P.S. Free & New JN0-683 dumps are available on Google Drive shared by ExamCost: https://drive.google.com/open?id=1rfLwVEiW4KYqeda-OQ-yXrnQy7hYvdpW
Maybe you are busy with working every day without the help of our JN0-683 learning materials. The heavy work leaves you with no time to attend to study. It doesn't matter. Our JN0-683 learning materials can help you squeeze your time out and allow you to improve your knowledge and skills while having work experience. And there are three versions of our JN0-683 Exam Questions for you to choose according to your interests and hobbies.
| Section | Objectives |
|---|---|
| EVPN-VXLAN Signaling | - EVPN Concepts
|
| Data Center Multitenancy and Security | - Architectures
|
| VXLAN | - VXLAN Concepts
|
| Data Center Interconnect | - DCI Concepts
|
| Data Center Deployment and Management | - Data Center Deployment Concepts
|
| Layer 3 Fabrics | - IP Fabric Concepts
|
>> Latest JN0-683 Exam Cram <<
If you buy our Software version of the JN0-683 study questions, you can enjoy the similar real exam environment for that this version has the advantage of simulating the real exam. In addition, the software version of our JN0-683 learning guide is not limited to the number of the computer. As long as you use it on the Windows system, then you can enjoy the convenience of this version brings. So do not hesitate and buy our Software version of JN0-683 Preparation exam, you will benefit a lot from it.
NEW QUESTION # 28
You implement a MAC-VRF routing instance with a VLAN-aware service type configured with multiple VLAN IDs. Which statement is correct about this implementation?
Answer: C
Explanation:
A MAC-VRF with a VLAN-aware service type uses a single bridging instance for the routing instance, so all VLANs configured under that MAC-VRF share the same bridge table while still maintaining per-VLAN separation for forwarding.
NEW QUESTION # 29
Exhibit.
Connections between hosts connected to Leaf-1 and Leaf-2 are not working correctly.
Answer: A,E
Explanation:
* Issue Analysis:
* The problem in the exhibit suggests a mismatch in configuration parameters between Leaf-1 and Leaf-2, leading to communication issues between hosts connected to these leaf devices.
* Configuration Mismatches:
* Service-ID:Leaf-1 has service-id 1 configured, while Leaf-2 does not have this parameter. For consistency and proper operation, the service-id should be the same across both leaf devices.
* VRF Target:Leaf-1 is configured with vrf-target target:65000:1, while Leaf-2 is configured with vrf-target target:65000:2. To allow proper VRF import/export between the two leafs, these should match.
* Corrective Actions:
* C. Configure the set switch-options vrf-target target:65000:1 parameter on Leaf-2:This aligns the VRF targets between the two leaf devices, ensuring they can correctly import and export routes.
* E. Configure the set switch-options service-id 1 parameter on Leaf-2:This ensures that both Leaf-1 and Leaf-2 use the same service ID, which is necessary for consistency in the EVPN- VXLAN setup.
Data Center References:
* Correct configuration of VRF targets and service IDs is critical in EVPN-VXLAN setups to ensure that routes and services are correctly shared and recognized between different devices in the network fabric.
NEW QUESTION # 30
You are asked to configure active probes to track and monitor reachability across the network and investigate network issues. In this scenario, which feature would accomplish this task?
Answer: A
Explanation:
RPM (Real-Time Performance Monitoring) uses active probes such as ICMP or UDP to measure reachability, latency, jitter, and packet loss across the network. It actively generates test traffic, making it suitable for tracking connectivity and troubleshooting network performance issues.
NEW QUESTION # 31
Exhibit.
You want to enable the border leaf device to send Type 5 routes of local networks to the border leaf device in another data center. What must be changed to the configuration shown in the exhibit to satisfy this requirement?
Answer: C
Explanation:
In this scenario, you want the border leaf device to advertise Type 5 EVPN routes to another border leaf in a different data center. Type 5 routes in EVPN are used to advertise IP prefixes, which means that for proper route advertisement, you need to configure the correct settings within the evpn hierarchy.
Step-by-Step Analysis:
* Understanding EVPN Type 5 Routes:
* EVPN Type 5 routes are used to advertise IP prefixes across EVPN instances, which allow different data centers or networks to exchange routing information effectively.
* VRF Target Setting:
* The vrf-target configuration is crucial because it defines the export and import policies for the VRF within the EVPN instance. For EVPN Type 5 routes to be advertised to other border leaf devices, the vrf-target needs to be correctly configured under the evpn hierarchy, not just within the routing instance.
Command to solve this:
move vrf-target target:65000:1 to evpn
* Other Options:
* Option B:Adding a VLAN configuration would not address the requirement to advertise Type 5 routes.
* Option C:Adding VXLAN encapsulation may be necessary for other scenarios but does not directly address the Type 5 route advertisement.
* Option D:Changing the route-distinguisher will differentiate routes but does not impact the advertisement of Type 5 routes to other data centers.
By moving the vrf-target to the evpn hierarchy, you enable the proper route advertisement, ensuring that the Type 5 routes for local networks are shared with other data center border leaf devices. This is aligned with best practices for multi-data center EVPN implementations, which emphasize the correct placement of routing policies within the EVPN configuration.
NEW QUESTION # 32
Which statement correctly describes the role of EVPN Type 3 routes?
Answer: B
Explanation:
EVPN Type 3 routes, known as Inclusive Multicast Ethernet Tag routes, are used to build the flooding tree for broadcast, unknown unicast, and multicast traffic within a given VNI. Each VTEP advertises a Type 3 route indicating its participation in a VNI, allowing remote VTEPs to learn where to send BUM traffic when using ingress replication instead of a multicast-based underlay.
NEW QUESTION # 33
......
ExamCost offers highly designed Juniper JN0-683 exam questions and online JN0-683 practice test engine to help you successfully clear the Juniper exam. Their study materials cover all the basic to advanced required JN0-683 Exam Questions material that you need to know to pass the JN0-683 Exam. These two simple, easy, and accessible learning formats will boost your confidence.
JN0-683 Dump: https://www.examcost.com/JN0-683-practice-exam.html
BONUS!!! Download part of ExamCost JN0-683 dumps for free: https://drive.google.com/open?id=1rfLwVEiW4KYqeda-OQ-yXrnQy7hYvdpW