2026 Latest NewPassLeader NSE6_EDR_AD-7.0 PDF Dumps and NSE6_EDR_AD-7.0 Exam Engine Free Share: https://drive.google.com/open?id=1KouBujKw63wzxN7u1L9nGvLvzYaDrW5h
So many candidates have encountered difficulties in preparing to pass the NSE6_EDR_AD-7.0 exam. But our study materials will help candidates to pass the exam easily. Our NSE6_EDR_AD-7.0 guide questions can provide statistics report function to help the learners to find weak links and deal with them. The NSE6_EDR_AD-7.0 Test Torrent boost the function of timing and simulating the exam. They set the timer to simulate the exam and help the learners adjust the speed and keep alert.
| Section | Objectives |
|---|---|
| Policy Configuration and Management | - Prevention and detection policies - Policy tuning and exclusions |
| Forensics and Investigation | - Endpoint investigation workflows - Event analysis and telemetry review |
| Threat Detection and Response | - Incident detection and alert handling - Automated response actions and remediation |
| FortiEDR Architecture and Components | - FortiEDR components overview (agents, management console, collectors) - System architecture and deployment models |
| Installation and Deployment | - Server and console installation requirements - Agent deployment and onboarding |
| System Administration and Troubleshooting | - System monitoring and health checks - Troubleshooting common FortiEDR issues |
>> Reliable NSE6_EDR_AD-7.0 Exam Braindumps <<
Many customers may be doubtful about our price. The truth is our price is relatively cheap among our peer. The inevitable trend is that knowledge is becoming worthy, and it explains why good NSE6_EDR_AD-7.0 resources, services and data worth a good price. We always put our customers in the first place. Thus we offer discounts from time to time, and you can get 50% discount at the second time you buy our NSE6_EDR_AD-7.0 question dumps after a year. Lower price with higher quality, that’s the reason why you should choose our NSE6_EDR_AD-7.0 prep guide.
NEW QUESTION # 16
Refer to the exhibits.
The application policy logs and application details are shown. Collector C8092231196 is a member of the Finance group. In this scenario, what must you do to block the FileZilla application? (Choose one answer)
Answer: B
Explanation:
The correct answer is B. Deny the application in the Finance policy .
The FortiEDR 7.0.0 Administration Guide states that Communication Control policies define the actions to be taken for a given application or application version . It also states that each Communication Control policy applies to specific Collector Groups , and all devices that belong to those Collector Groups follow that policy. A Collector Group can be assigned to only one Communication Control policy.
In the exhibit, the Collector C8092231196 is stated to be a member of the Finance group. Therefore, to block FileZilla for that Collector, the application action must be set to Deny under the Finance policy , because that is the policy context that applies to the Collector's group.
The guide also explains that you can modify a policy action for an application/version so that the selected application is explicitly set to Allow or Deny for the relevant policy. When modified this way, the Application
/Version Details area shows the action as manually changed and excluded from the original policy action.
Option A is wrong because assigning a Simulation Communication Control Policy to the DBA group does not affect a Collector in the Finance group. Option C is wrong because assigning the Finance policy to the DBA group would affect DBA Collectors, not the Finance Collector in the scenario. Option D is wrong because assigning the Finance policy to a broader group such as Default Collector Group is unnecessary and could over-broaden the policy impact. The precise action is to deny FileZilla in the policy that applies to the Collector's own group: Finance policy .
=========
NEW QUESTION # 17
You discovered that a newly installed collector does not display on the Inventory tab in the central manager.
Which two troubleshooting steps must you perform? (Choose two answers)
Answer: A,B
Explanation:
The correct answers are B and C .
The FortiEDR 7.0.0 Administration Guide has a specific troubleshooting section named "A FortiEDR Collector does not display in the INVENTORY tab." It states that after a Collector is first launched, it registers with the FortiEDR Central Manager and appears in the Inventory tab. If it does not appear, the first checks are to confirm that the device where the Collector is installed is powered on and has Internet connectivity, and to validate that ports 8081 and 555 are available and not blocked by another third-party product.
Option B is therefore correct in the exam sense because ports 8081 and 555 must be open for FortiEDR communication. More precisely, the Collector communicates with the Aggregator on port 8081 and the Core on port 555 , not directly to the Central Manager in every architecture. The option wording says "between the collector and the central manager," which is technically loose, but the required troubleshooting item is still the port availability.
Option C is also correct because the same guide says to check that the endpoint is powered on and connected.
In practical FortiEDR troubleshooting, this includes confirming the FortiEDR Collector service/driver are running on the endpoint; otherwise the Collector cannot register or report health.
Option A is not listed in the FortiEDR guide as a required step for this issue. Option D is not the best answer because the guide says logs are generally retrieved when Fortinet Support requests them, and Collector logs can only be exported for Collectors in Running status; a newly installed Collector that does not appear in Inventory cannot normally be selected from Central Manager for log export.
NEW QUESTION # 18
Refer to the Exhibit:
Based on the incident details shown in the exhibit, which two statements about this incident are true? (Choose two answers)
Answer: B,C
Explanation:
The correct answers are A and C .
The exhibit shows an audit/response action stating that IP address 74.125.235.20 was added to malicious IP addresses on firewall FortiGate . This matches the FortiEDR playbook action Block address on Firewall .
The guide states that this action ensures connections to remote malicious addresses associated with the security event are blocked, and that a firewall connector must already be configured for this action. It also explains that a checkmark in a classification column means communication with the affected destination is automatically blocked when a security event with that classification is triggered.
Option C is the second best answer because FortiEDR events are initially classified by FortiEDR detection logic/Core, and the guide states that classifications are initially determined by the Core but can later be changed automatically by FortiEDR Cloud Service or manually. The exhibit shows "Classification Changed To: Suspicious (By Fortinet)" , but it does not say the event was manually classified by an administrator. So the event classification process is FortiEDR-driven, with later Fortinet/FCS-style automatic classification possible.
Option B is wrong. The exhibit shows one raw-data row with device cwinserv-32 +2 , which indicates more than one affected device/raw item is represented in the aggregation. So it did not occur on only one device.
Option D is wrong because the incident rows clearly show Unhandled . The guide states that security events are initially marked as unread and unhandled, and the unread/unhandled status helps users track whether anyone has read and handled the event.
=========
NEW QUESTION # 19
Refer to the exhibits.
What happens when the net user command runs on an endpoint? (Choose one answer)
Answer: A
Explanation:
The correct answer is C .
The exhibit shows a Threat Hunting saved query named CLI Command with the query:
Target.Process.Filename ( " net.exe " )
It is configured as a Scheduled Query , classified as Suspicious , and set to repeat every 15 minutes . The FortiEDR guide states that saving a Threat Hunting query allows it to be defined as a scheduled query to automate threat detection. When the scheduled query runs and detects matching activity, a security event is automatically created in the Incidents tab .
The guide also states that scheduled queries run automatically according to the configured schedule, and each time a match is detected, FortiEDR generates a security event in the Incidents tab and sends notifications according to the security event configuration.
So, when the endpoint runs:
net user edruser password! /ADD
FortiEDR records the relevant process activity, and when the scheduled query runs, it matches the target process net.exe and creates an incident/security event. It is not immediate by default because the query is scheduled every 15 minutes. It also does not block CLI commands by default unless playbook actions or policy controls are configured. The activity is treated according to the saved query classification, which in the exhibit is Suspicious .
=========
NEW QUESTION # 20
You added three new applications to FortiEDR using only the Path attribute. What are two expected outcomes of this configuration? (Choose two answers)
Answer: B,C
Explanation:
The correct answers are A and B .
The FortiEDR 7.0.0 Administration Guide states that newly added applications are disabled by default , which means they are not blocked unless enabled. The guide further explains that the default state can be changed by enabling the Enable Default application state option in the Application Control Manager settings. Therefore, option A is correct.
Option B is also correct because Application Control allows an application to be defined by Hash or by any combination of File Name / Path / Signer . The guide says that the Path field specifies the path to the executable file of the application to be blocked. When using path-based matching, the enforcement is tied to the specified path criteria, not to every possible location of the same file.
Option C is wrong because the file name does not also need to match when only the Path attribute is used.
Option D is wrong because blocking all instances regardless of location applies when only the File Name field is used, not when the match is path-specific. The guide explicitly states that if only the File Name field is filled, the application is blocked no matter where the executable appears.
NEW QUESTION # 21
......
Our Fortinet NSE6_EDR_AD-7.0 can help you clear exams at first shot. We promise that we provide you with best quality Fortinet NSE6_EDR_AD-7.0 original questions and competitive prices. We provide one year studying assist service and one year free updates downloading of Fortinet NSE 6 - FortiEDR 7.0 Administrator exam questions.
Test NSE6_EDR_AD-7.0 Lab Questions: https://www.newpassleader.com/Fortinet/NSE6_EDR_AD-7.0-exam-preparation-materials.html
P.S. Free & New NSE6_EDR_AD-7.0 dumps are available on Google Drive shared by NewPassLeader: https://drive.google.com/open?id=1KouBujKw63wzxN7u1L9nGvLvzYaDrW5h