P.S. Free & New SRAN-Radio-Network-Performance-Optimization dumps are available on Google Drive shared by Lead1Pass: https://drive.google.com/open?id=13ThgItT4HZVEK6vrYbPZU6xY4bvjFJMQ
Just as an old saying goes, it is better to gain a skill than to be rich. Contemporarily, competence far outweighs family backgrounds and academic degrees. One of the significant factors to judge whether one is competent or not is his or her SRAN-Radio-Network-Performance-Optimization certificates. Generally speaking, SRAN-Radio-Network-Performance-Optimization certificates function as the fundamental requirement when a company needs to increase manpower in its start-up stage. In this respect, our SRAN-Radio-Network-Performance-Optimization practice materials can satisfy your demands if you are now in preparation for a SRAN-Radio-Network-Performance-Optimization certificate.
| Section | Weight | Objectives |
|---|---|---|
| Mobility and Handover Optimization | 20% | - Inter-RAT mobility and optimization - Handover parameters and algorithms - Mobility robustness and optimization |
| Advanced Optimization and SON Features | 10% | - Energy saving and advanced features - Self-Organizing Networks (SON) use cases and optimization |
| SRAN Performance Optimization Fundamentals | 25% | - Network performance monitoring and analysis tools - Performance optimization principles and methodology - Key performance indicators (KPIs) definition and measurement |
| Coverage and Capacity Optimization | 30% | - Interference analysis and mitigation techniques - Capacity planning, load balancing and optimization - Coverage analysis, tuning and optimization |
| Quality of Service and Resource Management | 15% | - QoS parameters, scheduling and admission control - Radio resource management and optimization |
>> Nokia SRAN-Radio-Network-Performance-Optimization Exam Tests <<
The client only needs 20-30 hours to learn our SRAN-Radio-Network-Performance-Optimization learning questions and then they can attend the test. Most people may devote their main energy and time to their jobs, learning or other important things and can’t spare much time to prepare for the test. But if clients buy our SRAN-Radio-Network-Performance-Optimization Training Materials they can not only do their jobs or learning well but also pass the test smoothly and easily because they only need to spare little time to learn and prepare for the SRAN-Radio-Network-Performance-Optimization test.
NEW QUESTION # 13
In a 5G cell , the following parameter has been modified: lowLatencyReservation = 15 .
Which percentage of UEs will be reallocated to a higher SR periodicity group whenever the threshold for moving to a higher SR periodicity group is reached?
Answer: D
Explanation:
The correct answer is C .
In 5G uplink scheduling, SR , or Scheduling Request , is used by the UE to request uplink resources when it has data to send. SR periodicity affects uplink latency and PUCCH capacity: shorter SR periodicity gives lower latency but consumes more control-channel resources, while longer SR periodicity saves resources but increases delay.
The parameter lowLatencyReservation = 15 means 15% of the UE/resource share is reserved for the low- latency SR periodicity group. When the load threshold is reached, the remaining portion can be moved to a higher SR periodicity group.
Calculation:
100% # 15% = 85%
So the percentage of UEs that can be reallocated to a higher SR periodicity group is:
0.85 , or 85% .
NEW QUESTION # 14
When selecting an LTE anchor layer for EN-DC , why is it important to check 3GPP band combinations ?
Answer: D
Explanation:
The correct answer is B .
In 5G NSA EN-DC , the UE connects to LTE as the Master Cell Group , or anchor, and NR as the Secondary Cell Group . Not every LTE band can be paired with every NR band. The supported LTE-NR combinations are defined by 3GPP band-combination rules and must also be supported by the UE chipset and device capability.
For example, an operator may have LTE Band 3, Band 7, or Band 20 and NR n78, but only certain LTE-NR combinations may be valid for EN-DC. If the selected LTE anchor band is not supported in combination with the NR band, the UE will not be able to establish EN-DC even if LTE and NR coverage both exist.
Option C is not correct because dual-uplink support depends on UE capability and specific band-combination support; it cannot be guaranteed for all UE models. Option A and D are unrelated to the main purpose of checking 3GPP band combinations.
So the correct reason is:
To ensure that LTE and NR bands are compatible and allowed as EN-DC pairs.
NEW QUESTION # 15
What is the mandatory prerequisite to implement DSS , or Dynamic Spectrum Sharing ?
Answer: C
Explanation:
The correct answer is D .
DSS allows LTE and 5G NR to share the same spectrum dynamically , instead of requiring a separate dedicated NR carrier. Therefore, dedicated NR spectrum is not mandatory. DSS is also not limited to TDD only; it is commonly used in FDD spectrum refarming scenarios as well. Public RAN references describe DSS as a mechanism where LTE and NR coexist in the same frequency band and share spectrum dynamically.
From an SRAN architecture point of view, the mandatory deployment condition is that the radio platform must support LTE and NR coexistence on the same radio resources. That requires RF module sharing or a DSS-capable shared radio configuration.
So the correct prerequisite is:
RF module sharing.
NEW QUESTION # 16
Which port must be opened in NetAct for the connection from TraceSynthesis to NetAct?
Answer: C
Explanation:
The correct answer is B .
The connection from TraceSynthesis to NetAct is typically based on secure web/API communication, which uses HTTPS . The standard HTTPS port is 443 . Therefore, port 443 must be opened in NetAct/firewall rules to allow TraceSynthesis to communicate with NetAct.
The other options are not the best answer:
8443 is often used as an alternative HTTPS/application-server port, but it is not the standard answer here.
22 is used for SSH, mainly for secure shell access or file transfer.
8080 is commonly used for unsecured HTTP or proxy/application access, not the secure NetAct connection expected here.
So the required port is:
443.
NEW QUESTION # 17
In a high-mobility network, the maximum cell size must be restricted to 33 km . Which PRACH format and restricted-set type should be used?
Answer: B
NEW QUESTION # 18
......
Our SRAN-Radio-Network-Performance-Optimization exam materials have plenty of advantages. For example, in order to meet the needs of different groups of people, we provide customers with three different versions of SRAN-Radio-Network-Performance-Optimization actual exam, which contain the same questions and answers. They are the versions of the PDF, Software and APP online. You can choose the one which is your best suit of our SRAN-Radio-Network-Performance-Optimization Study Materials according to your study habits.
SRAN-Radio-Network-Performance-Optimization Reliable Exam Labs: https://www.lead1pass.com/Nokia/SRAN-Radio-Network-Performance-Optimization-practice-exam-dumps.html
BTW, DOWNLOAD part of Lead1Pass SRAN-Radio-Network-Performance-Optimization dumps from Cloud Storage: https://drive.google.com/open?id=13ThgItT4HZVEK6vrYbPZU6xY4bvjFJMQ