Our NSE6_FNC_AD-7.6 study tool can help you obtain the NSE6_FNC_AD-7.6 certification and own a powerful weapon for your interview. Our NSE6_FNC_AD-7.6 qualification test will help you gain recognition with true talents and better adapted to society. Now, I would like to give you a brief introduction in order to make you deepen your impression of our NSE6_FNC_AD-7.6 test guides. Our NSE6_FNC_AD-7.6 test guides have a higher standard of practice and are rich in content. If you are anxious about how to get NSE6_FNC_AD-7.6 certification, considering purchasing our NSE6_FNC_AD-7.6 study tool is a wise choice and you will not feel regretted. Our learning materials will successfully promote your acquisition of certification.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Integration | 25% | - Integration with FortiGate/FortiOS - FortiNAC-F Manager configuration - Syslog and SNMP trap integration - MDM and third-party device integration |
| Topic 2: Network Visibility and Monitoring | 20% | - Troubleshooting network and device status - Device profiling and classification - Logging and reporting - Guest and contractor management |
| Topic 3: Deployment and Provisioning | 30% | - Security policies and enforcement - Security automation configuration - High Availability (HA) setup and monitoring - Access control and logical networks |
| Topic 4: Concepts and Initial Configuration | 25% | - FortiNAC-F architecture and concepts - Model and organize infrastructure devices - Isolation networks and configuration wizard |
>> NSE6_FNC_AD-7.6 Exam Papers <<
You can easily operate this type of practicing test on iOS, Windows, Android, and Linux. And the most convenient thing about this type of NSE6_FNC_AD-7.6 practice exam is that you don't have to install any software as it is a NSE6_FNC_AD-7.6 web-based practice exam. CramPDF also has a product support team available every time to help you out in any terms.
NEW QUESTION # 80
Refer to the exhibit. If a device connects to the network for the first time, and FortiNAC-F does not receive a DHCP fingerprint, what would be the next step in the device profiling process?
Answer: C
NEW QUESTION # 81
When creating a device profiling rule, what is an advantage of modeling the endpoint as a device in the inventory view?
Answer: C
Explanation:
The correct answer is B . When a device profiling rule classifies an endpoint, the Register as setting can place the device in the host view, the topology/inventory view, or both. The study guide explains that if the profiled endpoint is registered into the topology view, the administrator must select a topology container.
The advantage of modeling the endpoint as a device in the inventory view is that it can be treated as a pingable device , where FortiNAC-F can use Contact Status settings. The guide explains that a modeled pingable device has contact status controls that allow polling to be enabled or disabled, the polling interval to be set, and the last successful and last attempted poll to be displayed.
Option A and option C are not the best answers because connection logs are associated with host connection tracking, not the key advantage of placing a profiled endpoint into inventory as a modeled device. Option D is wrong because user association applies more naturally to hosts or BYOD ownership workflows; it is not the main benefit of inventory modeling. The tested benefit is scheduled reachability monitoring through contact status polling.
NEW QUESTION # 82
Refer to the exhibit. A FortiNAC-F N+1 HA configuration is shown.
What will occur if CA-2 fails?
Answer: C
Explanation:
In an N+1 HA architecture managed by a FortiNAC-F Manager, if a primary CA fails, an available secondary CA is automatically promoted to primary. After CA-2 fails, CA-3 is promoted to a primary role, and the FortiNAC-F Manager load balances management and enforcement responsibilities between the remaining primary CAs, CA-1 and CA-3.
NEW QUESTION # 83
Refer to the exhibits.
An administrator is troubleshooting visibility issues on a modeled switch The switch is configured to use link traps and to provision hosts based on network access policies. The administrator is seeing hosts on ports with no hosts connected and not seeing hosts on ports where hosts are known to be connected.
What is the most likely cause?
Answer: A
Explanation:
The correct answer is C . In a link-trap-based wired deployment, the switch sends a linkUp or linkDown SNMP trap to FortiNAC-F, but that trap does not contain the endpoint MAC address. After receiving the link trap, FortiNAC-F must contact the switch and perform a Layer 2 poll to read the forwarding table and determine which MAC address was added or removed on the port. The FortiNAC-F study guide states that link traps trigger FortiNAC-F to perform a Layer 2 poll to update its awareness of devices connected to the edge device, and the wired link-trap workflow specifically shows FortiNAC-F performing a Layer 2 poll before locating the host record and provisioning access.
The symptoms in the exhibit are classic stale Layer 2 visibility: FortiNAC-F still shows a rogue host on a port where no host is connected, while also failing to show hosts on ports where endpoints are actually connected.
That means FortiNAC-F is not successfully refreshing the switch MAC table information. Since link traps depend on FortiNAC-F being able to poll the switch after the trap, a contact failure with the modeled switch is the most likely cause.
Option A is wrong because logical network settings affect access enforcement, not whether FortiNAC-F can see current MAC-to-port mappings. Option B is wrong because the FortiNAC-F agent is not required for basic switch-port visibility; Layer 2 visibility comes from switch polling, MAC notification traps, or RADIUS. Option D is tempting, but the broader failure shown here is not merely a policy or endpoint-side issue-it is that FortiNAC-F cannot obtain current Layer 2 data from the switch. In practice, you would still verify SNMP/CLI credentials while troubleshooting, but the best answer to the symptom pattern is that FortiNAC-F cannot contact/query the switch successfully.
NEW QUESTION # 84
Refer to the exhibit.
An administrator is configuring FortiNAC-F (or the onboarding of guest users. Which IP address would be used for the gateway defined in the DHCP scope?
Answer: C
Explanation:
The correct answer is D . The question is about guest onboarding , and the exhibit shows the Guest Network using gateway 10.20.1.250 . In a Layer 3 captive network design, FortiNAC-F provides DHCP and DNS services to isolated or captive-network hosts, but the DHCP scope must still give the endpoint the correct default gateway for the network where that endpoint is placed. The study guide specifically warns that, when configuring Layer 3 captive network scopes, the administrator must think from the isolated host's perspective for the IP pool and gateway configuration . It also states that each captive network interface configuration includes an IP address, subnet mask, default gateway, and one or more DHCP scopes.
Option A , 10.0.1.254 , is the infrastructure gateway on the FortiNAC-F service/production-side segment, not the guest network gateway. Option B , 10.0.1.110 , is the FortiNAC-F interface address shown in the diagram, not the default gateway for guest clients. Option C , 10.10.1.250 , is the gateway for the Isolation Network , not the Guest Network . Since the administrator is configuring guest onboarding, the DHCP scope for guest users must hand out 10.20.1.250 as the gateway.
NEW QUESTION # 85
......
We have three different versions of our NSE6_FNC_AD-7.6 exam questions which can cater to different needs of our customers. They are the versions: PDF, Software and APP online. The PDF version of our NSE6_FNC_AD-7.6 exam simulation can be printed out, suitable for you who like to take notes, your unique notes may make you more profound. The Software version of our NSE6_FNC_AD-7.6 Study Materials can simulate the real exam. Adn the APP online version can be applied to all electronic devices.
Valid Exam NSE6_FNC_AD-7.6 Blueprint: https://www.crampdf.com/NSE6_FNC_AD-7.6-exam-prep-dumps.html