P.S. Free 2026 F5 F5CAB3 dumps are available on Google Drive shared by Itexamguide: https://drive.google.com/open?id=1u5mamZjfL1t_6E4m_tZoUb4QJ27U9U__
You don't have to install excessive plugins or software to attempt this F5 F5CAB3 practice test. This version of F5CAB3 practice exam is supported by these operating systems: Windows, Mac, iOS, Linux, and Android. It is a customizable F5 F5CAB3 Practice Exam. It means takers can change its duration and F5CAB3 practice test question numbers. The actual F5 F5CAB3 exam environment that the practice exam creates is beneficial to counter BIG-IP Administration Data Plane Configuration (F5CAB3) exam anxiety.
| Certification Vendor: | F5 Networks |
|---|---|
| Exam Name: | F5 Certified BIG-IP Administrator: Data Plane Configuration |
| Exam Number: | F5CAB3 |
| Exam Price: | $160 USD |
| Real Exam Qty: | 60-80 |
| Available Languages: | English |
| Certificate Validity Period: | 2 years |
| Related Certifications: | F5 Certified Specialist, Data Plane Configuration F5 Certified BIG-IP Administrator (F5-CA) |
| Exam Duration: | 120 minutes |
| Passing Score: | 247 out of 350 (approximately 70%) |
| Exam Format: | Build List, Multiple Select, Multiple Choice |
| Sample Questions: | F5 F5CAB3 Sample Questions |
| Exam Way: | Online proctored or test center |
| Pre Condition: | Recommended: F5 Certified Administrator certification or equivalent experience with BIG-IP LTM |
| Official Syllabus URL: | https://www.f5.com/go/certification |
Time is flying and the exam date is coming along, which is sort of intimidating considering your status of review process. The more efficient the materials you get, the higher standard you will be among competitors. So, high quality and high accuracy rate F5CAB3 practice materials are your ideal choice this time. By adding all important points into F5CAB3 practice materials with attached services supporting your access of the newest and trendiest knowledge, our F5CAB3 practice materials are quite suitable for you right now.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
NEW QUESTION # 16
A BIG-IP Administrator uses backend servers to host multiple services per server. There are multiple virtual servers and pools defined, referencing the same backend servers.
Which load balancing algorithm is most appropriate to have an equal number of connections on each backend server? (Choose one answer)
Answer: D
Explanation:
In this scenario, each backend node (server) hosts multiple services and is referenced by multiple pools and virtual servers. The goal is to ensure an equal number of total connections per backend server, regardless of how many pool members (services/ports) exist on that server.
According to the BIG-IP Administration: Data Plane Configuration documentation:
* Least Connections (node) tracks the total number of active connections to a node across all pool members and services.
* This algorithm ensures load distribution is balanced at the server level, not just at the individual service (member) level.
* It is specifically recommended when:
* Multiple pool members exist on the same backend server
* Multiple virtual servers reference the same backend servers
Why the other options are incorrect:
* B. Predictive (member)Predictive algorithms are advanced and traffic-pattern based, but they operate at the member level and do not guarantee equal connections per server.
* C. Least Connections (member)This balances connections per pool member, which can overload a server hosting multiple members while still appearing "balanced" per member.
* D. Predictive (node)Although node-aware, predictive algorithms are less deterministic and not the best choice when strict equality of connections is required.
Correct Resolution:
Using Least Connections (node) ensures that each backend server carries an equal connection load across all services and pools.
NEW QUESTION # 17
A virtual server is configured to offload SSL from a pool of backend servers. When users connect to the virtual server, they successfully establish an SSL connection but no content is displayed. A packet trace performed on the server shows that the server receives and responds to the request. What should a BIG-IP Administrator do to resolve the problem?
Answer: C
Explanation:
This scenario describes a classic routing issue often encountered during SSL offload deployments. The fact that an SSL connection is established indicates the Client SSL profile is working correctly. The packet trace showing the server "receives and responds" to the request is the most critical diagnostic clue.
When a BIG-IP receives traffic, it typically passes the client's original source IP address to the backend server. If the backend server's default gateway is not the BIG-IP (a common "one-arm" network topology), the server will attempt to send its response directly back to the client's IP via its own default router. The client's browser will reject this response because it expects traffic to come from the Virtual Server's IP, not the backend server's IP.
To resolve this, the administrator must enable SNAT (Source Address Translation), typically using SNAT Automap. When SNAT is enabled, the BIG-IP replaces the client's original source IP with one of its own Self IPs before forwarding the request to the server. Because the source of the packet is now the BIG-IP, the backend server is forced to send its response back to the BIG-IP. The BIG-IP then receives the response, translates it back, and delivers the content to the user. Option A is unnecessary if the servers are expecting plain-text traffic after the BIG-IP performs offload. Option D would only worsen the existing routing discrepancy.
NEW QUESTION # 18
Refer to the exhibit.
A BIG-IP Administrator configures a new VLAN on an HA pair of devices that does NOT yet have any traffic. This action causes the assigned traffic group to fail over to the standby device. Which VLAN setting should be changed to prevent this issue?
Answer: D
Explanation:
The exhibit shows the advanced configuration of a VLAN where the Fail-safe option is checked. VLAN Fail- safe is a high-availability feature used to monitor network connectivity on a specific VLAN. When enabled, the BIG-IP system monitors the VLAN for network traffic. If the system does not detect any " useful " traffic on the VLAN within the specified Fail-safe Timeout (which is 90 seconds in the exhibit), it attempts to generate traffic by pinging the default gateway or other devices. If it still detects no traffic, the BIG-IP concludes that the VLAN is unreachable or the network interface has failed, and it triggers a " Fail-safe Action " -in this case, " Reboot " or a failover to the peer device in the HA group.
Because the administrator has just created a new VLAN that " does NOT yet have any traffic, " the Fail-safe mechanism triggers immediately after the 90-second timeout period. Since no devices are yet communicating on this VLAN, the BIG-IP incorrectly assumes there is a hardware or cabling failure and forces a failover to ensure the standby device (which might have better connectivity) takes over. To prevent this unwanted failover, the administrator should uncheck the Fail-safe box for that specific VLAN until the VLAN is fully populated with active nodes and regular traffic. Once the application is live and traffic is flowing, Fail-safe can be re-enabled to provide an additional layer of redundancy. Auto Last Hop (Option A) and Source Check (Option B) are routing and security features that do not trigger HA failover events.
NEW QUESTION # 19
A BIG-IP Administrator is setting up a new BIG-IP device. The network administrator reports that the interface has an incompatible media speed. The BIG-IP Administrator needs to change this setting manually.
From which location should the BIG-IP Administrator perform this task?
Answer: C
Explanation:
Standard BIG-IP administration dictates that hardware-level physical attributes are managed within the Network section of the configuration. When a network switch and a BIG-IP fail to successfully negotiate speed and duplex settings (Auto-Negotiation), it can result in CRC errors, late collisions, or a total lack of link. To resolve this manually, the administrator must navigate to the Configuration Utility (GUI) and go to Network > Interfaces.
Within the Interfaces list, the administrator can select the specific physical port (e.g., 1.1 or 1.2) and modify its properties. By default, the media speed is set to "Auto," but the drop-down menu allows for manual selection of specific speeds (e.g., 100Mb/s, 1Gb/s, 10Gb/s) and duplex settings (Full or Half). While these changes can also be made via the TMOS Shell (TMSH) (Option B) using the modify net interface command, the question asks for the standard location, which in most administrative contexts refers to the primary GUI path. System > Configuration (Option D) is used for global device settings like NTP, DNS, and licensing, not for interface-specific physical layer parameters. The Front Console (Option A), referring to the LCD panel on physical appliances, is primarily used for initial management IP setup and viewing system alerts, but does not provide the granular interface configuration required for media speed adjustments.
NEW QUESTION # 20
What is the status of a pool member when manual resume is enabled and a health check first fails and then passes?
Answer: C
Explanation:
With manual resume enabled, BIG-IP does not automatically return a pool member to service after recovery. The member remains offline until manually re-enabled.
NEW QUESTION # 21
......
F5CAB3 Demo Test: https://www.itexamguide.com/F5CAB3_braindumps.html
DOWNLOAD the newest Itexamguide F5CAB3 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1u5mamZjfL1t_6E4m_tZoUb4QJ27U9U__