As you know, the low-quality latest H35-581_V2.0 exam torrent may do harmful influence on you which may causes results past redemption. Whether you have experienced that problem or not was history by now. The exam will be vanquished smoothly this time by the help of valid latest H35-581_V2.0 exam torrent. Written by meticulous and professional experts in this area, their quality has reached to the highest level compared with others’ similar H35-581_V2.0 Test Prep and concord with the syllabus of the exam perfectly. Their questions points provide you with simulation environment to practice. In that case, when you sit in the real H35-581_V2.0 exam room, you can deal with almost every question with ease.
Huawei H35-581_V2.0 (HCIP-5G-RNP&RNO V2.0) certification exam is an important test for those who are seeking to advance their careers in 5G technology. HCIP-5G-RNP&RNO V2.0 certification is designed to validate the skills and knowledge of professionals who are involved in the planning, design, deployment, optimization and maintenance of 5G radio access networks (RAN) and radio network optimization (RNO).
>> H35-581_V2.0 Excellect Pass Rate <<
Are you worried about the security of your payment while browsing? H35-581_V2.0 test torrent can ensure the security of the purchase process, product download and installation safe and virus-free. If you have any doubt about this, we will provide you professional personnel to remotely guide the installation and use. The buying process of H35-581_V2.0 Test Answers is very simple, which is a big boon for simple people. After the payment of H35-581_V2.0 guide torrent is successful, you will receive an email from our system within 5-10 minutes; click on the link to login and then you can learn immediately with H35-581_V2.0 guide torrent.
Huawei H35-581_V2.0 (HCIP-5G-RNP&RNO V2.0) Exam is a rigorous exam that requires candidates to have a deep understanding of 5G radio networks and the technical aspects of network planning and optimization. It is an excellent certification for professionals who want to demonstrate their expertise in 5G radio network planning and optimization and enhance their career prospects in this field.
NEW QUESTION # 60
Which of these statements about the downlink scheduling process are correct?
Select All that Apply
Answer: A,B,C
Explanation:
Options A, B, and D represent the intended downlink scheduling principles described in the updated question bank.
Downlink scheduling is controlled by the gNodeB, which assigns radio resources and selects transmission parameters according to channel conditions, traffic demand, interference, and retransmission requirements.
Option A: Interference randomization can be used as an interference-management technique in heavily loaded radio networks. Its purpose is to reduce persistent interference effects by varying the relevant transmission or resource-allocation characteristics. However, enabling a particular Huawei interference- randomization feature at high PRB utilization is an implementation-specific recommendation.
Option B: The gNodeB uses HARQ acknowledgment information reported by the UE to determine whether transmitted downlink data has been successfully decoded or whether retransmission may be required.
Option D: Channel Quality Indicator (CQI) feedback provides information about the radio channel and supports Modulation and Coding Scheme (MCS) selection. Higher-quality conditions generally permit higher- order modulation and more efficient coding.
Option C is incorrect because downlink scheduling does not universally require an explicit scheduling request initiated by the UE.
The gNodeB already manages downlink data queues and can schedule available downlink traffic according to the configured scheduling mechanism.
Therefore, A, B, and D are the intended selections.
Official Reference: 3GPP TS 38.214, Sections 5.1 and 5.2, PDSCH Procedures and CSI Reporting ; TS
38.321, Section 5.3.2, Downlink HARQ Operation .
Technical warning / qualification: Options B and D are supported by standardized mechanisms. Option A is a vendor-specific optimization recommendation and requires confirmation against the Huawei scheduling feature documentation for the relevant release.
NEW QUESTION # 61
Which physical channel is used to transmit ACK/NACK for 5G uplink data?
Answer: D
Explanation:
The Physical Downlink Control Channel (PDCCH) is the closest applicable choice for the HARQ control mechanism associated with 5G NR uplink data transmissions.
In NR, uplink user data is transmitted through PUSCH. The gNodeB receives and decodes the transmitted transport block and determines whether retransmission is necessary.
Unlike LTE, NR does not define the Physical Hybrid ARQ Indicator Channel (PHICH) for explicit acknowledgment of uplink transmissions.
Instead, NR employs asynchronous uplink HARQ operation controlled through scheduling information provided by the gNodeB.
The PDCCH carries Downlink Control Information (DCI), including uplink grants specifying the HARQ process identifier, New Data Indicator (NDI), and redundancy version.
When retransmission is required, the gNodeB can schedule the corresponding HARQ process again without toggling its NDI.
When new data is scheduled for the same process, the NDI toggles, allowing the UE to distinguish new transmission from retransmission.
PUCCH , by contrast, carries HARQ-ACK feedback transmitted by the UE for downlink PDSCH reception.
It does not carry acknowledgment information from the gNodeB for uplink PUSCH reception.
Therefore, PDCCH is the closest answer, but it carries uplink HARQ scheduling instructions rather than an explicit standalone ACK/NACK indication.
Official Reference: 3GPP TS 38.321, Sections 5.4.1-5.4.2, UL Grant Reception and HARQ Operation ; TS
38.212, Section 7.3.1, DCI Formats .
Technical warning / qualification: The document's explanation selects PUCCH, but this confuses feedback transmitted on the uplink for downlink data with feedback concerning uplink data . A technically correct version should ask: Which physical channel carries DCI used to control HARQ retransmissions for 5G NR uplink data? The answer would then be C.
NEW QUESTION # 62
If a cell covers a high-speed railway on which UEs travel at 250 km/h, which PRACH format should be selected for that cell?
Answer: D
Explanation:
PRACH Format 3 is the intended selection because its 5 kHz subcarrier spacing provides greater tolerance to Doppler shift than the 1.25 kHz spacing associated with the other listed long-preamble formats.
The Physical Random Access Channel (PRACH) is used by the UE to initiate random-access procedures, including initial access and applicable mobility-related synchronization procedures.
In high-speed railway environments, rapidly moving UEs experience significant Doppler frequency shifts due to their motion relative to the serving base station.
Doppler shift is approximately proportional to carrier frequency and radial velocity.
At a UE speed of 250 km/h, the Doppler frequency can become sufficiently large to impair correlation and detection performance when narrow PRACH subcarrier spacing is used.
According to the standardized PRACH configurations, Formats 0, 1, and 2 use 1.25 kHz subcarrier spacing, while Format 3 uses 5 kHz.
The wider spacing reduces the relative frequency-offset sensitivity of the random-access preamble, helping improve detection reliability in high-mobility conditions.
PRACH planning must also account for maximum cell radius, propagation delay, cyclic prefix, and configured random-access occasions.
For the listed long-preamble formats and the stated high-speed scenario, Format 3 is therefore the preferred answer.
Official Reference: 3GPP TS 38.211, Section 6.3.3, Physical Random Access Channel ; TS 38.101-1, Section 6.3.3.4, Table 6.3.3.4-1, PRACH ON Power Measurement Period .
NEW QUESTION # 63
How many consecutive symbols does each SSB occupy in the time domain?
Answer: C
Explanation:
Each Synchronization Signal and Physical Broadcast Channel Block (SSB), formally identified as an SS
/PBCH block, occupies four consecutive Orthogonal Frequency Division Multiplexing (OFDM) symbols in the time domain.
In 5G NR, the SSB provides essential information for initial cell search, synchronization, physical cell identity detection, and acquisition of broadcast system information.
According to 3GPP TS 38.211, Section 7.4.3.1, an SS/PBCH block occupies four consecutive OFDM symbols, numbered 0 through 3.
The SSB contains the Primary Synchronization Signal (PSS), Secondary Synchronization Signal (SSS), Physical Broadcast Channel (PBCH), and associated PBCH Demodulation Reference Signals (DM-RS).
The PSS enables the UE to detect a component of the physical cell identity and establish initial timing synchronization.
The SSS provides the remaining information required to determine the complete physical cell identity and assists synchronization.
The PBCH carries the Master Information Block (MIB), which provides essential configuration information for acquiring further system information.
In the frequency domain, each SSB spans 240 contiguous subcarriers.
Although multiple SSBs may be transmitted within an SSB burst set to support beam sweeping, the time- domain duration of an individual SSB remains exactly four consecutive OFDM symbols.
Official Reference: 3GPP TS 38.211, Section 7.4.3.1, Time-Frequency Structure of an SS/PBCH Block , Table 7.4.3.1-1.
NEW QUESTION # 64
Which of the following channels or signals uses the same transmit power as the PUSCH?
Answer: D
Explanation:
In NR, SRS is transmitted by the UE to provide uplink channel-sounding information for scheduling, channel estimation, beam management, and MIMO-related procedures.
The SRS transmission-power calculation follows the uplink power-control principles specified in 3GPP TS
38.213.
These principles include configured target-power parameters, transmission bandwidth, estimated path loss, path-loss compensation, and applicable closed-loop adjustments.
Under certain configurations, SRS may share a power-control adjustment state with PUSCH. Under other configurations, separate adjustment states and SRS-specific parameters are used.
Consequently, SRS transmission power is related to the PUSCH power-control mechanism but is not necessarily numerically identical to PUSCH transmit power .
PRACH has its own random-access transmit-power and power-ramping procedures.
PUCCH uses a separate uplink power-control calculation, while PDSCH is a downlink physical channel.
The intended comparison therefore points toward SRS, represented incorrectly as SRC in the original choices.
Official Reference: 3GPP TS 38.213, Sections 7.1 and 7.3, PUSCH and SRS Transmit Power Control .
Technical warning / qualification: Replace option C, SRC , with SRS . The question should also state uses a related power-control mechanism rather than uses the same transmit power , because the latter is not universally correct.
NEW QUESTION # 65
......
Braindumps H35-581_V2.0 Pdf: https://www.trainingdumps.com/H35-581_V2.0_exam-valid-dumps.html