As is known to us, perfect after-sales service for buyers is a very high value. Our NSE6_EDR_AD-7.0 guide torrent not only has the high quality and efficiency but also the perfect service system after sale. If you decide to buy our NSE6_EDR_AD-7.0 test torrent, we would like to offer you 24-hour online efficient service, you have the right to communicate with us without any worries at any time you need, and you will receive a reply, we are glad to answer your any question about our NSE6_EDR_AD-7.0 Guide Torrent. You have the right to communicate with us by online contacts or by an email. The high quality and the perfect service system after sale of our NSE6_EDR_AD-7.0 exam questions have been approbated by our local and international customers. So you can rest assured to buy.
| Section | Weight | Objectives |
|---|---|---|
| Events, Forensics, and Threat Hunting | 25% | - Threat hunting profiles and queries - Forensic analysis and incident investigation - Security event and alert analysis - Threat hunting data interpretation |
| Security Settings and Policies | 25% | - Playbooks creation and management - Fortinet Cloud Service (FCS) integration - Communication control policies - Security policies configuration |
| Integration and Security Fabric | 15% | - FortiXDR deployment and configuration - Fortinet Security Fabric integration |
| Monitoring and Troubleshooting | 10% | - Log and alert troubleshooting - Performance and issue diagnosis - System monitoring and health checks |
| FortiEDR System Architecture and Deployment | 25% | - API-based management operations - Architecture and technical positioning - Inventory management and system tools - Installation and deployment process - Multi-tenancy deployment |
>> New NSE6_EDR_AD-7.0 Study Guide <<
Because of the unremitting effort of our professional experts, our NSE6_EDR_AD-7.0 exam engine has the advantages of high quality, validity, and reliability. And the warm feedbacks from our customers all over the world prove that we are considered the most popular vendor in this career. our NSE6_EDR_AD-7.0 Study Materials are undeniable excellent products full of benefits, so they can spruce up our own image. Besides, our NSE6_EDR_AD-7.0 practice braindumps are priced reasonably, so we do not overcharge you at all.
NEW QUESTION # 18
You are asked to configure a query to run every 15 minutes, automatically searching for specific registry modifications across all endpoints. Which FortiEDR feature must you configure? (Choose one answer)
Answer: C
Explanation:
The correct answer is C.
The FortiEDR guide explains that Threat Hunting searches across endpoint activity events, including registry activity. It states that Threat Hunting can search based on attributes of files, registry keys and values, network, processes, event log, and activity event types. This fits the requirement to search for specific registry modifications across endpoints.
The guide also explains that after filtering activity events, the query can be saved and defined as a Scheduled Query. It says: "Scheduled Query: Mark this option to automate the process of detecting threats so that this query is run automatically according to the schedule that you define." It also states that a security event is automatically created in the Incidents tab when matches are detected, and notifications can be sent through email, Syslog, and other configured methods.
The guide further states that the Repeat Every/On options define the frequency and schedule when the query runs. Therefore, a 15-minute recurring query is handled through the Scheduled Query capability in Threat Hunting, not Communication Control, policy override, or a manual Playbook trigger.
Strictly speaking, the guide calls this a scheduled query under Threat Hunting saved queries, not a
"communication control rule" or "manual query." Option C is the intended answer.
=========
NEW QUESTION # 19
Refer to the exhibits.
You are attempting to move a collector into the High Security Collector Group for isolation but encounter an error in the API request as shown in the exhibit. To successfully isolate the collector, which API parameter must you correct? (Choose one answer)
Answer: A
Explanation:
The correct answer is A. Set the organization parameter to Default .
From the first exhibit, the API query result for the Collector shows:
* Collector name: Desktop-PC
* Collector group name: Engineering
* Organization: Default
* State: Running
But in the second exhibit, the API request is using:
* organization = Fortinet-Training
* collectors = Desktop-PC
* targetCollectorGroup = High Security Collector Group
That organization value is wrong. The Collector belongs to the Default organization, so the API request must reference the Collector's actual organization. Otherwise FortiEDR cannot locate or move that Collector under the organization specified in the request.
The FortiEDR guide confirms that Collector Groups are used to assign different FortiEDR policies to different Collectors, and that Collectors can be moved between groups/organizations in the Inventory workflow. In Hoster view, FortiEDR shows Collectors from all organizations and allows moving Collectors between organizations, but the organization context must match the Collector being managed.
Option B is wrong because the exhibit shows the API request is authorized; the failure is a 400 Bad Request , not an authentication failure. Option C is wrong because the endpoint shown is already a move/update operation using PUT, and the issue is not the HTTP method. Option D is wrong because Engineering is the current Collector Group. The goal is to move the Collector to High Security Collector Group , so changing the target back to Engineering would not isolate or harden the Collector.
=========
NEW QUESTION # 20
A playbook is configured with two actions: terminate process and isolate device. The terminate process action fails because the process is protected by Windows. What is the expected behavior for the second action, isolate device? (Choose one answer)
Answer: A
Explanation:
The correct answer is D .
The FortiEDR guide confirms that Playbook actions are automatic incident response actions configured under Security Settings > Playbooks and applied based on security event classification. It also confirms that actions such as Terminate Process and device isolation actions can be configured as playbook responses. For scheduled-query-triggered events, the guide states that FortiEDR can automatically apply the Playbook action assigned to the Collector Group that the triggering device belongs to.
For isolation, the guide shows that isolation actions such as Isolate device with NAC are configured under the Investigation section of Playbooks, and similar isolation actions are triggered automatically when selected for the relevant classification.
The uploaded guide does not provide a specific line saying "if terminate process fails, continue to the next action." Based on FortiEDR playbook behavior, configured actions are executed independently. A failure to terminate a protected Windows process does not automatically cancel the remaining playbook actions.
Therefore, the next configured action, isolate device , is still executed.
Options A , B , and C are wrong because the playbook does not pause for administrator intervention, does not stop merely because an email is generated, and does not cancel all remaining configured actions because one action failed.
=========
NEW QUESTION # 21
You discovered that a newly installed collector does not display on the Inventory tab in the central manager.
Which two troubleshooting steps must you perform? (Choose two answers)
Answer: A,C
Explanation:
The correct answers are B and C .
The FortiEDR 7.0.0 Administration Guide has a specific troubleshooting section named "A FortiEDR Collector does not display in the INVENTORY tab." It states that after a Collector is first launched, it registers with the FortiEDR Central Manager and appears in the Inventory tab. If it does not appear, the first checks are to confirm that the device where the Collector is installed is powered on and has Internet connectivity, and to validate that ports 8081 and 555 are available and not blocked by another third-party product.
Option B is therefore correct in the exam sense because ports 8081 and 555 must be open for FortiEDR communication. More precisely, the Collector communicates with the Aggregator on port 8081 and the Core on port 555 , not directly to the Central Manager in every architecture. The option wording says "between the collector and the central manager," which is technically loose, but the required troubleshooting item is still the port availability.
Option C is also correct because the same guide says to check that the endpoint is powered on and connected.
In practical FortiEDR troubleshooting, this includes confirming the FortiEDR Collector service/driver are running on the endpoint; otherwise the Collector cannot register or report health.
Option A is not listed in the FortiEDR guide as a required step for this issue. Option D is not the best answer because the guide says logs are generally retrieved when Fortinet Support requests them, and Collector logs can only be exported for Collectors in Running status; a newly installed Collector that does not appear in Inventory cannot normally be selected from Central Manager for log export.
NEW QUESTION # 22
Refer to the exhibit.
An event exception is shown. Which two statements about the exception are true? (Choose two answers)
Answer: A,B
Explanation:
The correct answers are C and D .
The exhibit shows an exception created/updated by FortinetCloudServices after the file Update.exe was classified as Good . This aligns with the FortiEDR Cloud Service behavior described in the guide. The guide states that once FCS is connected, it can enable Tuning , which means automated security event exception
/allowlisting. After a triggered security event is reclassified as Safe, an automated cross-environment exception can be pushed downstream and the event expires, preventing it from triggering again.
Option C is correct because the Event Exceptions window includes Triggered Rules , and the guide states that when editing an exception, the administrator can modify the Collector Groups , Destinations , Users , and the pairs of rules and processes that define the exception in the Triggered Rules area.
Option D is the Fortinet/FCS-related statement supported by the guide's FCS behavior. The guide says FCS can enable follow-up actions, including Tuning through automated exceptions and Playbook Actions , and that playbook policy remediation actions are based on the final FCS determination.
Option A is wrong because the exhibit explicitly states "All the Raw Data Items are covered." A partial exception would mean not all raw data items are covered. The guide explains that if an exception does not cover all raw data items, FortiEDR displays a different indicator and distinguishes covered from non-covered raw data items.
Option B is wrong because the exception scope in the exhibit is set to All groups , All destinations , and All users . The comment references device C8092231196, but that is not the same as saying the exception applies only to that device.
=========
NEW QUESTION # 23
......
If you want to be an excellent elites in this line, you need to get the NSE6_EDR_AD-7.0 certification, thus it can be seen through the importance of qualification examination. Only through qualification examination, has obtained the corresponding qualification certificate, we will be able to engage in related work, so the NSE6_EDR_AD-7.0 Test Torrent is to help people in a relatively short period of time a great important tool to pass the qualification test. Choose our NSE6_EDR_AD-7.0 study tool, can help users quickly analysis in the difficult point, and pass the NSE6_EDR_AD-7.0 exam successfully.
Latest NSE6_EDR_AD-7.0 Exam Testking: https://www.troytecdumps.com/NSE6_EDR_AD-7.0-troytec-exam-dumps.html