DOWNLOAD the newest PassTestking NSE5_FNC_AD_7.6 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1jGnxfUwcG1jxMWBRD9ilDGgGTP1f3Lxb
In today's society, many people are busy every day and they think about changing their status of profession. They want to improve their competitiveness in the labor market, but they are worried that it is not easy to obtain the certification of NSE5_FNC_AD_7.6. Our study tool can meet your needs. Once you use our NSE5_FNC_AD_7.6 exam materials, you don't have to worry about consuming too much time, because high efficiency is our great advantage. In a matter of seconds, you will receive an assessment report based on each question you have practiced on our NSE5_FNC_AD_7.6 test material. The final result will show you the correct and wrong answers so that you can understand your learning ability so that you can arrange the learning tasks properly and focus on the targeted learning tasks with NSE5_FNC_AD_7.6 test questions. So you can understand the wrong places and deepen the impression of them to avoid making the same mistake again.
| Certification Vendor: | Fortinet |
|---|---|
| Exam Name: | Fortinet NSE 5 - FortiNAC-F 7.6 Administrator |
| Exam Number: | NSE5_FNC_AD_7.6 |
| Related Certifications: | Fortinet Certified Professional (FCP) in Secure Networking Fortinet NSE 5 |
| Exam Price: | $200 USD |
| Passing Score: | Pass/Fail, not publicly disclosed |
| Exam Duration: | 65 minutes |
| Available Languages: | English |
| Certificate Validity Period: | 2 years |
| Real Exam Qty: | 30–35 |
| Exam Format: | Scenario-based questions, Multiple Choice, Multiple Select |
| Recommended Training: | Fortinet NSE 5 FortiNAC-F 7.6 Official Training |
| Exam Registration: | Pearson VUE Registration |
| Sample Questions: | Fortinet NSE5_FNC_AD_7.6 Sample Questions |
| Exam Way: | Online proctored or onsite testing via Pearson VUE |
| Pre Condition: | No mandatory prerequisites; recommended knowledge of network security concepts, Fortinet products and enterprise network environments |
| Official Syllabus URL: | https://training.fortinet.com/local/staticpage/view.php?page=fortinac_administrator_exam |
>> New NSE5_FNC_AD_7.6 Exam Notes <<
The Fortinet NSE 5 - FortiNAC-F 7.6 Administrator (NSE5_FNC_AD_7.6) certification is a valuable credential that assists you to enhance your existing skills and experience. By doing this you can stay updated and competitive in the market and achieve your career objectives in a short time period. To do this you just need to pass the one Fortinet NSE 5 - FortiNAC-F 7.6 Administrator exam. Are you ready for this? If yes then enroll in Fortinet NSE5_FNC_AD_7.6 Exam Dumps and start this journey with PassTestking. The PassTestking offers real, valid, and updated NSE5_FNC_AD_7.6 Questions that surely will help you in exam preparation and enable you to pass the challenging NSE5_FNC_AD_7.6 exam with flying colors.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 29
A user was attempting to register their host through the registration captive portal. After successfully registering, the host remained in the registration VLAN. Which two conditions would cause this behavior? (Choose two.)
Answer: A,D
Explanation:
The process of moving a host from a Registration VLAN to a Production VLAN (Access VLAN) is a fundamental part of the FortiNAC-F "VLAN steering" workflow. When a host successfully registers via the captive portal, FortiNAC-F evaluates its Network Access Policies to determine the correct VLAN. If the host remains stuck in the Registration VLAN despite a successful registration, it is typically due to port-level restrictions or the presence of other unregistered devices.
The two most common reasons for this behavior as per the documentation are:
The port default VLAN is the same as the Registration VLAN: If the "Default VLAN" field in the switch port's model configuration is set to the same ID as the Registration VLAN, the port will not change state because FortiNAC-F believes it is already in its "normal" or "forced" state.
There is another unregistered host on the same port: FortiNAC-F maintains the security posture of the physical port. If multiple hosts are connected to a single port (e.g., via a hub or unmanaged switch) and at least one host remains "Rogue" (unregistered), FortiNAC-F will generally keep the entire port in the isolation/registration VLAN to prevent the unregistered host from gaining unauthorized access to the production network.
Issues with agents (A, B) typically prevent a host from completing compliance or registration but do not usually result in a "stuck" status after registration has already been marked as successful in the system.
"If a port is identified as having Multiple Hosts, and those hosts require different levels of access, FortiNAC remains in the most restrictive state (Registration or Isolation) until all hosts on that port are authorized... Additionally, verify the Default VLAN setting for the port; if the Default VLAN and Registration VLAN match, the system will not trigger a VLAN change upon registration." - FortiNAC-F Administration Guide: Troubleshooting Host Management.
NEW QUESTION # 30
Refer to the exhibit.
An administrator has configured the DHCP scope for a registration isolation network, but the isolation process isn't working.
What is the problem with the configuration?
Answer: D
Explanation:
In a FortiNAC-F deployment, the configuration of the DHCP scope for isolation networks (Registration, Remediation, etc.) must perfectly align with the underlying network infrastructure to ensure that isolated hosts can communicate with the FortiNAC appliance. In the provided exhibits, there is a clear discrepancy between the DHCP configuration and the Network Topology.
As shown in the "Network Topology" exhibit, the Registration Network resides on a router interface (or sub-interface) with the IP address 192.168.180.1. This address represents the default gateway for any host placed into the Registration VLAN. However, the "DHCP configuration" exhibit shows the scope "REG-ScopeOne" configured with a Gateway of 10.0.1.254. This 10.0.1.254 address belongs to the management/service network (port2 of FortiNAC), not the registration subnet. If a host in the Registration VLAN receives this incorrect gateway via DHCP, it will attempt to send all off-link traffic to an unreachable IP, preventing it from loading the Captive Portal or communicating with the FortiNAC server.
According to the FortiNAC-F Configuration Wizard Reference, when defining a Layer 3 network scope, the "Gateway" field must contain the IP address of the router interface that acts as the gateway for that specific isolation VLAN. The FortiNAC appliance itself usually sits on a different subnet, and traffic is directed to it via the router's DHCP Relay (IP Helper) and DNS redirection.
"When configuring scopes for a Layer 3 network, the Gateway value must be the IP address of the router interface for that subnet. This allows the host to reach its local gateway to route traffic. If the gateway is misconfigured, the host will be unable to reach the FortiNAC eth1/port2 interface for registration... Ensure the Gateway matches the network topology for the isolation VLAN." - FortiNAC-F Configuration Wizard Reference Manual: DHCP Scopes.
NEW QUESTION # 31
Two FortiNAC-F devices have been configured as a 1 + 1 HA pair. The primary server went offline and a successful failover to the secondary has occurred. What happens if the primary server comes back online?
Answer: C
Explanation:
The correct answer is A . In a FortiNAC-F 1+1 HA deployment, failover from primary to secondary is automatic, but failback to the primary is not automatic . The study guide states that if the primary device or its network connectivity fails, the secondary assumes control automatically, but restoration of a failed-over HA deployment is a manual administrator-driven process. It further explains that after the cause of the failover is resolved, the administrator must use the Resume Control button to transfer control back to the primary server.
That means when the primary comes back online, it does not immediately take over again. The pair can resume HA communication, but the secondary remains the in-control node until an administrator deliberately returns control to the primary. Option B is wrong because FortiNAC-F 1+1 HA is active-passive, not load- balanced. Option C is wrong because the restored primary does not power itself down for maintenance.
Option D is a trap: five failed heartbeats are used in failure detection and gateway validation logic, not as an automatic failback timer. The exam point is simple: automatic failover, manual failback .
NEW QUESTION # 32
Refer to the exhibit.
What would FortiNAC-F generate if only one of the security fitters is satisfied?
Answer: C
Explanation:
In FortiNAC-F, Security Triggers are used to identify specific security-related activities based on incoming data such as Syslog messages or SNMP traps from external security devices (like a FortiGate or an IDS). These triggers act as a filtering mechanism to determine if an incoming notification should be escalated from a standard system event to a Security Event.
According to the FortiNAC-F Administrator Guide and relevant training materials for versions 7.2 and 7.4, the Filter Match setting is the critical logic gate for this process. As seen in the exhibit, the "Filter Match" configuration is set to "All". This means that for the Security Trigger named "Infected File Detected" to "fire" and generate a Security Event or a subsequent Security Alarm, every single filter listed in the Security Filters table must be satisfied simultaneously by the incoming data.
In the provided exhibit, there are two filters: one looking for the Vendor "Fortinet" and another looking for the Sub Type "virus". If only one of these filters is satisfied (for example, a message from Fortinet that does not contain the "virus" subtype), the logic for the Security Trigger is not met. Consequently, FortiNAC-F does not escalate the notification. Instead, it processes the incoming data as a Normal Event, which is recorded in the Event Log but does not trigger the automated security response workflows associated with security alarms.
"The Filter Match option defines the logic used when multiple filters are defined. If 'All' is selected, then all filter criteria must be met in order for the trigger to fire and a Security Event to be generated. If the criteria are not met, the incoming data is processed as a normal event. If 'Any' is selected, the trigger fires if at least one of the filters matches." - FortiNAC-F Administration Guide: Security Triggers Section.
NEW QUESTION # 33
Refer to the exhibit.
When a contractor account is created using this template, which value is set in the accounts Role field?
Answer: B
Explanation:
The correct answer is A . In the exhibit, the Template Name is Engineer-Contractor , and the selected Role option is Use a unique Role based on this template name . That means FortiNAC-F uses the template name itself as the role value for any account created from this guest/contractor template. The study guide confirms this behavior: by default, the Role field is populated with the template name, although the administrator can alternatively select from an existing role list. It also states that the role value in the guest and contractor template populates the Role field of any account created from that template.
Option B , Eng-Contractor , is wrong because that value is entered in the Security and Access Value field, not the Role field. That value can still be used in user/host profiles or policies, but it does not populate the account Role field. Option C , Contractor , is only the Visitor Type , which controls the kind of guest
/contractor account and associated icon behavior. Option D , Accounting Contractor , is visible in the disabled Select Role dropdown, but that option is not selected because the template is configured to use a unique role based on the template name.
NEW QUESTION # 34
......
Valid NSE5_FNC_AD_7.6 Test Discount: https://www.passtestking.com/Fortinet/NSE5_FNC_AD_7.6-practice-exam-dumps.html
BTW, DOWNLOAD part of PassTestking NSE5_FNC_AD_7.6 dumps from Cloud Storage: https://drive.google.com/open?id=1jGnxfUwcG1jxMWBRD9ilDGgGTP1f3Lxb