Certification JN0-364 Training & Exam JN0-364 Topic

P.S. Free & New JN0-364 dumps are available on Google Drive shared by Real4test: https://drive.google.com/open?id=11eeg8fNUQpu1_w6E8i3hAmqB8qDr-12Q

You can find that there are three versions of the JN0-364 training questions: the PDF, Software and APP online. As youIf you have more time at home, you can use the Software version of JN0-364 exam materials. If you are a person who likes to take notes, you can choose the PDF version. You can print out the PDF version of JN0-364 Practice Engine, carry it with you and read it at any time. If you are used to reading on a mobile phone, you can use our APP version.

Juniper JN0-364 Exam Syllabus Topics:

SectionObjectives
Multiprotocol Label Switching (MPLS)- Identify the concepts, operation, or functionality of MPLS CoS processing on Junos devices
  • 1. MPLS and routing tables
  • 2. RSVP
  • 3. Segment routing with MPLS
  • 4. Labels and the label information base
  • 5. End-to-end packet flow and forwarding
  • 6. MPLS packet header
  • 7. LDP
  • 8. MPLS terminology
- Demonstrate knowledge of how to configure, monitor, or troubleshoot MPLS
  • 1. MPLS forwarding
  • 2. Shortest path segment-routing LSPs
  • 3. RSVP-signaled Label-Switched Paths (LSPs)
  • 4. LDP-signaled Label-Switched Paths (LSPs)
Open Shortest Path First (OSPF)- Demonstrate knowledge of how to configure, monitor, or troubleshoot OSPF
  • 1. Troubleshooting tools
  • 2. Interfaces and neighbor
  • 3. Routing policy application
- Identify the concepts, operation, or functionality of OSPF
  • 1. Adjacencies and neighbors
  • 2. Designated router and backup designated router
  • 3. OSPF area and router types
  • 4. OSPF packet types
  • 5. Link-state database
  • 6. Router ID
  • 7. Link-state advertisement (LSA) packet type
Border Gateway Protocol (BGP)- Demonstrate knowledge of how to configure, monitor, or troubleshoot BGP
  • 1. Troubleshooting tools
  • 2. Routing policy application
  • 3. Peers and peer groups
- Identify the concepts, operation, or functionality of BGP
  • 1. IBGP and EBGP functionality and interaction
  • 2. Route selection process
  • 3. BGP basic operation
  • 4. Attributes
  • 5. BGP route reflection and confederations
  • 6. BGP message types
Layer 2 Bridging or VLANs- Demonstrate knowledge of how to configure, monitor, or troubleshoot Layer 2 bridging or VLANs
  • 1. Interfaces and ports
  • 2. IRB
  • 3. VLANs
  • 4. Provider bridging
- Identify the concepts, benefits, or functionality of VLANs
  • 1. Tagging
  • 2. Integrated Routing and Bridging (IRB)
  • 3. Port modes
- Identify the concepts, operation, or functionality of Layer 2 bridging for the Junos OS
  • 1. Frame processing
  • 2. Virtual Switches
  • 3. Provider bridging (Q-in-Q tunneling)
  • 4. Bridging elements and terminology
  • 5. Service provider switching platforms
Protocol-Independent Routing- Identify the concepts, operation, or functionality of various protocol-independent routing components
  • 1. Martian addresses
  • 2. Load balancing
  • 3. Static, aggregate, and generated routes
  • 4. Filter-based forwarding
  • 5. Routing instances, including routing information base (RIB) (also known as routing table) group
- Demonstrate knowledge of how to configure, monitor, or troubleshoot various protocol-independent routing components
  • 1. Load balancing
  • 2. Static, aggregate, and generated routes
  • 3. Filter-based forwarding
Spanning Tree Protocols- Identify the concepts, operation, or functionality of STP
  • 1. RSTP
  • 2. STP
  • 3. MSTP
  • 4. VSTP
- Demonstrate knowledge of how to configure, monitor, or troubleshoot Spanning Tree Protocols
  • 1. RSTP
  • 2. STP
  • 3. MSTP
  • 4. VSTP
IPv6- Identify the concepts, operation, or functionality of IPv6
  • 1. IPv6 over IPv4 tunneling
  • 2. Static routes
  • 3. Dynamic routing - OSPFv3, IS-IS, BGP
- Demonstrate knowledge of how to configure, monitor, or troubleshoot IPv6
Intermediate System to Intermediate System (IS-IS)- Demonstrate knowledge of how to configure, monitor, or troubleshoot IS-IS
  • 1. Troubleshooting tools
  • 2. Interfaces and adjacencies
  • 3. Routing policy application
- Identify the concepts, operation, or functionality of IS-IS
  • 1. IS-IS protocol data units (PDUs)
  • 2. Adjacencies and neighbors
  • 3. Type, length, values (TLVs)
  • 4. Designated intermediate system (DIS)
  • 5. Link-state database
  • 6. Metrics
  • 7. Levels and areas

>> Certification JN0-364 Training <<

Free PDF 2026 Juniper JN0-364 Perfect Certification Training

This means a little attention paid to JN0-364 test prep material will bring in great profits for customers, The pas rate is 98.95% for the JN0-364 exam torrent, and you can pass the exam if you choose us. Besides, free demo is available for JN0-364 PDF version, and you can have a try before buying, Privacy and security, 98 to 100 percent of former exam candidates have achieved their success by the help of our JN0-364 Practice Questions. We assure you that we will never sell users' information because it is damaging our own reputation.

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q144-Q149):

NEW QUESTION # 144
Which two statements are correct about the way that BGP propagates routes by default?
(Choose two.)

Answer: A,C

Explanation:
By default, BGP will propagate routes learned from EBGP peers to other IBGP peers. However, due to the BGP split-horizon rule, routes learned from one IBGP peer are not re-advertised to another IBGP peer. This behavior is designed to prevent routing information loops within the same AS.


NEW QUESTION # 145
What is the default route preference for an aggregate route?

Answer: D

Explanation:
In Junos OS, aggregate routes have a default route preference of 130. This preference determines how the route is compared with routes learned from other routing protocols when selecting the active route in the routing table.


NEW QUESTION # 146
In OSPF, which three fields must match between neighbors before forming an adjacency?
(Choose three.)

Answer: B,D,E

Explanation:
For OSPF neighbors to form an adjacency, certain parameters exchanged in Hello packets must match. The hello interval must be identical on both routers so they send Hello packets at the same rate. The network mask must match on broadcast and nonbroadcast networks to ensure both routers are operating on the same subnet. The dead interval must also match so both routers agree on how long to wait before declaring a neighbor down.


NEW QUESTION # 147
Exhibit:
user@R10> show configuration protocols isis
interface ge-0/0/1.0 {
point-to-point;
}
interface ge-0/0/2.0 {
point-to-point;
}
interface lo0.0;
source-packet-routing {
srgb start-label 300000 index-range 10000;
}
level 1 disable;
level 2 wide-metrics-only;
reference-bandwidth 100g;
You have a network of ten routers that have all been configured with an identical SRGB. The exhibit shows the IS-IS configuration from a router called R10. The other nine routers do not yet have an IPv4 shortest-path SR-MPLS LSP to this router. Which missing part of the configuration must you add on R10 to solve this problem?

Answer: C

Explanation:
In aSegment Routing (SR-MPLS)architecture using IS-IS as the control plane, routers exchange labels (segments) to build Label-Switched Paths (LSPs) without the need for traditional signaling protocols like LDP or RSVP. According to Juniper Networks technical documentation, for a router to be reachable via a shortest- path LSP from other nodes in the network, it must advertise aPrefix Segment Identifier (Prefix SID).
A specific type of Prefix SID is theNode SID, which is assigned to a loopback address (typically lo0.0) to uniquely identify the router within the SR domain. In the provided exhibit, routerR10has been configured with aSegment Routing Global Block (SRGB)starting at label 300000. This configuration tells the router which label range to use for global segments, but it does not automatically assign a label to its own loopback interface.
Without aNode SIDconfiguration, R10 is not telling its neighbors which specific index or label within that SRGB corresponds to its own address. Consequently, the other nine routers in the IS-IS area can calculate the shortest path to R10 using standard SPF, but they cannot perform the "label-binding" necessary to push an SR- MPLS label onto the packets.
To solve this, a Node SID must be explicitly configured under the loopback interface within the IS-IS protocol hierarchy, such as:
set protocols isis interface lo0.0 level 2 ipv4-node-sid index <value>
Analysis of incorrect options:
* Binding SID (Option A):This is used to encapsulate or steer traffic into a specific policy or tunnel (like a TE-LSP) and is not required for basic shortest-path reachability.
* Adjacency SID (Option B):These are generated automatically by Junos for each link and represent a specific local hop; they are not used for global "shortest-path" forwarding to a distant node.
* BGP Prefix SID (Option C):This is used for BGP Egress Peer Engineering (EPE) or prefix advertisement via BGP, which is not relevant for building the underlying IS-IS SR-MPLS transport.
Therefore, configuring anexplicit IPv4 node SIDis the mandatory step to enable the rest of the network to build a shortest-path SR-LSP toward R10.


NEW QUESTION # 148
You are configuring BGP for IPv6 operations.
In this scenario, which two statements are correct? (Choose two.)

Answer: B

Explanation:
BGP uses a router ID that is always a 32-bit value, even when BGP is operating for IPv6 address families.
BGP supports both 16-bit and 32-bit Autonomous System Numbers through the use of four-byte ASN extensions, allowing ASNs to be represented using a 32-bit value.


NEW QUESTION # 149
......

After seeing you struggle, Real4test has come up with an idea to provide you with the actual and updated Juniper JN0-364 practice questions so you can pass the JN0-364 certification test on the first try and your hard work doesn't go to waste. Updated JN0-364 Exam Dumps are essential to pass the Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) certification exam so you can advance your career in the technology industry and get a job in a good company that pays you well.

Exam JN0-364 Topic: https://www.real4test.com/JN0-364_real-exam.html

P.S. Free 2026 Juniper JN0-364 dumps are available on Google Drive shared by Real4test: https://drive.google.com/open?id=11eeg8fNUQpu1_w6E8i3hAmqB8qDr-12Q