Preparation should be convenient and authentic so that anyone, be it a working person or a student, can handle the load. But now I have to tell you that all of these can be achieved in our 350-101 exam preparation materials. The exam preparation materials of TrainingDump 350-101 are authentic and the way of the study is designed highly convenient. I don't think any other site can produce results that TrainingDump can get. That is why I would recommend it to all the candidates attempting the 350-101 Exam to use 350-101 exam preparation materials.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
>> 350-101 Valid Learning Materials <<
Cisco 350-101 exam include all the important concepts leaving behind the stories to tell for some other time. For the complete and quick Cisco 350-101 preparation the Cisco 350-101 Exam Questions are the best study material. With Cisco 350-101 Exam Practice test questions you can ace your Cisco 350-101 exam preparation simply and quickly to pass the final 350-101 exam easily.
NEW QUESTION # 102
A wireless engineer notices high retransmission rates on a WLAN supporting IoT devices operating at low data rates. Which configuration change is MOST appropriate?
Answer: C
Explanation:
Disabling extremely low data rates improves airtime efficiency and reduces retransmissions caused by slow clients occupying the channel excessively. However, engineers must verify device compatibility before removing legacy rates. DTIM and RADIUS settings are unrelated to RF retransmission optimization.
NEW QUESTION # 103
An engineer is migrating to a new Cisco Catalyst CW9800-H1 WLC to modernize the wireless infrastructure and enable advanced monitoring capabilities. The organization operates more than
150 access points and uses Cisco Catalyst Center for centralized network management and assurance. As part of the deployment, the engineer must enable wireless service assurance and wireless telemetry to monitor client connectivity, roaming behavior, and performance metrics across the wireless network. Which configuration must be applied in Cisco Catalyst Center when onboarding the WLC?
Answer: C
Explanation:
When onboarding a Cisco Catalyst CW9800-H1 WLC into Cisco Catalyst Center for enterprise- scale wireless monitoring, proper credential configuration and service enablement are critical.
Device controllability ensures that the Catalyst Center can communicate with and manage the WLC and its associated access points, while wireless assurance provides telemetry data for client connectivity, roaming, and performance metrics. The recommended approach is to enable CLI, SNMP, and NETCONF credentials during discovery to allow full management access. Enabling device controllability globally allows the Catalyst Center to push configurations and query device status without restriction. Assigning the WLC to a site with wireless assurance enabled activates telemetry data collection, ensuring detailed visibility into client behavior and network health.
NEW QUESTION # 104
An engineer must troubleshoot complex wireless performance issues in a large office which is using a Cisco
9176 AP. The engineer must analyze traffic patterns and identify potential sources of interference. The AP must capture all wireless frames in the air and send them to a remote protocol analyzer for detailed inspection.
Client connectivity is not required from the AP during the troubleshooting window. Which CLI command must the engineer use on the WLC to enable the required AP mode for this purpose?
Answer: A
Explanation:
For in-depth wireless troubleshooting using a Cisco 9176 AP, the correct operational mode is thesniffer mode.
This mode allows the AP to capture all RF frames, including management, control, and data frames, across all configured channels, and forward these to a remote protocol analyzer such as Wireshark. Sniffer mode is distinct from other AP modes because the AP does not serve clients in this state; its sole function is passive packet capture for analysis of interference, RF performance, and client behavior. The commandap name < ap_name > mode snifferexecuted on the WLC explicitly sets this mode.
Monitor mode (option A) is used to observe client behavior and RF environment, but it does not provide complete over-the-air packet capture. Local mode (option C) is the standard AP mode for client connectivity and normal CAPWAP operation. Rogue-detector mode (option D) is used to identify unauthorized APs and clients but does not capture traffic for external analysis.
Cisco documentation and technical guides for Catalyst APs clearly differentiate these modes, noting thatsniffer mode provides full frame capture without client services, making it ideal for troubleshooting complex wireless performance issues in high-density deployments. Reference topic:Wireless Network Operation - AP modes, sniffer mode configuration, RF troubleshooting, and protocol analyzer integration.
NEW QUESTION # 105
Refer to the exhibit. A network engineer is deploying a new Cisco 9800 WLC and is performing the Day-0 setup. The IP address and subnet mask have been assigned to the management interface, and network connectivity between the WLC and the upstream switch has been verified.
Which CLI command must the engineer use next to configure management access?
Answer: D
Explanation:
After assigning an IP address to the management interface of a Cisco 9800 WLC, the next step in Day-0 deployment is configuring the default route to ensure management traffic can reach devices outside the local subnet. The correct command is ip route 0.0.0.0 0.0.0.0 <gateway>, which establishes a default route for all traffic destined for networks not explicitly known in the routing table. In this case, ip route 0.0.0.0 0.0.0.0 10.1.10.1 sets the upstream router at 10.1.10.1 as the default gateway, allowing the WLC to communicate with the broader network for management and client services.
NEW QUESTION # 106
What is the purpose of YANG when used with the NETCONF protocol in the context of Cisco wireless controllers?
Answer: D
Explanation:
YANG (Yet Another Next Generation) is a data modeling language primarily used in conjunction with the NETCONF (Network Configuration Protocol) to model configuration and operational data for network devices, including Cisco wireless controllers. YANG is a human-readable, hierarchical language designed to define the structure of data, allowing for consistent representation of configuration parameters, operational state, and notifications. It is extensively used in network automation and management systems to ensure standardized configuration management across various devices, making it easier for network administrators to automate and configure network devices using NETCONF.
NETCONF is the protocol that facilitates the transport of these data models (defined in YANG) between network devices and management systems. YANG's role is to define the structure and constraints of the data that NETCONF will configure or retrieve from devices. This allows administrators to configure network devices programmatically while adhering to a standardized data structure, which is essential for scalability, automation, and integration across various systems.
Options B, C, and D do not describe the actual purpose of YANG in the context of NETCONF and Cisco wireless controllers. Option B describes a security protocol (which could be TLS or SSH), Option C refers to protocols like RESTCONF, and Option D is incorrect because YANG is not a scripting language but a data modeling language.
NEW QUESTION # 107
......
Our top priority is to help every customer in cracking the Implementing and Operating Cisco Wireless Core Technologies (350-101) test. Therefore, we have created these formats so that every applicant can prepare successfully for the Implementing and Operating Cisco Wireless Core Technologies (350-101) exam on the first attempt. We are aware that the cost for the registration of the Cisco 350-101 examination is not what everyone can pay. After paying the hefty Implementing and Operating Cisco Wireless Core Technologies (350-101) test registration fee, applicants usually run on a tight budget. This is why TrainingDump provides you with the Implementing and Operating Cisco Wireless Core Technologies (350-101) real questions with up to 1 year of free updates.
New 350-101 Dumps Sheet: https://www.trainingdump.com/Cisco/350-101-practice-exam-dumps.html