시험대비에가장적합한300-610인증시험덤프자료

그리고 KoreaDumps 300-610 시험 문제집의 전체 버전을 클라우드 저장소에서 다운로드할 수 있습니다: https://drive.google.com/open?id=13nlMKpOd0Q1F1pd-Bzytb1Z4icX9c6ev

KoreaDumps의 경험이 풍부한 IT전문가들이 연구제작해낸 Cisco인증 300-610덤프는 시험패스율이 100%에 가까워 시험의 첫번째 도전에서 한방에 시험패스하도록 도와드립니다. Cisco인증 300-610덤프는Cisco인증 300-610최신 실제시험문제의 모든 시험문제를 커버하고 있어 덤프에 있는 내용만 공부하시면 아무런 걱정없이 시험에 도전할수 있습니다.

Cisco 300-610 Exam Syllabus Topics:

Section	Weight	Objectives
Topic 1: Compute Design	25%	- Ethernet connectivity design 1. Fabric interconnect modes 2. Bandwidth and oversubscription 3. Redundancy and high availability - Network virtualization: Cisco VIC adapters 1. vCon placement policies 2. Interface and uplink design 3. Ethernet and Fibre Channel adapter policies - Hyperconverged infrastructure design 1. HX for virtualization 2. Cluster mode design - Storage connectivity design 1. Fabric interconnect modes 2. Direct-attached storage options 3. Bandwidth and oversubscription
Topic 2: Storage Network Design	20%	- iSCSI deployment planning: multipathing, addressing - QoS requirements: Fibre Channel, FCoE, FCIP, iSCSI - SAN topology evaluation - FCoE and Fibre Channel interface design 1. Dedicated / shared mode 2. Oversubscription 3. ISL design 4. Port types
Topic 3: Automation Design	20%	- Compute orchestration and automation 1. vNIC / vHBA templates 2. Service profile templates 3. Global vs local policies - Network orchestration and automation 1. Model-driven programmability 2. NX-API 3. Intersight 4. Ansible, Puppet, Python 5. DCNM
Topic 4: Network Design	35%	- Data center technologies: vPC, vPC+ - Data center interconnect design: VXLAN EVPN, OTV - Layer 2 connectivity design options 1. Services insertion 2. Endpoint mobility 3. Convergence 4. Redundancy and high availability - Management connectivity: in-band, out-of-band - Layer 3 connectivity design options 1. Services insertion 2. IP mobility 3. Convergence 4. Redundancy and high availability - Device and routing virtualization: VDC, VRF - Redundancy and disaster recovery design

>> 300-610인증시험 <<

시험패스에 유효한 300-610인증시험 덤프샘플문제 다운

Cisco 300-610 덤프는 Cisco 300-610 시험의 모든 문제를 커버하고 있어 시험적중율이 아주 높습니다. KoreaDumps는 Paypal과 몇년간의 파트너 관계를 유지하여 왔으므로 신뢰가 가는 안전한 지불방법을 제공해드립니다. Cisco 300-610시험탈락시 제품비용 전액환불조치로 고객님의 이익을 보장해드립니다.

최신 CCNP Data Center 300-610 무료샘플문제 (Q21-Q26):

질문 # 21
An engineer must connect a Cisco UCS B-Series based system to an existing large storage area network fabric. The deployment must support hardware-based load balancing, prevent Fibre Channel domain ID exhaustion, and enable all blade servers to be in the same VSAN. Which set of actions meets the requirements?

A. Option A
B. Option C
C. Option B
D. Option D

정답：B

질문 # 22
An engineer must design a Cisco HyperFlex solution to support a virtualized environment in a single data center location. The design must consider these customer requirements:
- a large-scale cluster with eight or more nodes
- distributed high-performance file system for virtualized servers
- high fault tolerance to multiple node failures
Which action meets these objectives?

A. Configure data destaging and deduplication.
B. Implement a replication factor of four.
C. Create multiple datastores for storage of VM.
D. Enable logical availability zones.

정답：D

설명：
Logical Availability Zones are created to avoid multiple node and component failures on large clusters, and to increase cluster resiliency. Logical Availability Zones can only be enabled with clusters that are 8 converged nodes or larger.

질문 # 23
What influences the number of ISLs that are required between Cisco MDS Series switches?

A. type of storage
B. end-to-end oversubscription ratio
C. N Port virtualization
D. FCoE protocol

정답：B

설명：
The number of ISLs required between Cisco MDS switches will depend on the desired end-to-end oversubscription ratio. The storage port oversubscription ratio from a single storage port to multiple servers can be used to help determine the number of ISLs needed for each edge-to-core connection.

질문 # 24
Refer to the exhibit.

Which template is used when a vHBA template pair is created for a specific server that inherits its attributes from an existing template?

A. Secondary
B. Initial
C. Primary
D. Updating

정답：B

질문 # 25

Refer to the exhibit. A Cisco engineer is configuring a customer scenario with 2 x MDS 9000 switches 24 x UCS B200M6 blade servers. UCS 64S4 Fabric Interconnect in end-host mode and 3 x UCS 5108 server chassis with 2408 Fabric Extenders The engineer installs 6 x SQL Server 2019 on all blades and then notices that there are read and write latencies What is the best way to balance the utilization across the shared ports?

A. Change the assigned speed to 8 Gbps Auto.
B. Disable restrictions on oversubscription ratios
C. Enable "Only dedicate rate mode
D. Set 4 Gbps performance buffers

정답：B

설명：
Reference: https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/configuration/guides/fm_3_2/gen2.html#wp1392649
When restrictions on oversubscription ratios are disabled, the bandwidth allocation among the shared ports is proportionate to the configured speed. (If the configured speed is auto, then bandwidth is allocated assuming a speed of 4 Gbps.) For example, if you have three shared ports configured at 1, 2, and 4 Gbps, then the allocated bandwidth ratio is 1:2:4. In Cisco SAN-OS Release 3.0 and later (or when restrictions on oversubscription ratios are enabled), port bandwidths are allocated in equal proportions, regardless of port speed, so, the bandwidth allocation for the same three ports mentioned in the example would be 1:1:1.

질문 # 26
......

KoreaDumps 의 학습가이드에는Cisco 300-610인증시험의 예상문제, 시험문제와 답입니다. 그리고 중요한 건 시험과 매우 유사한 시험문제와 답도 제공해드립니다. KoreaDumps 을 선택하면 KoreaDumps 는 여러분을 빠른시일내에 시험관련지식을 터득하게 할 것이고Cisco 300-610인증시험도 고득점으로 패스하게 해드릴 것입니다.

300-610유효한 인증덤프: https://www.koreadumps.com/300-610_exam-braindumps.html

KoreaDumps 300-610 최신 PDF 버전 시험 문제집을 무료로 Google Drive에서 다운로드하세요: https://drive.google.com/open?id=13nlMKpOd0Q1F1pd-Bzytb1Z4icX9c6ev