BONUS!!! Download part of PrepAwayExam NSE5_FSW_AD-7.6 dumps for free: https://drive.google.com/open?id=1bUWm_ONmZQHImKqd6MLj1R4CiqIbLb9U
Students often feel helpless when purchasing test materials, because most of the test materials cannot be read in advance, students often buy some products that sell well but are actually not suitable for them. But if you choose NSE5_FSW_AD-7.6 practice test, you will certainly not encounter similar problems. All the materials in NSE5_FSW_AD-7.6 Exam Torrent can be learned online or offline. You can use your mobile phone, computer or print it out for review. With NSE5_FSW_AD-7.6 practice test, if you are an office worker, you can study on commute to work, while waiting for customers, and for short breaks after work.
| Section | Objectives |
|---|---|
| Topic 1: Layer 2 control and security | - Use ACLs, security profiles, and VLAN security mechanisms on FortiSwitch - Use port security options on FortiSwitch - Use filtering and antispoofing techniques on FortiSwitch |
| Topic 2: Monitoring and troubleshooting | - Use packet capturing methods to monitor and troubleshoot traffic issues - Use tools to view and extract network information from FortiSwitch - Troubleshoot FortiLink issues - Interpret system logs, monitor port statistics, and diagnose connectivity issues |
| Topic 3: Deployment and management | - Configure and provision FortiSwitch - Deploy and configure FortiSwitch in a multi-tenancy environment - Deploy FortiSwitch supported deployment topologies |
| Topic 4: FortiSwitch concepts | - Configure switching and routing on FortiSwitch - Use QoS and LLDP-MED on FortiSwitch - Configure STP to prevent network loops - Configure the ports required for stack deployment - Configure switch ports, split port, and available transceivers - Configure VLANs using FortiSwitch |
>> NSE5_FSW_AD-7.6 Exam Labs <<
Because these Fortinet NSE 5 - FortiSwitch 7.6 Administrator NSE5_FSW_AD-7.6 exam dumps are designed by experts after in-depth research about the certification exam content. The Fortinet NSE 5 - FortiSwitch 7.6 Administrator exam product is made of 100% real Fortinet NSE5_FSW_AD-7.6 Exam Questions verified by Fortinet professionals. The Fortinet NSE 5 - FortiSwitch 7.6 Administrator NSE5_FSW_AD-7.6 Valid Dumps of PrepAwayExam are exceptionally curated and approved by experts. We have hired professionals who after in-depth research add the most important and real test questions in three formats of our NSE5_FSW_AD-7.6 exam practice material.
NEW QUESTION # 16
You are configuring FortiSwitch to perform layer 3 inter-VLAN routing while managed by FortiGate over FortiLink. On supported hardware models, FortiSwitch can offload routing decisions for better performance.
1How does FortiSwitch perform routing between VLANs? (Choose one answer)
Answer: C
Explanation:
According to theFortiSwitchOS 7.6 FortiLink Guideand theFortiSwitch 7.6 Study Guide, managed FortiSwitch units support a feature calledInter-VLAN Routing Offload. Traditionally, in a FortiLink deployment, traffic between VLANs is "hair-pinned" back to the FortiGate for routing and security inspection. However, to increase performance and reduce latency, the FortiGate can program the managed FortiSwitch to handle Layer 3 routing of trusted traffic locally.
The technical mechanism behind this performance gain is the use of theForwarding Information Base (FIB) programmed directly into the switch'sASIC (Application-Specific Integrated Circuit). When routing offload is enabled (specifically using the set switch-controller-offload enable command on the VLAN interface), the FortiGate pushes the necessary routing table and gateway information to the switch hardware.
This allows the FortiSwitch to perform packet lookups and forwarding decisions at wire speed within the silicon, bypassing the general-purpose CPU and the FortiLink control plane for that specific traffic flow.
The documentation notes that this feature requires anAdvanced Features Licenseon the tier-1 FortiSwitch and is typically applied to the switch closest to the FortiGate.2While dynamic routing (Option B) is supported on FortiSwitch, it is not theonlything offloaded; static routes and inter-VLAN gateway traffic are the primary use cases for this offload mechanism. Therefore, the correct architectural description is that the switch utilizes its hardware-based FIB to accelerate inter-VLAN communication.
NEW QUESTION # 17
Which statement about the use of the switch port analyzer (SPAN) packet capture method is true?
Answer: B
Explanation:
The correct statement about using the Switch Port Analyzer (SPAN) packet capture method on FortiSwitch is that "Mirrored traffic can be sent across multiple switches (A)." This feature allows for extensive traffic analysis as it enables network administrators to configure SPAN sessions that span across different switches, thereby providing the capability to monitor traffic across a broad segment of the network infrastructure.
NEW QUESTION # 18
Refer to the exhibit.
Port24 is the only uplink port connected to the network where you need access to FortiSwitch management services. However, FortiSwitch is not accessible on its management interface with IP address 10.0.13.3.
Based on the configuration shown in the exhibit, which two actions should you take to fix the issue and access FortiSwitch? (Choose two answers)
Answer: B,D
Explanation:
According to theFortiSwitchOS 7.6 Administration Guide (Page 320), management traffic on a FortiSwitch is associated with a specific logical interface, which in this case is the"internal"interface. The exhibit shows that the"internal"interface is configured onVLAN 4094(both as native and allowed). This means that for any management traffic (such as HTTPS, SSH, or SNMP) to reach the switch CPU, it must be able to traverse the physical uplink on VLAN 4094.
However, the configuration forport24(the uplink) is currently restricted. It is set withnative VLAN 100and an allowed-vlans list that only includes100 and 200. Because VLAN 4094 is not included in the allowed list of port24, all frames belonging to the management VLAN (4094) are dropped by the switch's ingress/egress filters on the uplink.
To resolve this and restore management access, the administrator has two valid configuration paths based on the provided options:
* Option B:Change thenative VLAN on port24 to VLAN 4094. By making 4094 the native VLAN, untagged management traffic can traverse the port, effectively allowing the "internal" interface to communicate with the network.
* Option D:Add VLAN 4094 to the allowed VLANs on port24. This ensures that VLAN 4094 is no longer filtered out, allowing management frames to pass through the uplink while maintaining the current native VLAN for other traffic.
Option C is irrelevant as removing a working VLAN (200) does not help the management traffic. While Option A describes an alternate architectural approach (moving management into an already-allowed VLAN), Options B and D represent the direct fixes for the mismatch described in the 7.6 administration documentation.
NEW QUESTION # 19
What does the switchauto-networksetting control on FortiSwitch? (Choose one answer)
Answer: A
Explanation:
According to theFortiSwitchOS 7.6 Administration Guideand theFortiSwitch 7.6 Study Guide, the auto- network setting (configured via config switch auto-network) is a global feature introduced to simplify the initial deployment of switches. Starting inFortiSwitchOS 7.2.0and continuing through7.6, this feature is enabled by defaulton all new and factory-reset units.1 The primary function of theauto-networksetting is to facilitate theautomatic discovery of the FortiGate and the establishment of the FortiLink interface (Option B). When enabled, the switch automatically scans its physical ports to detect a management entity, such as a FortiGate controller. This "zero-touch" discovery mechanism allows the switch to identify the correct uplink ports and automatically configure them as members of theFortiLinkfabric without manual CLI or GUI intervention.
Furthermore, the documentation notes that auto-network also managesauto-topology, which allows two switches to automatically form anInter-Switch Link (ISL)trunk between them.2This includes setting the management VLAN (typically VLAN 4094) and ensuring that DHCP snooping is trusted on these discovered links.3If an administrator intends to use the switch in a strictly standalone mode without any auto-discovery or FortiLink features, the documentation specifies that they must manually disable the auto-network status and the auto-fortilink-discovery global settings to prevent the switch from attempting to join a managed fabric.
4
Regarding other options:Option Arefers to Dynamic Port Policy or NAC features.Option Cis a standard STP configuration unrelated to the auto-network discovery suite.Option Dis a broader management capability that depends on successful network discovery but is not the specific control point for the auto-network setting.
NEW QUESTION # 20
What are two ways in which automatic MAC address quarantine works on FortiSwitch? (Choose two.)
Answer: A,C
Explanation:
Reference: FortiSwitch 7.6 Study Guide, page 263
NEW QUESTION # 21
......
All kinds of exams are changing with dynamic society because the requirements are changing all the time. To keep up with the newest regulations of the NSE5_FSW_AD-7.6exam, our experts keep their eyes focusing on it. Our NSE5_FSW_AD-7.6 practice materials are updating according to the precise of the real exam. Our test prep can help you to conquer all difficulties you may encounter. In other words, we will be your best helper.
NSE5_FSW_AD-7.6 Exam Bootcamp: https://www.prepawayexam.com/Fortinet/braindumps.NSE5_FSW_AD-7.6.ete.file.html
2026 Latest PrepAwayExam NSE5_FSW_AD-7.6 PDF Dumps and NSE5_FSW_AD-7.6 Exam Engine Free Share: https://drive.google.com/open?id=1bUWm_ONmZQHImKqd6MLj1R4CiqIbLb9U