Cisco 350-101復習資料インタラクティブテストエンジンを使用して &ハイパスレートのQ&A

今多くのIT技術会社は職員がCiscoの350-101資格認定を持つのを要求します。Ciscoの350-101試験に合格するのは必要なことになります。速く試験に合格して資格認証を取得したいなら、我々GoShikenの350-101問題集を使ってみてください。弊社はあなたに相応しくて品質高い350-101問題集を提供します。また、あなたの持っている問題集は一年間の無料更新を得られています。あなたは十分の時間で350-101試験を準備することができます。

Cisco 350-101 Exam Syllabus Topics:

SectionWeightObjectives
Topic 1: Wireless Client Connectivity30%- Client access and security
  • 1. Guest access
  • 2. Authentication and authorization
  • 3. Mobility services
  • 4. WLAN configuration
  • 5. High availability
Topic 2: 802.11 Technology Fundamentals20%- Wireless standards and operations
  • 1. Wi-Fi 6 and Wi-Fi 7 concepts
  • 2. QoS and roaming
  • 3. Channel utilization
  • 4. 802.11 PHY and MAC operations
Topic 3: RF Fundamentals15%- RF characteristics
  • 1. Antenna concepts
  • 2. Signal propagation
  • 3. RF interference
  • 4. Frequency bands and channels
Topic 4: Wireless Monitoring and Management25%- Monitoring and troubleshooting
  • 1. Cisco Catalyst Center
  • 2. Telemetry and analytics
  • 3. Troubleshooting methodologies
  • 4. Packet analysis
Topic 5: Automation and AI10%- Automation technologies
  • 1. Automation workflows
  • 2. APIs and programmability
  • 3. AI-assisted wireless operations

>> 350-101復習資料 <<

自信満々とCisco 350-101認定試験を受験しよう

GoShikenが提供したCiscoの350-101トレーニング資料はあなたが自分の夢を実現することを助けられます。 GoShikenはすべてのCiscoの350-101試験に受かるための資料に含まれていますから。GoShikenを手にすると、あなたは安心に試験の準備に身を投げられるようになります。GoShikenは高品質なトレーニング資料を提供して、あなたが試験に合格することを保証します。明るい未来を準備してあげます。

Cisco Implementing and Operating Cisco Wireless Core Technologies 認定 350-101 試験問題 (Q34-Q39):

質問 # 34
Which benefit does enabling SNMP monitoring provide for Cisco wireless device management?

正解:B

解説:
SNMP monitoring provides centralized visibility and event notification for Cisco wireless infrastructure. On Cisco Catalyst 9800 wireless controllers, SNMP traps are used to send alert messages from SNMP-enabled devices to an SNMP manager, and Cisco specifically documents wireless trap support for access points, clients, mesh, RF, rogue, mobility, RRM, and controller events. Cisco also states that AP-related traps such as crash, register, and no-radio-card events are enabled by default, and that configuring AP traps helps monitor AP status and troubleshoot issues.
Therefore, the direct operational benefit is alerts on access point status. SNMP is not limited to hardware-only metrics; it can expose client counts, joined AP counts, processor usage, memory usage, and wireless event notifications through supported OIDs and traps. Manual log review is the opposite of SNMP's purpose because traps automate notification to a network management system. Fragmented statistics are also incorrect because SNMP enables centralized polling and trap collection across managed devices.


質問 # 35
Refer to the exhibit. An enterprise is deploying Cisco Catalyst 9800 WLCs and is using Catalyst Center as the management platform to oversee wireless access policies. To meet the organization's compliance requirements, all wireless endpoints must be evaluated with security posture validation before gaining access. Which set of CLI commands must be added to the box in the code to complete the configuration?

正解:C

解説:
The correct configuration is aaa-override followed by nac under the existing Catalyst 9800 wireless policy profile. The exhibit already places the administrator in policy-profile configuration mode with wireless profile policy my-policy, so the missing commands must be policy-profile subcommands, not another profile declaration. Cisco's Catalyst 9800 configuration examples show the exact sequence: enter wireless profile policy <policy-profile-name>, enable aaa- override, enable nac, then configure VLAN and no shutdown.
aaa-override permits authorization attributes returned by AAA or Cisco ISE, such as VLAN, ACL, QoS, redirect ACL, or posture-related access controls, to override the locally defined policy.
Cisco's documentation explicitly states that AAA override applies policies coming from AAA or ISE servers, while nac enables Network Access Control in the policy profile. This is the required behavior when endpoints must be posture-validated before normal network access is granted.
Cisco also notes that NAC State is enabled in the policy profile and can only be enabled when AAA override is enabled.
Option A is invalid because nac-policy is not the correct CLI keyword. Options B and D omit NAC.


質問 # 36
What is the maximum transmit power level allowed for 2.4 GHz in the United States?

正解:A

解説:
The correct answer is30 dBm, which equals1 wattof conducted transmit power. In the United States, the 2.4- GHz ISM band used by 802.11b/g/n/ax Wi-Fi falls under FCC Part 15.247. The FCC rule permits digital modulation systems in the2400-2483.5 MHzband and specifies that the maximum conducted output power is1 Watt. Converting watts to dBm uses the formuladBm = 10 log10(mW): 1 watt equals 1000 mW, and10 log10(1000) = 30 dBm.
This is also consistent with Cisco wireless configuration behavior, where Cisco controller Radio Resource Management transmit-power limits use dBm values and support a configurable transmit-power range up to30 dBm. The key distinction is that30 dBm is conducted transmit power, while36 dBmcommonly represents an EIRP value when antenna gain is included, such as 30 dBm transmitter output plus 6 dBi antenna gain. Cisco RF fundamentals emphasize that antenna gain affects coverage and radiated energy, so transmit power and EIRP must not be confused. Reference topic:RF Fundamentals - dBm, mW conversion, regulatory domains, transmit power, antenna gain, and EIRP.


質問 # 37
A wireless engineer is rolling out a group of new Meraki APs across multiple office floors. The APs must be centrally managed through the Meraki dashboard and be set up for automatic cloud registration. Network connectivity has been established, and the company firewall follows standard security policies. To minimize manual configuration for each AP the engineer must configure them to automatically discover the dashboard.
Which action must the engineer take?

正解:B

解説:
Meraki AP onboarding is designed around cloud-initiated registration, not manual controller discovery. A Meraki AP must obtain network reachability, resolve Meraki cloud services, and establish outbound connectivity to the Meraki dashboard. Cisco Meraki documentation states that the dashboard provides centralized management and that, for dashboard management, a Meraki device must communicate with the Cisco Meraki cloud over a secure tunnel. The MR quick-start process further describes that, after power-on, the AP requests an IP address by DHCP, reaches the Meraki cloud through the Internet, and checks in to the dashboard.
Therefore, the required action is to connect the APs to a network with Internet access and permit the necessary outbound firewall flows to Meraki cloud services. A site-to-site VPN is unnecessary for dashboard discovery. Static management addressing may be used in constrained environments, but it increases manual work and is not required for automatic registration. DHCP lease-table serial registration is not a Meraki onboarding mechanism. Reference topics:Wireless Network Implementation - Meraki AP cloud onboarding, DHCP/DNS reachability, outbound firewall policy, and dashboard-based AP lifecycle management.


質問 # 38
An organization must manage ongoing firmware updates for redundant controllers in the network.
They will use Cisco Catalyst Center for deployment and visibility. The current environment uses centralized and distributed management approaches. Automation and reporting are critical to minimize operational workload. Which method must be used to manage structured update processes and monitor progress throughout the update cycle?

正解:B

解説:
The correct method is software image management workflows, specifically Cisco Catalyst Center Software Image Management, commonly referenced as SWIM. Cisco documents SWIM as the mechanism used to manage software upgrades and maintain consistency of image versions across the network. It provides an image repository, golden-image assignment, image distribution, activation, readiness checks, and scheduled execution. Cisco's wireless automation guidance specifically states that SWIM is used to update Catalyst 9800 Series Wireless Controller software by distributing the image from the Catalyst Center repository to wireless controllers and upgrading the images running on those controllers; both stages can run immediately or be scheduled for a defined maintenance window.
Option C is also validated by Catalyst Center's update-status and workflow views. Cisco documents Image Update Status as the view that shows all update tasks, filters by in-progress, success, or failure, and displays a progress bar for active updates. The workflow view then exposes distribution and activation task status, timing, prechecks, postchecks, checksum verification, and AP pre-image download details. Inventory snapshots and templates do not execute controller firmware upgrades, and "lifecycle workflow" is too generic.


質問 # 39
......

すべての受験生は350-101試験に順調に合格するのを希望しますが、そんなに簡単ではありません。この試験を準備するあなたは心配する必要がありません。GoShikenの提供する問題集は受験生の試験への合格を保証することができます。我々の最新の問題集を利用して、気楽で350-101試験に合格することができます。

350-101合格対策: https://www.goshiken.com/Cisco/350-101-mondaishu.html