JN0-650 Training Questions - JN0-650 Exam Lab Questions

By purchasing our ValidDumps Juniper JN0-650 dumps, you will finish the exam preparation. And then, you will get high quality tests questions and test answers. ValidDumps Juniper JN0-650 test is your friend which is worth trusting forever. Our ValidDumps Juniper JN0-650 Dumps Torrent provide certification training materials to the IT people in the world. It includes test questions and test answers. Quality product rate is 100% and customer rate also 100%.

Juniper JN0-650 Exam Syllabus Topics:

Topic	Details
Topic 1	Interior Gateway Protocols (IGPs): This domain covers internal routing protocols operating within a single autonomous system, including OSPFv2, OSPFv3, and routing policy implementation, along with configuration, troubleshooting, and monitoring skills.
Topic 2	IP Telephony Features: This section focuses on features supporting VoIP deployments including Power over Ethernet, LLDP LLDP-MED protocols, and voice VLAN implementation.
Topic 3	BGP: This section focuses on Border Gateway Protocol operations including route selection, next hop resolution, BGP attributes, communities, load balancing, IPv4 IPv6 address families, advanced options, and routing policy implementation.
Topic 4	Ethernet Switching and Spanning Tree: This section covers advanced Layer 2 switching including filter-based VLANs, private VLANs, MVRP, Layer 2 tunneling via Q-in-Q and L2PT, plus MSTP and VSTP protocols.
Topic 5	IP Multicast: This domain addresses one-to-many communication using multicast routing, covering addressing, ASM vs SSM models, RPF, IGMP snooping, PIM sparse-mode, rendezvous points, Anycast RP, MSDP, and routing policies.

>> JN0-650 Training Questions <<

JN0-650 Exam Lab Questions, JN0-650 Test Sample Online

There are three different versions provided by our company. Every version is very convenient and practical. The three different versions of our JN0-650 study torrent have different function. Now I am willing to show you the special function of the PDF version of JN0-650 test torrent. If you prefer to read paper materials rather than learning on computers, the PDF version of our JN0-650 Guide Torrent must the best choice for you. Because the study materials on the PDF version are printable, you can download our JN0-650 study torrent by the PDF version and print it on papers.

Juniper Enterprise Routing and Switching, Professional (JNCIP-ENT) Sample Questions (Q101-Q106):

NEW QUESTION # 101
You recently committed a change to a router to reject OSPF routes sourced from area 10.
However, you are still seeing area 10 routes in the routing table.
[edit policy-options]
policy-statement advertise-ospf-routes {
term reject-area-10 {
from {
protocol ospf;
area 10;
}
then {
reject;
}
}
term find-ospf {
from {
protocol ospf;
}
then {
accept;
}
}
}
Referring to the exhibit, which statement is correct?

A. The routes remain in the table until the device is rebooted.
B. The routes remain in the table until the routing daemon is restarted.
C. The routes only timeout after 24 hours.
D. The OSPF protocol is first matched by find-ospf and accepted.

Answer: D

NEW QUESTION # 102
You are deploying IP telephony in your enterprise network. Each office will have a handset and support for an additional network-attached end device. Both devices will be using network resources at the same time. Your company also requires that all end device-facing switch interfaces have 802.1X enabled. The handsets do not support 802.1X. In this scenario, which statement is correct?

A. Single supplicant mode needs to be enabled on the switch interfaces.
B. Single-secure supplicant mode needs to be enabled on the switch interfaces.
C. 802.1X and LLDP cannot be configured on the same switch interface.
D. LLDP will be allowed to pass, but LLDP-MED will be blocked.

Answer: A

Explanation:
Single supplicant mode allows one authenticated supplicant device while also permitting a VoIP phone that does not support 802.1X to function on the same interface. This mode is commonly used in IP telephony deployments where a handset and an attached endpoint share the same switch port. LLDP and LLDP-MED traffic are still permitted to support voice device discovery and provisioning.

NEW QUESTION # 103
You have configured a EX Series switch as an access switch. The switch uses 802.1x for access control. The switch uses LLDP-MED to assign network configuration information to VoIP phone devices.
Which statement is true?

A. LLDP-MED information bypasses the 802.1x authentication process.
B. LLDP-MED information is exchanged before 802.1x authentication.
C. LLDP-MED information is exchanged after 802.1x authentication.
D. LLDP-MED acts as a supplicant for the 802.1x authentication process.

Answer: B

NEW QUESTION # 104
Exhibit

Referring to the exhibit, which two statements are correct? (Choose two.)

A. This route has two next hops available.
B. The BGP configuration is for IBGP
C. The BGP configuration includes the multipath parameter.
D. This route has a hidden next hop.

Answer: A,C

Explanation:
The exhibit shows the output of the command show route protocol bgp on router R1 for the prefix 172.16.10.1
/32. To determine the correct characteristics of this route, we analyze the specific BGP attributes and next-hop information provided in the routing table entry:
Multipath Parameter (Option B): The routing table shows two distinct paths for the prefix 172.16.10.1/32. The first path has two next hops (192.168.10.1 and 192.168.20.1) and is marked with the plus symbol (+) and the asterisk (*), indicating it is both an active and the best route. The presence of multiple next hops being used simultaneously for a single BGP path is a clear indication that the multipath parameter is enabled in the BGP configuration. In Junos OS, BGP multipath allows the installation of multiple equal-cost BGP paths into the forwarding table to facilitate load balancing.
Available Next Hops (Option C): The output explicitly lists two functional next hops for the active path:
192.168.10.1 via ge-1/0/0.2 and 192.168.20.1 via ge-1/0/1.3. Both show an outgoing interface, confirming that this route has two next hops available for traffic forwarding.
IBGP vs. EBGP (Option A): The BGP routes shown have an AS path of 200 I. This indicates the routes were learned from an external Autonomous System (AS 200). Furthermore, the protocol preference is 170. In Junos OS, the default preference for External BGP (EBGP) is 170, whereas the default preference for Internal BGP (IBGP) is 200. Therefore, this configuration is for EBGP, not IBGP.
Hidden Next Hops (Option D): The summary line at the top of the exhibit mentions that there are "2 hidden" routes in the inet.0 table. However, these hidden routes are not the next hops for the 172.16.10.1/32 prefix. A hidden route is a prefix that was rejected by policy or has an unreachable next hop; it is not a "hidden next hop" belonging to an active route.

NEW QUESTION # 105
Referring to the exhibit, which statement is correct?

A. The route is learned from three different neighbors.
B. The route is learned from a multihop BGP session.
C. The route is learned from a multipath BGP session.
D. The route is learned from only one neighbor.

Answer: D

NEW QUESTION # 106
......

ValidDumps provides you not only with the best materials and also with excellent service. If you buy ValidDumps questions and answers, free update for one year is guaranteed. So, you can always have the latest test materials. You fail, after you use our Juniper JN0-650 Dumps, 100% guarantee to FULL REFUND. With it, what do you worry about? ValidDumps has a lot of confidence in our dumps and you also faith in our ValidDumps. In order to success, don't miss ValidDumps. If you miss ValidDumps, you will miss a chance to embrace the success.

JN0-650 Exam Lab Questions: https://www.validdumps.top/JN0-650-exam-torrent.html