1z0-1075-25인증시험은Oracle사의 인중시험입니다.Oracle인증사의 시험을 패스한다면 it업계에서의 대우는 달라집니다. 때문에 점점 많은 분들이Oracle인증1z0-1075-25시험을 응시합니다.하지만 실질적으로1z0-1075-25시험을 패스하시는 분들은 너무 적습니다.전분적인 지식을 터득하면서 완벽한 준비하고 응시하기에는 너무 많은 시간이 필요합니다.하지만 우리PassTIP는 이러한 여러분의 시간을 절약해드립니다.
| Section | Objectives |
|---|---|
| Topic 1: Manufacturing Cloud Fundamentals | - Core Manufacturing Processes - Oracle Manufacturing Cloud Overview |
| Topic 2: Work Definition and Planning | - Work Definitions and Versions - Items, Structures, and Routings |
| Topic 3: Work Execution Management | - Production Execution - Shop Floor Control - Exception and Exception Handling |
| Topic 4: Costing and Inventory Integration | - Inventory Transactions - Cost Management Integration |
| Topic 5: Supply Chain Integration | - Procurement and Fulfillment Alignment - Planning Integration |
| Topic 6: Quality and Inspection | - Nonconformance Management - Quality Inspection Integration |
| Topic 7: Reporting and Analytics | - OTBI and Dashboards - Manufacturing Reports |
만약 여러분은Oracle 1z0-1075-25인증시험취득으로 이 치열한 IT업계경쟁 속에서 자기만의 자리를 잡고, 스펙을 쌓고, 전문적인 지식을 높이고 싶으십니까? 하지만Oracle 1z0-1075-25패스는 쉬운 일은 아닙니다.Oracle 1z0-1075-25패스는 여러분이 IT업계에 한발작 더 가까워졌다는 뜻이죠. 하지만 이렇게 중요한 시험이라고 많은 시간과 정력을 낭비할필요는 없습니다. PassTIP의 완벽한 자료만으로도 가능합니다. PassTIP의 덤프들은 모두 전문적으로 IT관련인증시험에 대하여 연구하여 만들어진것이기 때문입니다.
질문 # 15
Which three statements are true about executing rework work orders with manual control?
정답：B,C,E
설명：
In Oracle Manufacturing Cloud, executing rework work orders with manual control requires certain steps and restrictions to ensure proper tracking of rework activities:
* Statement A : You can perform operation completion only after the assembly item has been issued to the work order. The quantity that can be completed is limited to the quantity of the assembly issued.
* Statement C : The assembly item must be manually issued to the work order, allowing for flexibility to issue either a partial or full quantity depending on the rework requirements.
* Statement D : Once a work order is released and transactions have been performed, it cannot be canceled. This ensures that work orders already in progress are tracked properly.
Incorrect options:
* Statement B : This is incorrect because you cannot cancel the work order after performing transactions.
* Statement E : This statement is irrelevant in the context of executing rework work orders with manual control.
Oracle Cloud SCM documentation explains the steps and restrictions for manually controlling and issuing rework work orders, including limits on cancellation and operation completion.
질문 # 16
In which three ways does Supply Chain Orchestration enrich supply requests with project details to support outside processing for a project-specific work order?
정답：A,B,C
설명：
Supply Chain Orchestration (SCO) plays a vital role in managing project-specific work orders, particularly for outside processing. Here's how it enriches supply requests with project details:
* Statement B : Expenditure Item Date is set to the requested need-by date and Expenditure Organization is set to the manufacturing plant - In project-specific work orders, Supply Chain Orchestration assigns the need-by date as the Expenditure Item Date. The Expenditure Organization is typically set to the manufacturing plant handling the work order.
Oracle Fusion Project-Driven Supply Chain documents this behavior, showing how expenditure details are linked to the project for costing purposes.
Statement D : Supply Chain Orchestration initiates the creation of a requisition with the project details - SCO automatically creates a requisition with all relevant project details, such as project number, task, and expenditure information. This ensures that the procurement process is aligned with the project's financial and material requirements.
Reference : Oracle SCM Cloud Supply Chain Orchestration User Guide details the automated creation of requisitions with project data for external processing.
Statement E : Expenditure Type is set to the expenditure type associated with the outside processing item - In Oracle Cloud, expenditure types must align with the specific processing items. SCO ensures that the correct expenditure type is applied to the work order and subsequent requisitions.
Reference : Project Financial Management guides in Oracle SCM Cloud explain how expenditure types are associated with items, ensuring accurate costing.
Incorrect Statements:
Statement A : SCO does not initiate the creation of a purchase order without the work order. A work order is essential for processing the outside work, and its absence would disrupt the orchestration process.
Statement C : The Expenditure Item Date is not set to the receipt date but rather to the requested need-by date for proper alignment with project scheduling.
질문 # 17
Your client ' s company is in a regulated industries and must keep detailed records of their product manufacturing processes in accordance with the United States Food and Drug Administration (FDA) regulation on electronic records and signatures called 21 Code of Federal Regulations (CFR) Part 11.
You are implementing Oracle E-Signatures and E-Records for securely capturing, storing, retrieving, and printing electronic records and signatures in manufacturing. They enable Deferred Electronic Records and Electronic Signatures for Manufacturing Work Order Release in Oracle Manufacturing Cloud.
Which statement is NOT true about using Deferred Electronic Records and Electronic Signatures for Manufacturing Work Order Release?
정답：C
설명：
When implementing Oracle E-Signatures and E-Records for compliance with 21 CFR Part 11 in regulated industries like the pharmaceutical or food industries, certain processes govern how electronic records and signatures are managed for manufacturing work orders. The statement that is not true is:
* Statement B is incorrect because when using deferred electronic records and signatures, the work order is not held in a " Released " status until approvals are obtained . Instead, the work order is placed in a " Pending Approval " state until signatures are collected and approval is granted. Only after approval does the work order move to a " Released " status.
Correct statements:
* Statement A : E-records are generated at the time of work order release, and notifications are sent to approvers for review.
* Statement C : Rejected e-records can be resubmitted for approval if necessary.
* Statement D : These capabilities are supported for both discrete and process manufacturing work orders.
Oracle Cloud documentation on " E-Signatures and E-Records " explains the approval process for electronic records, and the steps work orders go through from creation to approval.
질문 # 18
You are implementing project-driven supply chain functionality. You need to set up movement requests to issue or transfer project material to manage the inventory associated with projects and tasks.
Which two are types of movement requests to issue or transfer project material?
정답：A,C
설명：
When setting up movement requests in a project-driven supply chain, you need to manage inventory associated with specific projects and tasks. The two correct types of movement requests in this context are:
* Statement A : Transfer project material from one subinventory to another - This is a standard type of movement request in Oracle Cloud, allowing project materials to be transferred between subinventories.
It is essential for managing inventory tied to specific projects and tasks, ensuring that materials are available where needed for project execution.
Oracle Fusion SCM Cloud: Inventory Management Guide describes how material transfers can be executed between subinventories, including project-based transfers.
Statement D : Perform manual pick for such movement requests using the project material, common inventory, or inventory from another project - Manual picking for project-specific material is another supported operation. It allows users to perform manual picks from various sources, such as project material, common inventory, or even inventory from other projects.
Reference : Oracle Project-Driven Supply Chain documentation explains how manual picks can be configured to source inventory based on project requirements.
Incorrect Statements:
Statement B : Pick transactions are not interfaced specifically by project costing. Although project costing is relevant for tracking costs, it is not the driving factor behind pick transactions.
Statement C : There is no concept of creating a movement receipt line with the " Project Costing widget " in Oracle Manufacturing Cloud.
질문 # 19
An employee is responsible for dealing with different manufacturing practices and processes, machines, tools, and equipment that turn raw material into a product.
Which seeded job role must you assign to this employee?
정답：C
설명：
In Oracle Manufacturing Cloud, the Manufacturing Engineer role is responsible for dealing with various manufacturing practices, processes, machines, tools, and equipment that transform raw materials into finished products. This role focuses on defining and managing production processes, resources, and operations in manufacturing plants.
* Manufacturing Engineer : This role involves creating and maintaining manufacturing processes, production resources, and work instructions. It ensures that products are manufactured efficiently and in compliance with quality standards.
Oracle Cloud documentation for " Manufacturing Engineer " describes this role as the primary one for handling manufacturing setups, process definitions, and equipment management in the system.
질문 # 20
......
Oracle 1z0-1075-25 덤프는 Oracle 1z0-1075-25 시험의 모든 문제를 커버하고 있어 시험적중율이 아주 높습니다. PassTIP는 Paypal과 몇년간의 파트너 관계를 유지하여 왔으므로 신뢰가 가는 안전한 지불방법을 제공해드립니다. Oracle 1z0-1075-25시험탈락시 제품비용 전액환불조치로 고객님의 이익을 보장해드립니다.
1z0-1075-25최신버전 시험대비 공부문제: https://www.passtip.net/1z0-1075-25-pass-exam.html