Pass4Test에서는 Juniper인증 JN0-352시험을 도전해보시려는 분들을 위해 퍼펙트한 Juniper인증 JN0-352덤프를 가벼운 가격으로 제공해드립니다.덤프는Juniper인증 JN0-352시험의 기출문제와 예상문제로 제작된것으로서 시험문제를 거의 100%커버하고 있습니다. Pass4Test제품을 한번 믿어주시면 기적을 가져다 드릴것입니다.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Tunnels and Overlays | 5-10% | - GRE, IP-IP and dynamic tunnel configuration - Tunnel types, encapsulation and operation - Overlay network design and connectivity |
| Topic 2: Layer 2 Security | 10-15% | - Port security, MAC limiting and storm control - DHCP snooping, Dynamic ARP Inspection and IP Source Guard - Layer 2 firewall filters and security features |
| Topic 3: High Availability and Resiliency | 5-10% | - Graceful restart and non-stop routing - Network resiliency design and troubleshooting - Redundancy protocols and failover mechanisms |
| Topic 4: Protocol Independent Routing | 10-15% | - Routing tables, static routes and route preference - Basic routing policy and filter operation - Routing instances and route selection criteria |
| Topic 5: IP Multicast | 5-10% | - PIM Dense Mode, Sparse Mode and RP mechanisms - IGMP operation and configuration - Multicast routing monitoring and troubleshooting |
| Topic 6: Layer 2 Switching and VLANs | 15-20% | - Spanning Tree Protocol (STP, RSTP, MSTP) operation and configuration - VLAN concepts, configuration, trunking and tagging - Link Aggregation Groups (LAG) and Virtual Chassis |
| Topic 7: IS-IS | 10-15% | - Configuration and route exchange - Scalable enterprise deployment and troubleshooting - Adjacency establishment, levels and metrics |
| Topic 8: OSPF | 15-20% | - Neighbor formation, area design and LSA types - Route summarization and redistribution - Configuration, verification and troubleshooting |
| Topic 9: BGP | 15-20% | - Neighbor relationships and session establishment - Routing policies, filtering and common troubleshooting - Route advertisement, attributes and path selection |
아직도Juniper JN0-352 인증시험을 어떻게 패스할지 고민하시고 계십니까? Pass4Test는 여러분이Juniper JN0-352덤프자료로Juniper JN0-352 인증시험에 응시하여 안전하게 자격증을 취득할 수 있도록 도와드립니다. Juniper JN0-352 시험가이드를 사용해보지 않으실래요? Pass4Test는 여러분께Juniper JN0-352시험패스의 편리를 드릴 수 있다고 굳게 믿고 있습니다.
질문 # 97
Which statement is correct about the configuration shown in the exhibit?
정답：D
질문 # 98
You manage the Layer 2 network shown in the exhibit. You experience a failure on the ge-0/0/0 link between Switch-1 and Switch-2.
Which statement is correct about the expected behavior?
정답：B
질문 # 99 
Click the Exhibit button.
Devices on VLAN 5 and VLAN 7 need to communicate with each other.
Referring to the exhibit, what will satisfy this requirement?
정답：A
설명：
VLAN 5 and VLAN 7 are two entirely separate Layer 2 broadcast domains, each with its own distinct IP subnet, and devices in one VLAN can never reach devices in the other through switching alone - Layer 3 routing between the two subnets is mandatory for any inter-VLAN communication to occur, regardless of how the VLANs are configured at Layer 2. On a single EX Series switch, the correct and standard mechanism for enabling this routing without an external router is to create one integrated routing and bridging (IRB) logical interface for each VLAN, assign each IRB the appropriate gateway IP address for its respective subnet (192.168.5.1 for VLAN 5's irb.5 and 192.168.7.1 for VLAN 7's irb.7, for example), and ensure routing is active on the switch so that traffic arriving at one IRB's gateway address destined for the other VLAN's subnet is routed internally between the two IRB interfaces. Attempting to bind a single family inet interface with two distinct subnet addresses via secondary addressing conflates two separate broadcast domains onto one Layer 3 interface incorrectly and is not how VLAN routing is architected in Junos. Spanning tree exists purely to prevent Layer 2 loops and has no routing function whatsoever, so configuring it cannot enable inter-VLAN reachability. Placing both VLANs on a single trunk with Multiple VLAN Registration Protocol (MVRP) only automates VLAN membership propagation across trunk links; it does not provide any Layer 3 routing capability between the VLANs either. Reference topics: Junos Enterprise Switching - Routing VLANs, Configuring IRB Interfaces for Inter-VLAN Routing.
질문 # 100
Which two statements are true about an EX2300 device? (Choose two.)
정답：B,C
질문 # 101
You are creating an aggregated Ethernet bundle using LACP on your Juniper Networks EX Series device. In this scenario, which statement is correct?
정답：C
설명：
IEEE 802.3ad LACP defines two distinct negotiation modes, active and passive, and the standard's fundamental requirement for successful negotiation is that at least one end of the point-to-point link must be configured in active mode; an actively configured device initiates LACPDU transmission on its own, while a passively configured device waits and only responds once it receives an LACPDU from its peer. If both ends of the bundle were left in passive mode simultaneously, neither side would ever initiate the exchange, and no negotiation -- and therefore no functioning aggregated bundle -- would ever occur; at least one active participant is therefore mandatory, though having both sides active (active-active) is also fully valid and is in fact the most common production deployment. Junos does not enable LACP automatically on aggregated Ethernet interfaces; unlike some competing platforms, LACP must be explicitly configured under the aggregated-ether-options lacp hierarchy, and specifying no LACP configuration at all results in a 'static' LAG that relies purely on physical link-state rather than any protocol negotiation -- there is no implicit default active mode. There is likewise no requirement to configure differing LACP system priority values between the two peer switches; system priority is used only to determine which side of the link controls port selection during negotiation and has no bearing on whether the bundle can form. Both sides being mandatorily active is a stricter requirement than the actual standard specifies.
질문 # 102
......
Juniper JN0-352덤프구매에 관심이 있는데 선뜻 구매결정을 하지 못하는 분이라면 사이트에 있는 demo를 다운받아 보시면Juniper JN0-352시험패스에 믿음이 생길것입니다. Juniper JN0-352덤프는 시험문제변경에 따라 업데이트하여 항상 가장 최선버전이도록 유지하기 위해 최선을 다하고 있습니다.
JN0-352인기자격증 시험 덤프자료: https://www.pass4test.net/JN0-352.html