNLOAD the newest PrepPDF NSEI_OTS_AR-7.6 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1VHGyPOwncbQbNUwqKM23ctYX-TQWG7FW