Pass4sures have made customizable Huawei H35-831 practice tests so that users can take unlimited tests and improve Huawei H35-831 exam preparation day by day. These H35-831 practice tests are based on the real examination scenario so the students can feel the pressure and learn to deal with it. The customers can access the result of their previous given H35-831 Exam history and try not to make any excessive mistakes in the future.
Huawei H35-831 certification exam is intended for professionals who have a minimum of five years of experience in the field of data communication and networking. HCIE-Datacom-Carrier (Written) V1.0 certification is suitable for network engineers, network architects, network administrators, and other IT professionals who are responsible for designing, implementing, and managing carrier-grade data communication networks.
Huawei H35-831 exam is intended for experienced network professionals who are seeking to enhance their skills and knowledge in data communication and carrier networks. H35-831 Exam is ideal for network engineers, network administrators, and network architects who are responsible for designing, implementing, and managing complex data communication and carrier networks. H35-831 exam validates the candidate's ability to design, deploy, and troubleshoot data communication and carrier networks and provides a competitive edge in the job market.
Sometimes choice is greater than important. Good choice may do more with less. If you still worry about your exam, our Huawei H35-831 braindump materials will be your right choice. Our exam braindumps materials have high pass rate. Most candidates purchase our products and will pass exam certainly. If you want to fail exam and feel depressed, our Huawei H35-831 braindump materials can help you pass exam one-shot.
Candidates who pass the Huawei H35-831 (HCIE-Datacom-Carrier (Written) V1.0) certification exam will have a strong foundation in data communication and will be well-equipped to handle the challenges of designing, deploying, and maintaining carrier-grade data communication networks. HCIE-Datacom-Carrier (Written) V1.0 certification is highly regarded in the telecommunications industry and can help professionals advance their careers and increase their earning potential.
NEW QUESTION # 12
In the OSPFv3 network shown, RTD imports an external route. The AS-External-LSA details are checked on RTG. Based on the following information, what should the Originating Router be?
Exhibit 37.1 - Original topology/configuration figure
Exhibit 37.2 - Original topology/configuration figure
Answer: D
Explanation:
Huawei Reference Verification:
Huawei OSPFv3 defines an AS-External-LSA as a link-state advertisement originated by an ASBR that imports external reachability into the OSPF domain. The LSA's Advertising Router field retains the 32-bit router ID of the originating ASBR as the advertisement is flooded through different areas and received by downstream nodes. RTD imports the prefix 3001:1::/48 and has router ID 4.4.4.4; RTG merely examines the resulting LSDB. The Originating Router is therefore 4.4.4.4, not RTG's router ID or an intermediate router's identifier.
Technical Deep Dive:
A is correct. RTD acts as the OSPFv3 ASBR by executing an IS-IS route import. The external IPv6 prefix is described in an OSPFv3 AS-External-LSA, which is distributed to other areas according to OSPFv3 flooding rules. Although OSPFv3 carries IPv6 routing information, its Router ID remains a 32-bit identifier displayed in dotted-decimal form. RTD's Router ID is 4.4.4.4. RTE (5.5.5.5), RTF (6.6.6.6) and RTG (7.7.7.7) can receive and propagate the LSA but do not replace the advertising router field. The identity is crucial because routers use the ASBR and routing information in the LSDB to calculate how to reach the external destination.
The command `display ospfv3 lsdb external` provides the relevant LSA fields, including the Originating Router and advertised external prefix.
#######################################################
NEW QUESTION # 13
Which of the following statements are true regarding multicast packets in a BIERv6 multicast network?
Select all that apply.
Answer: C,D
NEW QUESTION # 14
Which of the following statements is incorrect about the SR-TE tunnel configuration below?
[R1] interface tunnel1
[R1-Tunnel1] ip address unnumbered interface LoopBack0
[R1-Tunnel1] tunnel-protocol mpls te
[R1-Tunnel1] destination 3.3.3.3
[R1-Tunnel1] mpls te tunnel-id 1
[R1-Tunnel1] mpls te signal-protocol segment-routing
[R1-Tunnel1] mpls te pce delegate
Select all that apply.
Answer: A,B
Explanation:
Huawei Reference Verification:
Huawei's SR-TE tunnel CLI separates the transport tunnel type, the signaling protocol and the path- management mode. `tunnel-protocol mpls te` establishes an MPLS TE tunnel interface; `mpls te signal- protocol segment-routing` identifies Segment Routing as its signaling technology. `ip address unnumbered interface LoopBack0` borrows the Loopback0 address, and `mpls te tunnel-id 1` sets the tunnel identifier. The command `mpls te pce delegate` delegates LSP path management to the PCE through PCEP, rather than specifying a manually configured explicit path. Therefore the claims that SR is the tunnel protocol or that the path is manually specified are incorrect.
Technical Deep Dive:
C and D are incorrect. The displayed interface is a Tunnel1 MPLS TE tunnel whose address is borrowed from LoopBack0 and whose destination is 3.3.3.3. The tunnel ID is 1, unique as required within the applicable tunnel context. Segment Routing in this configuration is the signaling mechanism, not the value of the `tunnel- protocol` field. PCE delegation transfers supported LSP path computation/management to a Path Computation Element; it does not define a static explicit-path sequence locally. A manual explicit path would require its own explicit-path configuration and reference. PCEP is a TCP-based control protocol allowing the PCC to report LSP state and the PCE to deliver calculated routes or updates. An operational engineer can inspect the status with `display interface tunnel 1`, `display mpls te tunnel` and `display current-configuration interface Tunnel1`. The broader lesson is to read CLI keywords according to the configuration hierarchy rather than interpreting the presence of 'segment-routing' as a replacement of the underlying MPLS TE tunnel type.
#######################################################
NEW QUESTION # 15
Which of the following key factors must be considered when designing an IGW for an IP core network?
Select all that apply.
Answer: A,B,C,D
Explanation:
Huawei Reference Verification:
Huawei's carrier IP gateway design requires sufficient policy-processing scale, forwarding resources, routing- information transport capacity, and security controls. An Internet Gateway can receive large external BGP route sets, process prefix and community policies, and advertise selected reachable destinations into other parts of the backbone. Its interface bandwidth, routing-table resources, CPU and memory, and forwarding ASIC capacity must match expected demand. As a boundary between autonomous networks, it also requires routing filtering and defenses against harmful or unauthorized traffic. These are complementary responsibilities: a high packet throughput specification does not compensate for poor BGP scalability or insufficient security. All four proposed factors must be considered.
Technical Deep Dive:
A, B, C, and D are correct. Routing-policy scale covers BGP prefixes, filters, route preference, community and AS-path attributes, and traffic-engineering decisions. Hardware capacity includes interface rates, route and ACL table sizes, packet processing, control CPU, memory, and line-card traffic-management capability.
Route transport capability covers BGP session scale, route propagation, policy operations, and convergence under network changes. Security requires route filtering, ingress antispoofing, management-plane access control, control-plane policing, and appropriate DDoS mitigation. On Huawei NetEngine platforms, NP/ASIC forwarding hardware performs FIB lookups, ACL matching, classification, and QoS handling, whereas the control-plane subsystem maintains BGP route state. Designers must size these subsystems independently.
`display bgp peer`, `display bgp routing-table`, `display cpu-usage`, `display memory-usage`, and routing statistics can provide operational evidence. A good IGW design satisfies all four domains simultaneously rather than optimizing only raw bandwidth.
#######################################################
NEW QUESTION # 16
When synchronizing LSDBs over a P2P network, IS-IS does not need to send CSNPs.
Answer: B
Explanation:
Huawei Reference Verification:
Huawei's IS-IS implementation distinguishes the CSNP behavior on broadcast and point-to-point links. A DIS periodically sends CSNP summaries on broadcast networks, but P2P adjacencies still exchange CSNPs during initial database synchronization. After comparing the received complete list of LSP headers with its own LSDB, a router can use PSNPs to request missing information or acknowledge LSPs. The absence of periodic DIS-based CSNP flooding on P2P links does not mean that CSNPs are never exchanged. Hence the assertion that P2P synchronization does not need CSNPs is false.
Technical Deep Dive:
B is FALSE. IS-IS uses Hellos to establish adjacency, LSPs to disseminate link-state information, and SNPs to compare or request database information. A CSNP provides a complete summary of known LSPs; PSNPs carry partial summaries, requests or acknowledgments depending on link context. On a P2P link, the two routers exchange CSNPs when the adjacency is initially established so they can identify differing LSP content. Missing or stale LSPs are requested or refreshed through the appropriate PSNP and LSP exchange.
P2P links do not elect a DIS and thus lack the periodic DIS behavior seen on multiaccess LANs. But the absence of a DIS is not proof that CSNP is unnecessary at adjacency setup. This is an important exam-key correction: the intended statement is false under Huawei's documented P2P LSDB synchronization procedure.
#######################################################
NEW QUESTION # 17
......
H35-831 Latest Exam Answers: https://www.pass4sures.top/HCIE-Datacom/H35-831-testking-braindumps.html