This pdf covers all of the 300-110 Exam Questions from the previous exams as well as those that will appear in the upcoming Cisco 300-110 exam. The 300-110 PDF exam questions are compiled according to the latest exam syllabus to ensure your success. The Cisco 300-110 PDF exam questions are also printable to make handy notes.
| Section | Objectives |
|---|---|
| Wireless Security Design | - WPA2/WPA3 enterprise security design - Guest access and segmentation strategies - 802.1X authentication and RADIUS integration |
| High Availability and Performance Optimization | - Load balancing and RF optimization - Redundancy design for controllers and APs |
| Troubleshooting and Validation | - Wireless performance troubleshooting methodologies - Validation tools and post-deployment testing |
| RF Fundamentals and Design Principles | - Antenna types and placement strategies - Channel planning and interference mitigation - RF behavior and propagation |
| Cisco Wireless Architecture | - Controller-based architecture (WLC) - Lightweight Access Point (LAP) deployment models - Mobility groups and roaming design |
| Wireless Site Survey and Requirements Analysis | - Physical environment assessment and constraints - Business and technical requirements gathering - Coverage and capacity planning |
300-110 Exam is a Cisco certification exam and IT professionals who have passed some Cisco certification exams are popular in IT industry. So more and more people participate in 300-110 certification exam, but 300-110 certification exam is not very simple. If you do not have participated in a professional specialized training course, you need to spend a lot of time and effort to prepare for the exam. But now BootcampPDF can help you save a lot of your precious time and energy.
NEW QUESTION # 16
The wireless team must configure a new voice SSID for optimized roaming across multiple WLCs with Cisco 8821 phones. Which two settings accomplish this goal? (Choose two.)
Answer: C,D
Explanation:
For optimized roaming across multiple Wireless LAN Controllers (WLCs) with Cisco 8821 IP phones, two critical settings must be configured. First, configuring mobility groups between WLCs (Option A) allows for seamless inter-controller roaming by establishing mobility tunnels between controllers, enabling them to share client security context, preventing re-authentication when a phone roams from an AP on one WLC to an AP on another. Second, using Cisco Centralized Key Management (CCKM) for authentication (Option B) reduces the time required for re- authentication during roaming from a full 802.1X exchange to a single-message re-key process.
CCKM stores the wireless security keys at the WLC level, enabling rapid key re-derivation during roaming without contacting the RADIUS server.
NEW QUESTION # 17
An engineer is designing a high-density WLAN and wants to reduce the airtime consumed by each client transmission. Which configuration should be included in the RF profile?
Answer: B
Explanation:
A frame transmitted at a low data rate occupies the channel far longer than the same frame sent at a high rate, and because the medium is shared, a single distant client transmitting at 1 Mbps consumes airtime that every other client on that channel must wait through. Disabling the low rates and raising the mandatory minimum forces clients to either connect at an efficient rate or roam to a closer AP, which shrinks the effective cell size, reduces co-channel interference, and increases aggregate capacity - all of which are desirable in a dense design where APs are closely spaced. Management and broadcast frames are also sent at the lowest mandatory rate, so raising that floor reduces beacon and broadcast overhead as well. Leaving all rates enabled or setting 1 Mbps as mandatory produces oversized cells with heavy airtime consumption, and restricting the 2.4 GHz radio to 802.11b rates would be the worst possible outcome for efficiency.
NEW QUESTION # 18
A wireless network consists of two IOS XE controllers installed in a data center, 9100 series APs, and a corporate and a guest WLAN. The customer must have a high availability pair of two Cisco WLCs for the client SSO. Which two design approaches must the engineer take to meet the requirement? (Choose two.)
Answer: A,C
Explanation:
Configuring a high availability SSO pair on Cisco Catalyst 9800 IOS XE WLCs has specific technical prerequisites that must be satisfied for the SSO relationship to form and function correctly. The two critical requirements are: each WLC must have a unique Redundancy Management Interface (RMI) IP address (Option B), and both WLCs must run identical IOS XE software versions (Option D). The Redundancy Management Interface is the dedicated in-band control channel over which the active and standby WLCs exchange state synchronization information, keepalive messages, and configuration updates. Each controller requires its own unique RMI IP address within the same subnet - the active uses one address and the standby uses another. If they shared the same RMI IP (Option C), there would be an IP address conflict preventing the interface from functioning. Identical software versions (Option D) are mandatory because the SSO state synchronization protocol and data structures must be version-compatible between the active and standby controllers. Any mismatch in IOS XE version will prevent SSO formation. License count (Option A) does not need to be identical for SSO. Service port IP addresses (Option E) must be unique per controller, not identical.
Reference: WLSD Study Guide - Catalyst 9800 SSO Prerequisites, Redundancy Management Interface Configuration, High Availability Pair Formation Requirements.
NEW QUESTION # 19
A customer has a Cisco wireless network with two Cisco Catalyst 9800 Series WLCs in a high availability cluster, 50 Cisco 2800I APs, and all SSIDs and services are 5 GHz only. A security mandate requires that rogue APs be scanned and identified in 2.4 GHz and 5 GHz bands without impacting existing client connectivity. How must the wireless network be reconfigured to meet the requirement without purchasing additional APs?
Answer: A
Explanation:
The Cisco Aironet 2800 Series APs feature a dual-radio architecture with a dedicated 5 GHz radio (slot 1) and a Flexible Radio Assignment (XOR) radio (slot 0) that can operate in either 2.4 GHz or 5 GHz, or be assigned to monitor mode for scanning functions. Since all existing SSIDs and services are 5 GHz only, the slot 1 (dedicated 5 GHz) radio is responsible for all current client connectivity and must remain in Client Serving mode to maintain uninterrupted service. The XOR radio (slot 0) is currently either operating as a secondary 5 GHz radio or idle. By setting the XOR radio to Monitor mode, it becomes a dedicated scanner that continuously scans all channels across both 2.4 GHz and 5 GHz spectrum for rogue AP detection, using the embedded CleanAir and WIDS capabilities. This covers the previously unmonitored 2.4 GHz band and provides supplementary 5 GHz monitoring. No additional APs need to be purchased because the existing AP's XOR radio is repurposed.
NEW QUESTION # 20
A school deploys a Cisco wireless infrastructure in its classrooms to support a high density of mobile devices. The network administrator wants to bond channels in groups of two and only allow APs to send 802.11 management frames at 24 Mbps. What should be included in the design to accomplish this objective?
Answer: A
Explanation:
For a high-density classroom deployment using 5 GHz with channel bonding in groups of two (40 MHz channels), the correct configuration is to set the channel width for 802.11a (5 GHz) to 40 MHz and set the 24 Mbps data rate to Mandatory. Channel bonding refers to combining two adjacent 20 MHz channels into a single 40 MHz channel, doubling the channel width. Since the requirement specifies 5 GHz operation (where high-density design is appropriate), this must be applied to the 802.11a radio profile, not 802.11b (which operates only on 2.4 GHz). Setting 24 Mbps as Mandatory ensures that APs transmit management frames (beacons, probe responses, and other control frames) only at 24 Mbps -- this is how the 'only allow APs to send 802.11 management frames at 24 Mbps' requirement is implemented.
NEW QUESTION # 21
......
With these adjustable Designing Cisco Wireless Networks (300-110) mock exams, you can focus on weaker concepts that need improvement. This approach identifies your mistakes so you can remove them to master the 300-110 exam questions of BootcampPDF give you a comprehensive understanding of 300-110 Real Exam format. Self-evaluation by taking practice exams makes your Cisco 300-110 exam preparation flawless and strengthens enough to crack the test in one go.
New 300-110 Exam Vce: https://www.bootcamppdf.com/300-110_exam-dumps.html